Electric Pole Saw
Experienced gardeners share their insights in answering this question :
Http://www.remingtonpowertools.com/product_detail.cgi?file=11.207
How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
Most saws use 0.325″, 3/8″, or 0.404″ pitch, with 1/4″ less common. Most consumer saws use a type of 3/8″ chain called “low profile”. We call it Picco. A few older saws use 1/2″ pitch chain.
There are three main reasons for a chain to come off: Incorrect bar and/or chain for the saw; check to be sure that you are using the proper chain pitch, gauge and number of drive links to match the guide bar. Chain not properly tensioned; It is normal for a new chain to stretch and require frequent adjustment.
Your chain saw bar may have the information you are looking for stamped right into it. It can usually be found near the back of the bar, where it mounts to the saw. For instance, in the example on the right, the chain is 3/8” pitch and . 050” gauge with 72 drive links.
It might be that the chain is worn, has a stiff or bent link, or has become clogged up with dirt. A visual inspection while turning the cranks should reveal if there`s a problem here. The chainring, or a chainring tooth, could be bent. Again, a visual check will tell you what you need to know.
Most modern chainsaws, string trimmers, leaf blowers and other small-engine two-stroke equipment recommend a 50:1 oil mix ratio, but some recommend 40:1 and older two-stroke equipment might even call for 32:1.
043″ Gauge (R44)
Basically, it`s the size of, and spacing between links. For the same number of links, a 3/8” chain is longer. This also means that the shape of the sprocket at the motor and at the tip of the sword are different. 3/8” and 0.325” chains are NOT interchangeable.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
Need a replacement guide bar for a Model 106821 A Remington pole chain saw.
ANSWER : I found an operator’s manual but it doesn’t include an IPL. I wasn’t able to find any IPL for this item. I’d suggest you try the manufacturer here:
Remington.com
http://www.remingtonpowertools.com/find_manual.cgi
HTH
Lou
Remington.com
http://www.remingtonpowertools.com/find_manual.cgi
HTH
Lou
Read Full Q/A … : Electric Pole Saw
What length replacement chain is needed for chain #104301S for pole saw typmodel 104316-04? Thank you.
ANSWER : Mr/Ms McGregor;
Take your existing chain to a local chainsaw shop. They will use it as a pattern to make a suitable replacement. Chain size is dependent on the number of drive links not bar or chain diameter. If you don’t have an existing chain take saw and bar. HTH
Lou
Take your existing chain to a local chainsaw shop. They will use it as a pattern to make a suitable replacement. Chain size is dependent on the number of drive links not bar or chain diameter. If you don’t have an existing chain take saw and bar. HTH
Lou
Read Full Q/A … : Electric Pole Saw
Is 10-30w car oil ??? Okay to use as the Oil on the Chainsaw Bar of a Remington Pole Saw Model 106890-02?
ANSWER : Car engine oil has not got a non fling addative so will just spray off the end of the bar and not lubricate the chain where it does most of its cutting, on the underside of the bar.
Read Full Q/A … : Electric Pole Saw
Saw will not run – Remington Electric Chain Saw
ANSWER : Could be a bad power cord, bad switch or bad brushes/springs in the motor. An AC voltmeter is helpful for tracking down these types of problems. Good luck!
Read Full Q/A … : Electric Pole Saw
Remington pole chain saw model 106890-02. Chain
ANSWER : We are in no way connected with RemingtonPower. They are no longer in production and replacement parts are very difficult to find. Often eBay is your only source of parts. Sorry. Lou
Read Full Q/A … : Electric Pole Saw
How can i get a manual for this? – Remington Rm1415a 14" Limb N Trim Electric Chain Saw 8a
ANSWER : REMINGTON RM1415A Manuals
Read Full Q/A … : Electric Pole Saw
Remington electric Pole Chain saw – what type of oil do I use?
ANSWER : Use regular bar/chain oil available from home centers, hardware stores, and saw shops. Good luck!
Read Full Q/A … : Electric Pole Saw
I was using the saw as a chain saw last weekend to cut up an old tree stump when the chain came off. I don’t know how to access it to put it back on and don’t have a user manual. The saw belonged to my late father and I don’t know if he even kept the manual.
ANSWER : You will have to remove the cover on the side the chain bar goes into. There should be one or two nuts holding the cover on the side. The is also a chain tension adjuster you may have to loosen to put it back on. Make note of the direction of the teeth on the chain. It is an directional chain. The tension adjuster is usually a flat head screw on the front side right beside the chain bar.Unless it is a really old saw, manuals are available from most manufacturers for free download. See if you can locate a brand name and model number.
Read Full Q/A … : Electric Pole Saw
