Briggs & Stratton

Experienced gardeners share their insights in answering this question :
YOU NEED TO HAVE THE VALVES SET THAT SHOULD FIX YA UP LET ME KNOW IF THIS HELPS YOU

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

Your Mower Won`t Start:

Other possible causes include: Loose, Dirty or Disconnected Spark Plug in Your Lawn Mower: Check it out, clean off debris, re-connect and tighten. Dirty Air Filter: Clean or replace. Fuel Not Reaching the Engine: Tap the side of the carburetor to help the flow of gas.

Q. Why is my lawn mower turning over but not starting? The most likely reason is bad gas. Gas that sits for many months during the off-season will eventually break down, gumming up the fuel line and carburetor in the engine and preventing it from starting.
If the engine holds compression well, and the fuel system is working correctly, but it still won`t start, that tells us that your car`s spark plugs may not be working. The spark plugs ignite the air/fuel mixture inside the engine`s cylinders. It`s the resulting explosion that actually powers your car.
Why won`t my car start but I have power? If you attempt to start up your car but the engine won`t turn over and the dashboard lights up, then you most likely have an issue with your battery. You could have a damaged or corroded battery terminal, which is stopping the engine from starting up when you fully turn the key.
Your lawn mower turning over but not starting due to several reasons, such as a faulty or disconnected plug, a disconnected spark plug wire, a clogged air filter, or a contaminated fuel tank. A faulty carburetor, a dirty cutting deck, or a dysfunctional flywheel brake can also cause this.
If the starter motor spins but does not crank the engine, you likely have a problem with… Faulty or damaged battery. To address this issues, check the battery and charging system for problems.
Your lawn mower turning over but not starting due to several reasons, such as a faulty or disconnected plug, a disconnected spark plug wire, a clogged air filter, or a contaminated fuel tank. A faulty carburetor, a dirty cutting deck, or a dysfunctional flywheel brake can also cause this.
Why Is My Lawnmower Turning Over But Not Starting? If you pull the cord and hear your engine turn over, but your mower is not starting, the most common reasons for this are low fuel, a broken gas valve, or a bad choke fault. A broker spark plug could also be the culprit.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

I have craftsman 18.5 horse riding mower when i turn key its like battery does not have enough power to turn engine over,was wondering if it could be the starter cause battery is good.
ANSWER :

Read Full Q/A … : Briggs & Stratton

Power hog does not want to turn on I do have power just wondering if it is the brushes
ANSWER :

Read Full Q/A … : Briggs & Stratton

On my cu cadet zero turn only the left side turns and the right side moans but wont move ever with the release lever to free wheel released
ANSWER : Check the hydraulic oil level for the hydrostat drives(if it has a reserve tank located under the seat. Some ZT’s don’t have the reserve tank. Don’t over fill that tank. 1/4 inch above the bottom is all it needs.)

Also, check the steering arm bolts. Very often they work themselves loose and the arm doesn’t pull the valve rod that controls the hydrostat unit.

Read Full Q/A … : Briggs & Stratton

Carb problems wont stay running unless i unplug and plug in the anti diesel switch the plug on the fuel bowl
ANSWER : Check and see if all your carb jets or clean sound like some dirt got into one

Read Full Q/A … : Briggs & Stratton

Why wont my blade engage
ANSWER : Bad pto clutch shorting out

Read Full Q/A … : Briggs & Stratton

My zero turn will not go forward or backward with engine running and blades engaged was running fine went to turn corner and it stopped and wont move
ANSWER : Check your drive belt. May have broke or come off

Read Full Q/A … : Briggs & Stratton

I have a craftsmen lt2000 lawn tractor with the 17.5 hp kohler pro motor that wont start. It turns over and spits and sputtors but wont fire . I have good blue spark from a new plug and good voltage from a new battery , it has a new fuel filter , new air filter , new oil filter and fresh oil , i even installed a brand new carburetor thinking that it was just clogged up from sitting for a year , i checked the fly wheel key to see if it was sheared but it is good and turns the crank just fine. I cleaned the contacts on the flywheel and the face of the coil. The muffler is clear and breathing fine. I read somewhere that these motors are subject to valve timing problems , can anyone elaborate or think they know what the problem is , i’m at my wits end and don’t know what else to do . Please help!
ANSWER : If your carb. has a bowl under it with a screw and rubber washer holding it on,it may have trash in there,need to crimp fuel line first to keep gas from going every where,a float is in the bowl.Follow fuel line to carb.

Read Full Q/A … : Briggs & Stratton

Just replaced pto clutch brand new ,wont engage.nothing, zip not a movement.
ANSWER : Check that you are getting voltage to the wires that connect to the clutch when you switch on the pto. If not check that you are getting voltage to the pto switch. If you are the pto switch is faulty. Regards Phil

Read Full Q/A … : Briggs & Stratton