Bilt Bronco 208cc 4Cycle Gas Powered Rear Bolo Tine Tiller

Experienced gardeners share their insights in answering this question :
10w-30 should work.it should say what oil to use on it

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

For full replacement use SAE 140 or SAE 85W-140 gear oil with an API rating of GL-4 only. We have also found that 80W-90 oil with an API rating of GL-1 is acceptable for both partial and full replacement of tiller gear oils.
A 208cc OHV Troy-Bilt engine gives you plenty of power to turn over large amounts of soil. Just One Handâ„¢ operation allows the tiller to be guided with literally one hand thanks to a well-balanced and easy to control design.
Use a 40:1 two-cycle oil mix ratio. One gallon of gasoline combined with 3.2 oz of two-cycle engine oil.
Knowing when to change the oil in your walk-behind mower can help keep your engine running smoothly and help maintain its longevity. It`s suggested that you should replace the oil in your lawn mower every 50 hours of use or once a year, whichever occurs first.
Engines 208cc to 224cc with automotive type dipsticks have an oil capacity of . 6 quarts. Oil level is correct with the oil leaves marks at the full identifier.
SAE 5W-30 Engine Oil – 28 oz.
Honda 10W30 4-Cycle Engine Oil (1 Quart)
The engine takes 10W-30 motor oil. If you would like assistance with this, please contact us at (866) 591-8921 and reference case number 53696.
Yes. 5w30 and 10w30 are both 30 weight oils and the exact same thickness in your engine when it is at operating temperature. The 5w30 is better because it thickens less when cool or cold.
Honda 10W30 4-Cycle Engine Oil (1 Quart)
Yes. 5w30 and 10w30 are both 30 weight oils and the exact same thickness in your engine when it is at operating temperature. The 5w30 is better because it thickens less when cool or cold.
SAE 10W-30 Premium 4-Cycle Engine Oil.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

What motor oil does the troy bilt bronco use – Troy Bilt Bronco 208cc 4Cycle Gas Powered Rear Bolo Tine Tiller
ANSWER : 10w-30 should work.it should say what oil to use on it

Troy Built Tiller – How much oil does it take?
ANSWER : About a quart … but dont overfill. There is a dip stick on the engine.

Troy Bilt Rear tine tiller model 643 Bronco, won’t start,it ran out of gas, put in new gas and it started but wouldn’t stay running. Put in new spark plugs, cleaned filters, changed out gas,still won’t start
ANSWER : Did it run out of gas when you added gas it could be that the fuel line has plugged up with something from the bottom of the tank take the fuel line off and try blowing threw it and take a air hose and blow out the carb and carb cleaner

What oil gas ratio do i need – Troy Bilt Tb70ss Gas Trimmer
ANSWER : Hello rvan. the ratio is 50:1. the easiest way to achieve this is to buy a 2 gallon plastic gas can and a few of the 2 cycle engine oil bottles that are made especially to add to either one or two gallons of gas. Joe

Too hard to crank, the rope is wrond too tight.
ANSWER : You may want to check the oil level, some units can leak gas through the carb and into the cylinder. thus raising your oil level and making it hard to turn over.

Does a tiller with a briggs and straton engine need just gas or gas and oil mix
ANSWER : Just gas. It is a 4 cycle engine. I hope this helps.

What type of oil does it use? – Troy-Bilt 4-Cycle Curve Shaft Gas String Trimmer #41ADT41C966
ANSWER : I think all of these 4-stroke trimmers use SAE 30HD oil. I recommend synthetic. If you use synthetic, you can get away with using a multi-viscosity like 10W-30 if you can’t find straight SAE30 synthetic, but don’t use muti-viscosity conventional oil in these machines.

KEEPS BURNING UP FORWARD BELTS EVERY 4HRS OF RUN TIME AND I DO HAVE CORRECT SIZE
ANSWER : Driving wheles for belts is not in line