Experienced gardeners share their insights in answering this question :
Not sure what make/model saw you have, most newer saws and other gas lawn tools are 50:1 ratio.
How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
What is the ratio for 2-stroke fuel mix? Most modern petrol garden machinery requires a 50:1 ratio mix of petrol to oil. This means for every 1 litre of petrol you must mix 20ml of oil.
For a mixing ratio of 1 : 50 you need 5 litres of petrol and 0.10 litres (100cm³) of STIHL two-stroke oil.
For a mixing ratio of 1 : 50 you need 5 litres of high-octane gas and 0.10 litres (100 ml) of STIHL two-stroke oil.
If your manufacturer recommends a 50:1 fuel/oil mix, it means you need 50 parts of gas to one part two-stroke oil. To mix one gallon of fuel at 50:1, add 2.6 ounces of two-stroke oil to one gallon of gas, as shown in the chart below.
What happens if the mixing ratios in a 2 stroke engine are incorrect? If you put too much oil, it can generate additional carbon build-up, making it difficult to start the engine, blow excessive smoke which is particularly bad for the environment and may (with time) cause the engine to stop operating correctly.
Ratios compare two numbers, usually by dividing them. If you are comparing one data point (A) to another data point (B), your formula would be A/B. This means you are dividing information A by information B. For example, if A is five and B is 10, your ratio will be 5/10.
The theoretical air–fuel ratio mixture for a gasoline fueled engine, for complete gasoline fuel combustion, the stoichiometric air–fuel ratio is about 14.7:1. In order to completely burn 1 kg of gasoline fuel, the combustion process needs 14.7 kg of air.
For a 32:1 mixture, use 4 fluid ounces of oil per gallon of gas.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
What is ment by 50 to 1 mix
50 to one is a ratio of fuel to lubricating oil. Typically 50 parts petrol/gasoline to one part two stroke oil.
Oil typically comes in a special plastic bottle that incoporates a measure. Simply squeeze the right ammount of oil into the little chamber and add to 5 litres of gas.
Do I need gas and oil mix – Poulan Super 250a Chainsaw Plate
I think Poulan uses a 40:1 ratio to one gallon of gas, however I have always used 50:1 the same as my sthl saws with no issue. I would rather have more oil mix that to little.
DCS520 PETROL/OIL RATIO
40 to one is a good mix
What oil ratio to petrol do I use?
40:1 is the recommended ratio for this type of engine.
If you cannot measure accurately you should tend towards more oil rather than less. That will protect your engine and the only downside will be a slightly smokier exhaust and possible oiling of the plug over time.
How to measure 2 stroke oil gas – Troy Bilt 31cc Quickshift Blowervac, Model No. Tb310qs
Depending on the mix of oil to gas you can purchase a small bottle to add to the gas. I believe it is 8oz. to a gal. of gas. This should give you approx. 50:1 ratio. Hope this helps.
Do you mix gas and oil in this trimmer – Ryobi 30 Cubic Centimeter Curved Shaft Gas Trimmer
Yes. Verifythe ratio, either 40:1 or 50:1
I need the gas mix oil ratio for the Poluan Pro 42…
40:1 gas to oil ratio.
What is the oil/gas mix ratio? – Husqvarna , No.455 Rancher, 20" Gas – Powered Chainsaw
50:1 ratio 2.6 fl oz of 2 stroke oil to 1 gal of fuel