Pro Pp5020av 20-inch 50cc 2 Stroke Gas Powered Chain Saw…

Experienced gardeners share their insights in answering this question :
If it is cylinder to chassis mounting bolts then it is 110-140 IN-LB

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

Q: How do I mix gas and oil? A: Mix 3.2 ounces of Poulan 2-cycle air cooled engine oil to one gallon of fresh unleaded gasoline to obtain the recommended 40:1 fuel to oil ratio.
Poulan Pro 400E 18-Inch 4-HP Electric Chain Saw.
Proper Fuels

Poulan engines are designed to run best on 87-octane regular unleaded gasoline — avoid using diesel fuel and E85. Gasoline can be blended with 10 percent alcohol at the most, but do not store the saw with an alcohol-blended gasoline.

Poulan Pro Pre-Mixed 40:1/50:1, Fuel + Oil is specifically formulated with premium Poulan Pro oil and additives for easier starting and extended engine life. Designed for use in Poulan Pro, Poulan and Weed Eater 2-Stroke air cooled engines that require 40:1 fuel + oil mixture.
For a 50:1 ratio of gas to oil, use 2.6 fluid ounces of oil per gallon of gas. For a 40:1 mixture, use 3.2 fluid ounces of oil per gallon of gas.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Automatic shutdown computer trojen virus detected remove trojen virus please solution this virus
ANSWER : Hi,
Start your computer in safe mode…..

then download a program called Malwarebytes….

This program will fix you up…..

heatman101

What should gap be between ignition module and flywheel magnets on troybilt 575ss 4 cycle weed trimmer? It is a year 2006 model.
ANSWER : Pull the module back, tighten it up and align magnets on flywheel with module. Put a business car between them and loosen the module. It will move against card. Tighten the screws there. It’s set.

What type of oil does it use? – Troy-Bilt 4-Cycle Curve Shaft Gas String Trimmer #41ADT41C966
ANSWER : I think all of these 4-stroke trimmers use SAE 30HD oil. I recommend synthetic. If you use synthetic, you can get away with using a multi-viscosity like 10W-30 if you can’t find straight SAE30 synthetic, but don’t use muti-viscosity conventional oil in these machines.

Fuel lines split hoe to rerplace – Craftsman 4 Cycle Blower/Vac
ANSWER : Hi Rick…Hope this is what your looking forBud

Is the rubber on the drive wheel on the snapper mower fixed to the metal hub? The rubber wheel part of the drive is not securely attached to the metal frame and slips when the mower goes up hill. Should I replace the drive wheel?
ANSWER : Yes, it may have gotten excessive oil on it and swelled the rubber. Replace the drive wheel.

Where are the high and low adjustments on huskvarna 125b blower
ANSWER : The low is the one closest to the crankcase

What is the gas oil mixture for this product – Craftsman 4 Cycle Blower/Vac
ANSWER : You don’t mix oil and gas for a 4 cycle engine. Please do not add oil to the gas. The oil has it’s own tank for lubricating the engine. Use regular unlead gas in the fuel tank. Use 10w30 oil in the oil tank

My trimmer tb 4 cycle smoke like 18 wheeler what my be a wrong wit it
ANSWER : You may have too much oil in the crankcase. You also may have broken piston rings. I would check the oil first. It could also be a carb problem. You just have to look at each possibility and eliminate them. ..Lee