17.5 hp 42 in. Deck Lawn Tractor – CA Model

Experienced gardeners share their insights in answering this question :
That looks like a Sears mower so most likely yes it will but you would have to check with Sears to be sure.

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

The working width of the snowblower should exceed by 4″ or more the overall width of your tractor.
Cordless snow blowers are great for light snow and small areas. Single-stage snow blowers are for 6 to 12 inches of light snow. Two-stage snow blowers do well with up to 2 feet of moderate to heavy snow. Three-stage snow blowers are best for heavy snow, ice and slush up to 2 feet deep.
If you already own a lawn or garden tractor, you can add a snow blower attachment to it, enabling you to cozy up on your lawn tractor and let its powerful engine do the work.
The ideal ratio of power to intake size on a full-sized snow blower with a 20- to 21-inch intake height is 8 HP to 24-inches in width.
First, determine the total engine size in cubic centimeters. For this example, the engine size is found to be 750CC`s. Next, use the formula above to convert this value to horsepower. HP = CC/ 15 = 750 / 15 = 50 horsepower.
Engine sizes

From consumer-grade snow blower engines that are 200 cc, to midsize 200 to 400 cc engines, to professional-grade 400+ cc engines, engine size is an important factor to consider since it determines how much horsepower your snow blower produces and how much gas it consumes.

Look for professional snow blowers equipped with an engine of at least 400 CCs. Pick a snow blower clearing width that fits the properties you`re servicing. Biggest can be extremely efficient but it isn`t always the best option for clearing diverse areas like narrow walkways.
The manufacturer will usually have the recommended fuel octane, and, if it`s a 2-stroke engine, the Fuel / Oil ratio (e.g. 40:1) printed directly on the cap. MTD two-cycle snow throwers use a 50:1 ratio of gasoline to 2-cycle oil, which is one gallon of gasoline to 2.5 oz of 2-cycle oil.
Snowblowers work on any depth of snow. However, you will find the best results on snow deeper than two inches. There are some additional factors you should consider when removing snow including the type of snow and the surface you will be working with.
A snow blower can be used on a deck. The most practical application to do so is a single stage snow blower thanks to its lightweight design, though make sure the auger paddles are rubber, like on our 1X 21″ LHP Snow Blower model, so it won`t scratch up the wood.
What Models Does a John Deere 47-Inch Snowblower Fit? This versatile John Deere snowblower is compatible with Select Series™ X530, X534, X540, and X590 Multi-Terrain Tractors, giving operators plenty of options for their choice of machine.
Look for professional snow blowers equipped with an engine of at least 400 CCs. Pick a snow blower clearing width that fits the properties you`re servicing. Biggest can be extremely efficient but it isn`t always the best option for clearing diverse areas like narrow walkways.
A two-stage blower that`s 24 to 26 inches wide is typically best for handling about 6 to 18 inches of snow on an area that Sikkema says maxes out at roughly an 80-foot-long, two-car driveway.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Toro 826oxe – when the snow shoot is pointed to the left-it slowly rotates to the right. Can the shoot be tighten?
ANSWER : You may have sheared the shear pin under the fly wheel

Will not through snow more than 3 feet
ANSWER : Never knew any that would have to do it in stages when it’s too deep .

Put new belt on for 2nd stage still does not work augers work
ANSWER : Sounds like roll pin has broken that is on it. Look for a hole where pin slides through shaft. Use a hammer and punch to push out broken piece out. Make sure outer hole matches up with inner hole.

I have a craftsman snowblower model# 536886122..The drive doesn’t work. everything else works. went through deep snow in a high gear and it stalled when I started it back up it wouldn’t move
ANSWER : It has a sher pin that has sheard off look in the owners manual it will show you were its at when you got it it should have came with some

I forgot to add oil to my toro ccr powerlite e. should i remove the gas and start all over again?
ANSWER : !!!!!! dran the gas put in the neww mix gas and pray for the best

Mtd 31c won't stay running? – MTD Genuine Factory Parts Auger Belt for One-stage Snowblower
ANSWER : You probably have to take the carburetor apart and clean it using a spray type carburetor cleaner spraying the jets and small holes in it.

What snowblower will fit 944.600950 will the new ones fit.
ANSWER : That looks like a Sears mower so most likely yes it will but you would have to check with Sears to be sure.

Snowblower: fire from muffler
ANSWER : Try changing the spark plug. You may be having some misfiring going on here. Is your fuel to oil mixture right?