, No.455 Rancher, 20″ Gas – Powered Chainsaw
Experienced gardeners share their insights in answering this question :
Find an Operators and an IPL here:
Enter the 3 digit model number (no XPs, Es, just the numbers)
Serial number decode – for use with IPL
06 = year produced – 2006 (single digit before 2000)
15 = week produced – March
00198 = 198th unit Husky produced that week
Fuel ratio 50:1 = 1gal premium/2.6oz quality 2-cycle engine oil
Use a quality 2 cycle oil and mix it to the OIL supplier’s recommended ratio. Today I use Stihl 2 cycle oil mixed @ 50:1 in a Pioneer that I purchased new in 1980. There are no gouges or scratches on the piston or cylinder and I have no carbon build up on the piston top. The manual (on stone tablets) recommends 24:1. Over the years the mixture has leaned from 24:1 (Saw Recommendation) to 28:1 (Lawn boy mower recommendation) to 32:1 (Oil provider 2gal premium/8oz chainsaw 2-cycle engine oil – used for many years) and finally the last 5 (±) years 50:1 (1gal premium/2.6oz Stihl 2-cycle engine oil)
Any fuel containing ethanol is not good with chainsaws. Mix what you expect to use within a few weeks. Anything over 1.5 months old use up in a 4 cycle engine. HTH
How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
A fuel / oil ratio of 50:1 is recommended for all Husqvarna 2-stroke products.
All Husqvarna chainsaws use the ratio of 50:1, this means that for every gallon of gas you will use 2.6 oz. of 2 stroke engine oil.
Most modern chainsaws, string trimmers, leaf blowers and other small-engine two-stroke equipment recommend a 50:1 oil mix ratio, but some recommend 40:1 and older two-stroke equipment might even call for 32:1.
Husqvarna 450-PROMO 450 18-Inch 50.2cc Gas Chainsaw w/ 50:1 Pre-Mixed 2-Cycle Fuel + Oil, Quart, Case/6.
The correct mixing ratio for your Husqvarna is detailed in the warranty handbook. As a general guide, a fuel / oil ratio of 50:1 is recommended in Husqvarna products up to and including 75cc. In certain heavy use applications, models above 75cc may be run on a mix of 33:1.
For a 50:1 ratio of gas to oil, use 2.6 fluid ounces of oil per gallon of gas.
The fuel and oil mixture should always be 2% (50:1).
Most STIHL gasoline-powered equipment runs on a 50:1 mixture of gasoline and 2-cycle engine oil.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
What type of oil should be put in the 125L and what is the ratio?
1:50 two stroke oil1 part oil to 50 parts fuel
Do I need gas and oil mix – Poulan Super 250a Chainsaw Plate
I think Poulan uses a 40:1 ratio to one gallon of gas, however I have always used 50:1 the same as my sthl saws with no issue. I would rather have more oil mix that to little.
How do u mix the 50/1 ratio oil and gas mixture
Mix 2 1/2 oz of 2 cycle oil into 1 gal of gas
Do you mix gas and oil in this trimmer – Ryobi 30 Cubic Centimeter Curved Shaft Gas Trimmer
Yes. Verifythe ratio, either 40:1 or 50:1
What is the oil/gas ratio for a 2-cycle engine?
The ratio is 40:1 the greater being petrol
OIl gas mixture ratio?
One small bottle of oil from the auto parts store ( i don’t know the oz. size)to one gallon to one gallon of gasoline; mixed well
Gas to oil ratio? – Husqvarna , No.455 Rancher, 20" Gas – Powered Chainsaw
Hi,Gas to oil is 50 to 1 or about 2.8 oz. of two stroke oil to 1 gallon of prem. gasoline…
I need the gas mix oil ratio for the Poluan Pro 42…
40:1 gas to oil ratio.