Ariens
Experienced gardeners share their insights in answering this question :
The current Tecumseh part number is 740009B which should cross to a Champion RJ17LM.
How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
The model number and serial number information can be found by standing behind the snow blower and leaning down. Look between the two wheels and below the handles.
ARIENS Deluxe 921049 Snow Blower, Gasoline, 306 cc Engine Displacement, 4-Cycle Ariens AX Engine, 2-Stage.
Ariens snow blowers are powered by either a Briggs and Stratton Polar Force engine, or Ariens new AX series engines.
1980s Ariens ST724 and ST824
Although these are often mistaken for contemporary machines, they were built starting the very next year, 1980.
Designed and manufactured in Brillion, Wisconsin and Oxford in the United Kingdom, Ariens outdoor power equipment has been serving commercial operators and homeowners for over 80 years.
Maximum performance is driven by the 254cc engine that also offers up to 8.5 HP and a friction disc transmission, allowing you to change speeds in rough conditions.
To keep your snowblower running at its best, experts say you should change out your spark plugs at least once per season or after every 100 running hours. You`ll know to check your spark plugs when your snowblower is slow to start, or when the engine runs differently than usual.
Replacing worn spark plugs can greatly improve your engine`s performance and efficiency, and it can be done at home with basic hand tools. Recommended spark plug replacement intervals can range from 30,000 miles to every 100,000 miles, and they vary widely by car manufacturer and spark plug metal types and design.
ARIENS LAWN & GARDEN SERIAL NUMBER LOCATIONS
MODEL AND SERIAL NUMBER LABELS FOR THE ZERO-TURN PRODUCT LINE ARE LOCATED ON THE MAIN FRAME OF THE UNIT.
How Do I Locate the Engine Model Number on My Snow Blower? The engine model number is usually a number stamped into metal directly on your engine. It may be stamped onto the left side of the overhead valve cover, the metal shield below the muffler, or the cylinder shield on the side of the engine.
ARIENS LAWN & GARDEN SERIAL NUMBER LOCATIONS
MODEL AND SERIAL NUMBER LABELS FOR THE ZERO-TURN PRODUCT LINE ARE LOCATED ON THE MAIN FRAME OF THE UNIT.
Where to Locate Your Model. When standing behind the unit, the product identification label can be found in the center or right-hand side of the base of the unit where the handle bars attach.
Model & Serial Number
The model and serial number of an Ariens riding mower can be located on the side of the mower frame, on the side of the dash support, or under the seat.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
Snow blower threw oil everywhere and will not move. Engine starts but does not move forward.
ANSWER : The gearbox for the drive has sheared a tooth off the gear to make it leak and not propel the wheels. it has cut into the seal making it leak
Read Full Q/A … : Ariens
Auger does not engage on Ariens Model 924121 sno- Thro
ANSWER : First check shear pins in the auger ( try to turn big auger by hand, engine off)
then if they are good then try to turn impeller by hand, engine off
youll need to turn it a few times before the larger ones turn, but thats what you want
if they dont turn then you have sheared the gear box gears
be sure belts are good tooo
then if they are good then try to turn impeller by hand, engine off
youll need to turn it a few times before the larger ones turn, but thats what you want
if they dont turn then you have sheared the gear box gears
be sure belts are good tooo
Read Full Q/A … : Ariens
MTD snow blower model#31AH5WTG799 blades stoped turning
ANSWER : Look for a broken shear pin. It is usually a bolt that goes through the blade shaft and will break with an overload.
Read Full Q/A … : Ariens
How do you put it in neutral
ANSWER : Does it have steering control triggers to turn it left or right…if so hold both at the same time with engine off and see if you can push it..Let me know if that works. Or let me know what kind of controls you have
Read Full Q/A … : Ariens
Electric Maztang mt 968 auger wont run – Yard Machines 28" Two-Stage Snowthrower
ANSWER : The motor runs but the auger does not , if so the bolt snapped in half from hitting something that you should have not hit , this is a normal thing so as to not blow up the engine , it is a safety feature in all snow blowers , just get the right bolt or make one grind it down to where it will break easy but will work the auger , they sell them on ebay for a couple bucks but I make mine
Read Full Q/A … : Ariens
How much oil does the snow blower hold
ANSWER : 725 ml
Read Full Q/A … : Ariens
Snow blower gets bogged down in snow.
ANSWER : It sounds like your engine is running lean, see if you can adjust the high throttle mixture on the carburetor (if possible at all). If there is no adjustment possible, it may be the carb is clogged and needs some service. Try cleaning it or find a new replacement carb for it.
Read Full Q/A … : Ariens
Will not start – Yard Machines 24" 208cc Two Stage Snow Thrower
ANSWER : If there is an adjusting screw on the carb turn it out a little bit at a time and see if that works before you do anything else. If that don’t work put the screw back where you started.
If that doesn’t work take the plug out and install a new one and while the plug is out put a table spoon of gas in the spark plug hole and reinstall the plug and put the plug wire back on. If the engine starts but stalls after the little bit of gas is used up. Take the bowl off the carb and clean it out as well as clean the fuel jet that is in the bolt that holds the bowl on. Put back together and see if that works. It is quite often dirty gas that is the problem. Especially if its been sitting. Oh yes put fresh gas in it as well.
If that doesn’t work take the plug out and install a new one and while the plug is out put a table spoon of gas in the spark plug hole and reinstall the plug and put the plug wire back on. If the engine starts but stalls after the little bit of gas is used up. Take the bowl off the carb and clean it out as well as clean the fuel jet that is in the bolt that holds the bowl on. Put back together and see if that works. It is quite often dirty gas that is the problem. Especially if its been sitting. Oh yes put fresh gas in it as well.
Read Full Q/A … : Ariens
