420,1020,2010,2020,2510,2520 Tractor Float

Serial number plate reads T213R 153223R

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

Manufactured between the years of 1963 and 1972, the John Deere 4020 may be one of the most talked-about John Deere machines ever!
The 10-character year symbol is included in the 17-character Vehicle Identification Number (VIN) used by John Deere to identify vehicles. The year of manufacture of your tractor is stated in the VIN`s tenth character. If the tenth character is P, the year 2010 would be the manufacturer`s year.
The 2510 diesel made its debut in 1965 as a 1966 model and continued in production until 1968. The 2510 drew its engine from the 2020 installed in the chassis of the 3020, thus filling a market niche for a small to mid-size row-crop tractor. The tractor`s 180.43-cu.in.
EACH 4000 OR 4020 TRACTOR HAS THE FOLLOWING SERIAL NUMBER PLATES: BASIC TRACTOR AND ENGINE. THE BASIC TRACTOR SERIAL NUMBER PLATE IS LOCATED IN THE UPPER RIGHT-HAND CORNER AT THE REAR OF THE TRANSMISSION CASE. THE ENGINE SERIAL NUMBER PLATE IS LOCATED ON THE RIGHT-HAND SIDE OF THE ENGINE.
To determine the year of manufacture for a tractor with a six digit number use the following formula. Take the first and the fourth digit, and subtract three to get the year. For example, the serial number of 395602 would be: 36-3 = 1933.
Finding your model number and serial number is as easy as locating the identification tag on your machine. As seen in the example, the model number will be displayed below the MODEL heading (Example: Z235), and the serial number will be underlined on the top-right corner of the tag (Example: 130002).
John Deere responded with its first “General Purpose” tractor, the Model “GP,” in 1928. A few years later, Deere released its first true row-crop design in 1934 with the Model “A” and its smaller counterpart the “B,” in 1935. These tractors placed the company on a solid foundation within the industry.
Decal. The tractor model numbers are comprised of four positions. The first number designates the family while the next three numbers represent the approximate engine horsepower. The fifth and sixth positions are represented by a letter. The first letter indicates the level of capability or price a tractor has.
There were 15,008 Model 2510 made, but only 817 units were equipped like this one. The 2510 was a joint effort, the engine was designed by the Dubuque factory, the drivetrain was designed in Waterloo. It is the only 10 Series with Powershift transmission.
What we know about the John Deere 2510 tractor is that it has a 4 cylinder Gasoline, or Diesel Engine that produces 46.8 horsepower at the drawbar. Shown left is a picture of the John Deere 2510 tractor.
The 4020 is significant for its great popularity; over 184,000 units were built.
First and foremost is the tractor serial number, which is stamped into an aluminum plate located on the right side of your tractor, on the steering gear housing. Use the tractor serial number table to look up the year.
How to read a tractor serial number list: Tractor serial number lists nearly always show the first tractor built in each year. The other tractors for that year will have successively higher numbers. Your serial number should lie between two of the stated numbers.
For perspective sake, so far here in 2017 the average auction price on a 1964 John Deere 4020 is $9,345, up from last year`s average auction price of $6,213. 10 years ago (2007) the average auction sale price on 1964 model John Deere 4020 tractors was $7,240.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Which way do i install thermatate in john deere 4020
ANSWER : Looking at stat top part looks like a handle around it

John deere diesel 4039 over heating … thermostat appears to be working OK … new water pump has been installed but still over heating … new radiator has been installed but still over heating … other than overheating runs great and sounds great
ANSWER : If the engine is overheating temperature wise that’s one thing but if its blowing out the reservoir and your saying its overheating that’s another thing. Please let me know which one applies.

How do i replace a clutch on a JD 3020 tractor
ANSWER : Break it in half, then get with it.

Looking for information on a John Deere tractor S/N CH0850S017329 and the current estimated value of this tractor with approximately 2,700 hours on it.
ANSWER : Can you please post the model number of the tractor? Thanks

John deere 2140 had gas put in it instead of diesal what going to happen
ANSWER : Don’t run it until you’ve completely drained and flushed and refilled the fuel system, tank, lines, pump…Don’t run it! Diesel fuel is more of an oil whereas gas is more volitile… Avoid starting or running to prevent any damage to your engine!

My 1979 111 john deere lawn tractor deck blades shut off
ANSWER : If it has a clutch, that would be the problem. An electric clutch will kick on and off when it is hot if it is bad.

HAVE A JOHN DEERE 318 LAWN TRACTOR, CHANGED POINTS AND CONDENSER, WON’T TURN OVER, TRIED STARTING FLUID IN CARB AND NOTHING. CAN IT BE THE COIL AND HOW DO I CHECK? THANKS
ANSWER : Check the coil impedance on the primary and secondary side. You’ll have to disconnect the battery negative cable so you don’t short something out. Unplug the spark plug wires and the two sets of smaller wires connected to the primary side of the coil. The primary coil reading should be between 3.7 ohms and 4.6 ohms while the secondary (spark plug side) should be between 34.2 k-ohms and 41.6 k-ohms. If the resistance values you measure are outside of these ranges, you need to replace the coil.

My Tractor (425) won't start – John Deere 420,1020,2010,2020,2510,2520 Tractor Float
ANSWER : If you have no spark the first thing to replace the time delay module on the left rear side of engine. Its black and about 2 inches by 1 inch with yellow,red,orange and black wires going to it. Replacement is round shaped with same amount of wires.If no fuel to carb check for flow at filter, if theres flow but no pressure look for a split fuel line in tank between pump and sender.