Electric Chain Saw
Experienced gardeners share their insights in answering this question :
The oil is for the bar.any bar oil will work.don’t forget to vote for me.thanks
How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
Be sure to use bar chain oil, Not regular motor oil. (Your saw has standards).
The viscosity of chainsaw bar oil can vary, depending on the formula but 30W is standard. In cold weather, a thin 10W chainsaw oil may be advantageous, while very hot temperatures may require a much thicker 40W or 50W formula.
Does the pole saw use oil? Yes, bar and chain oil is required to properly lubricate the cutting system. Oregon Bar and Chain Oil is recommended for the PS250.
This means that the viscosity of this oil ranges (5w30) from 5 when it`s cold to 30 when it is hot. This oil is good lubricating for light-duty diesel and petrol engines. So, you can use it as a Chainsaw Bar Oil.
Although the motor does not require gas or any fuel additive, the chain will require `bar and chain` oil.
Bar-and-chain oil comes in two types: summer and winter. Egelhoff explains that summer and winter oils have different viscosity. Winter oil is thinner, allowing it to run smoothly even in cold temperatures and when stored for awhile. Summer oil is thicker, heavier and formulated to work in hot conditions.
Use for lubricating moving parts, pivot points and bearings. Lubricate small to larger motors found in sewing machines, fans, lawnmowers and trimmers, drills, chainsaws, and other tools.
You can run burnt motor oil as a substitute for bar oil. Now if you`re asking can you use SAE 30 as an engine lubricant rather than a good 2 cycle mix…the answer is no.
Any oil will work, even olive oil, except for that flinging at the top sprocket. there is an additive in chainsaw oil that makes it “stringy” and help it hold onto the chain links.
Pro Tip: Lubricate the sliding extendable poles of your tree trimmer as well as the pruner shears, lever arm, and blade with WD-40® Specialist® Dry Lube. The long-lasting corrosion protection does not attract dirt or debris and the formula provides superior lubrication with no oily residue.
Any oil will work, even olive oil, except for that flinging at the top sprocket. there is an additive in chainsaw oil that makes it “stringy” and help it hold onto the chain links.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
What kind of oil in the oil tank and how much for the remington electric pole saw ?
ANSWER : Bar & chain oil is the best. You can use regular or synthetic. Some say you can use atf (auto transmission fluid) or sae30 oil. I use bar & chain oil.
Read Full Q/A … : Electric Chain Saw
16″ Electric Chain Saw: what kind of oil is used for electric chain saw…
ANSWER : I assume you are asking about the oil for the chain. Any good quality “Bar and Chain Oil” will do fine. Do not use motor oil you use in your car engine as it will not properly lube the chain and will result in quicker dulling and early demise of the chain.
You can get the “Bar and Chain Oil” at most hardware stores or Farm Supply stores.
Read Full Q/A … : Electric Chain Saw
What kind of oil does it use for Remington 16’electric saw.
ANSWER : Use any bar and chain oil. Can be bought at most big-box-stores (Home Depot, Lowes) or stores that sell outdoor power equipment. Don’t use motor oil, you’ll have a mess when you store the saw.
Read Full Q/A … : Electric Chain Saw
Oil leaks out of the remington electric pole saw. The saw is stored/seated upright and I can’t see the problem
ANSWER : Remove the bar and chain, then clean the entire area. Look for leakage at either the small port where the bar fits, or from the motor case itself. Make sure the oil tank vent is open so that pressure doesn’t build up from heat. If the leakage is from the case, then look for a crack in the oil tank, or a defective oil line from the tank to the oil pump. Clean the drive end of the bar oil-channels that go out from the large holes to the chain groove on each side. Clean the entire chain groove. It also may be easier to just dump the oil out of the tank after each use if the chain seems to oiling properly. Hope this helps!
Read Full Q/A … : Electric Chain Saw
Is 10-30w car oil ??? Okay to use as the Oil on the Chainsaw Bar of a Remington Pole Saw Model 106890-02?
ANSWER : Car engine oil has not got a non fling addative so will just spray off the end of the bar and not lubricate the chain where it does most of its cutting, on the underside of the bar.
Read Full Q/A … : Electric Chain Saw
What kind of oil do I use ? – Remington Electric Chain Saw
ANSWER : Summer or winter weight chain oil. Same as for gas chainsaw. Available at Walmart.
Read Full Q/A … : Electric Chain Saw
Remington electric Pole Chain saw – what type of oil do I use?
ANSWER : Use regular bar/chain oil available from home centers, hardware stores, and saw shops. Good luck!
Read Full Q/A … : Electric Chain Saw
The manual says to use 10-weight oil on the bar when the temperature is below 30. I can’t find any straight 10-weight oil anywhere, in stores or on line. Does any company make straight 10-weight oil? Where can I purchase it?
ANSWER : 10W is air tool oil, or fork oil for suspension tubes, there are some air tool oils that are 5W. Did they call it 10 weight, or 10W? 10W means 10Winter, 10W-30 is 10Winter-30 Weight
Read Full Q/A … : Electric Chain Saw
