Bilt Tb425cs 26cc 4 – Cycle Curved – Shaft Gas Trimmer with…

I can’t locate the manual and can’t find the oil supply container that came with the unit.
Experienced gardeners share their insights in answering this question :
According to troybuilt, here’s their info.For Briggs & Stratton engines use an SAE30 oil above 40 degrees F (4 C) and below this temperature use 5W-30.For Tecumseh engines use an SAE30 oil above 32 degrees F (0 C) and below this temperature use 5W-30.For Kohler L-Head engines use an SAE30 oil above 32 degrees F (0 C) and below this temperature use 5W-30. For Kohler Overhead Valve engines use a 10W-30 above 0 degree F (-18 C), and below this temperature use a 5W-30.For Honda engines,10W-30 is recommended for general use, and above 55 degrees F (10 C) you can use an SAE 30.For MTD Brand engines, SAE 10W-30 is recommended for general, all-temperature use.K

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

4-Cycle SAE 10W-30 Engine Oil.
2-Cycle Synthetic Engine Oil – 3.2 oz – 490-000-Y066 | Troy-Bilt US.
This Honda 4-stroke (0.6 litre) universal SAE30 oil is suitable for all 4-stroke machines from Honda.
Use a 40:1 two-cycle oil mix ratio. One gallon of gasoline combined with 3.2 oz of two-cycle engine oil.
Your owner`s manual will tell you the exact grade required, but in almost all cases 10W30 is the right stuff for a four-stroke engines.
They can also use lubricants geared toward air-cooled engines, like those in chainsaws and weed eaters. Four-stroke engines can use automobile oils, and the standard SAE 30 is one of the best.
(60 ml) of SAE 30 oil into the filling hole.
Wahl clipper oil is specifically prepared to lubricate, protect and maintain clipper blades. Regular use of Clipper Oil will extend blade life by reducing friction, preventing rust and corrosion. It will also help maintain correct blade speed & improve run time of cordless clippers/trimmers.
Engines on most outdoor power equipment operate well with 5W30 Synthetic oil. For equipment operated in hot temperatures, Vanguard 15W50 Synthetic oil provides the best protection.
0.6 litres. This includes the lawnmowers, garden tractors, brushcutters, hedge trimmers, blowers, tillers, and snow blowers. Please note: Brand may vary.
Oil mix ratios explained

If your manufacturer recommends a 50:1 fuel/oil mix, it means you need 50 parts of gas to one part two-stroke oil. To mix one gallon of fuel at 50:1, add 2.6 ounces of two-stroke oil to one gallon of gas, as shown in the chart below.

For a 40:1 mixture, use 3.2 fluid ounces of oil per gallon of gas. For a 32:1 mixture, use 4 fluid ounces of oil per gallon of gas.
Although 4-stroke string trimmers have a reputation for lower emissions, better fuel efficiency, and high torque output, 2-stroke trimmers have their own advantages: Lighter weight. Easier maintenance. Easier storage.
With gas string trimmers, it`s important to check and add oil if the levels are low. Make sure to only add oil to the fill line. Overfilling the tank can damage the internal parts. You should also change the oil regularly.
When choosing lawn mower oil, use a high-quality detergent oil classified as “For Service SF, SG, SH, SJ” or higher. Do not use special additives. Synthetic oils are an acceptable oil at all temperatures. The use of synthetic oil does not alter required oil change intervals.
Our two-cycle snow throwers use a 50:1 ratio of gasoline to 2-cycle oil. A 50:1 ratio is a mix consisting of 2.5 ounces of 2-cycle oil with 1 gallon of gasoline.
Lawn mowers with 4-cycle engines have two tanks—one for gas and one for oil, each added separately. 30 weight oil, the same used in many automobiles, is the most common weight used in lawn mowers.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

My weed eater hedge trimmer runs for about 10 minutes and cuts off. It seems as though it is flooded, because it won’t start again until some time later. But it continues with the same pattern. I purchased a can of premixed gas/oil to make sure it was my mixture, to no avail. I have not replaced the spark plug yet, but I don’t think that has anything to do with it. Do you have any suggestions?
ANSWER : The plug can be the problem but also the air mix as well get the best plug you can

HOW TO PUT IN LINE WEED EATER FEATHER LITE PLUS FL26?
ANSWER : You can get a manual from the Weed Eater website.

I put to much oil in my weed eater, lot of blue smoke came out, then it stopped. if i pour some of the oil out and let it cool off will it be ok
ANSWER : Should be ok drain oil to correct level remove spark plug clean and dry plug,with plug out crank over to remove oil from cylender,make sure air filter did not get oil soaked if dry reinstall if wet replace. reinstall spark plug and start probably will smoke untill it burns off residual oil in muffler hope this helps

How to repair clutch HS45 Stihl – RTO Weed Eater Hedge Trimmer 20cc, Reconditioned
ANSWER : I’m not familiar with your machine, BUT… most of those centrifugal clutches ARE NOT repairable, and must be replaced when failed.

What size trimmer string does a husqvarna 223L weed eater use
ANSWER : This string trimmer will use .080 trimmer line

I have a Toro Electric weed eater and cannot get spool off to change.
ANSWER : Did you try using a flat screwdriver between the head and the bump knob?

Husqvarna vs Echo gas weed trimmers…needing your opinion.
ANSWER : They are very reliable brands stihl is a very good brand also.

Manual I have a Poulon Weed Eater Model FLSST25 (featherlite 17 inch 2 cycle gas powered straight shaft string trimmer and I need a manual for it……..what is the gas to oil ration?
ANSWER : Typically 32:1 to 40:1 for all these models. Use 35:1 and modern 2 cycle oil and you will be fine. 🙂