Garden

Experienced gardeners share their insights in answering this question :
It makes a 32 x 35 bale and takes at least 120 hp to run it at full speed (forget about it if its damp out) , don’t remember the clearances you need to get it inside the barn , but it wasn’t any taller or wider than my JD 4850 that I do remember , ive sold my 1010 now so I cant go out and measure it 4 you

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

$35,000.00. 2020 New Holland BC5000 Small Square Baler BC5070 Hayliner.
A HISTORY IN SQUARE BALING INNOVATION

Today, all BigBalers are produced in Zedelgem, Belgium, New Holland`s Centre of Harvesting Excellence, where they are designed, manufactured, tested and shipped the world over.

One size fits all. Dimensions: 7.31 Inch (185mm) Length x 3.68 inch (93mm) Width. Measurements are approximate.
“Large round balers come in a wide range of sizes. The smallest balers produce a full-sized bale that is approximately 4 feet wide by 5 feet in diameter. The largest balers make bales that are 8 feet wide by 6 feet in diameter.
New Holland compact tractors are manufactured in several locations, including the United States, China, Brazil, etc. The company has multiple production facilities located in the US and Europe. But, their main manufacturing unit is in Italy under CNH Global Industries.
New Holland equipment is manufactured all around the world; the current administrative headquarters are in Turin, Italy, with New Holland, Pennsylvania serving as the brand`s headquarters for North America and home of the largest hay tools production facility in the world.
“Large round balers come in a wide range of sizes. The smallest balers produce a full-sized bale that is approximately 4 feet wide by 5 feet in diameter. The largest balers make bales that are 8 feet wide by 6 feet in diameter.
The Hayliner 265 is perfect for traditional baling operations with its 65-inch wide five-bar SuperSweep™ pickup, heavy flywheel, and fast, 93 strokes-per-minute plunger speed.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

New holland troubleshooting
ANSWER : Howdie Best Bet IS Call the Dealer They Will Know It Faster then Me Thks

Read Full Q/A … : Garden

Would like to know the height width and lenght of a new holland D1010 hay baler 1999 model thanks
ANSWER : It makes a 32 x 35 bale and takes at least 120 hp to run it at full speed (forget about it if its damp out) , don’t remember the clearances you need to get it inside the barn , but it wasn’t any taller or wider than my JD 4850 that I do remember , ive sold my 1010 now so I cant go out and measure it 4 you

Read Full Q/A … : Garden

How do I replace hay baler belt fasteners?
ANSWER : Depending on model of baler/belts you would shave of enough rubber to get a smooth surface.then put tool in vise with fastener in it,be sure pin is in slot when crimping or fastener teeth will not be squared up in belt and make it hard to get belt pin lined up when putting back together.Is there paper along each side of fastener?If so leave it there until done crimping.

Read Full Q/A … : Garden

7030e not starting .i replace commmn rail.injector…
ANSWER : Did you fully purge the air out of the system?
Prime the system

Read Full Q/A … : Garden

1999 ford expiodition
ANSWER : Use a pressure gauge to check pressure at the rail. Change fuel filter. Replace fuel pump if needed.

Read Full Q/A … : Garden

How do you remove the ignition coil? I can remove the bolt quite easily, but how do you remove the post which secures the other end of the coil?
ANSWER : Would of been very helpful if you would of mentioned the engine you are working on… model/serial numbers would of been even better !!!

Read Full Q/A … : Garden

I have a husqvarna 323L string trimmer. I stored it after running the tank & carb dry for about two years. I fueled it, then started it, & it ran for a minute then died like I turned the switch off. Since it would not restart, I found the fuel filter had broken off the hardened fuel line & it sucked gummy crap out of the tank & into the carb. Failing at cleaning the carb, I finally put a new carb on it & replaced the pump, hoses & filter. It has ran good till this year. I winterized it with stabilizer & left it with a full tank over the winter. The gas in the tank was gone when I got ready to use it this year. I filled the tank with premix, checked for leaks, then started it. It would run fine for about half a tank, start idling poorly (lean) then cutoff & refuse to restart till I refilled the tank. I finally found the tank had cracks & was letting pressure out of the tank & apparently this was causing the carb to lose it’s ability to siphon gas out of the tank. So I replaced the tank which came with new hoses & a filter, which I properly installed to the carb. It cranked right up, but when it runs a half tank, the carb quits sucking gas out of the tank. When I pump to prime the carb, it moves the fuel into the carb, but the pump never gets hard like it does when I prime the carb when the motor is cold. I have to keep refilling the tank, prime, & then it starts & runs until the tank gets about half empty. The new fuel filter is down in the gas tank properly, but It will not run after it shuts off until I refill the tank & prime. I’m baffled. New tank, new hoses, new filter, new carb, & I can find no leaks in the fuel system. It runs strong. The 323L is a two-stroke & it always cranks on the second pull from cold on a full tank. Any ideas?
ANSWER :

Read Full Q/A … : Garden

I cannot pull the lever back on my Toro Grandstand in order to lift the blade into the height I would like. Would you know how to fix this?
Thank you
ANSWER : Have you ever oiled all the little working parts on your mower? The adjusters also get dry and they rust up or just get dirty. You can try to oil all the areas that move on the height adjusters and see what happens.

Read Full Q/A … : Garden