Poulan/Weed Eater No. Te475 952711797 17″ Le Gas…

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

Before operation, gasoline must be mixed with a good quality synthetic 2-cycle air-cooled engine oil designed to be mixed at a ratio of 40:1. Poulan/WEED EATER brand synthetic oil is recommended. Mix gasoline and oil at a ratio of 40:1.
Designed for use in Poulan Pro, Poulan and Weed Eater 2-Stroke air cooled engines that require 40:1 fuel + oil mixture. This ethanol free, high octane fuel stays fresh for years solving long term storage needs.
Q: How do I mix gas and oil? A: Mix 3.2 ounces of Poulan 2-cycle air cooled engine oil to one gallon of fresh unleaded gasoline to obtain the recommended 40:1 fuel to oil ratio. Over a period of time oil will separate from gasoline.
A 40:1 ratio is recommended for this particular model. To obtain the correct mixture, pour 3.2 ounces (95 ml) of 2-cycle synthetic oil into one gallon (4 liters) of fresh unleaded gasoline.
Use a 32:1 gasoline to oil ratio. One gallon of gasoline combined with 4 oz of two-cycle engine oil.
Typical fuel and oil mixture ratios are 50-to-1 (gasoline to oil) and 40-to-1. Four-cycle trimmers don`t require you to mix the gas and oil. Simply fill the fuel tank with gas, and fill the oil tank with four-cycle oil.
For a 50:1 ratio of gas to oil, use 2.6 fluid ounces of oil per gallon of gas. For a 40:1 mixture, use 3.2 fluid ounces of oil per gallon of gas. For a 32:1 mixture, use 4 fluid ounces of oil per gallon of gas.
Use a 40:1 two-cycle oil mix ratio. One gallon of gasoline combined with 3.2 oz of two-cycle engine oil.
Poulan/WEED EATER brand synthetic oil is recommended. Mix gasoline and oil at a ratio of 40:1. A 40:1 ratio is obtained by mixing 3.2 ounces (95 ml) of oil with 1 gallon (4 liters) of unleaded gasoline.
The trimmers use a blend of gasoline and two-cycle engine lubricant, held in an 18-ounce fuel tank.
Fuel mixing – The engine requires a mix of petrol and engine oil. Simply mix a Stihl 50:1 two-stroke engine oil with unleaded (95 octane) petrol.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Is it straight gas or mixed? – Poulan Pro 14" Gas Chainsaw 33CC P3314
ANSWER : It uses a gas/oil mix. 40:1Hope this helps.

I need the gas mix oil ratio for the Poluan Pro 42…
ANSWER : 40:1 gas to oil ratio.

Do I need gas and oil mix – Poulan Super 250a Chainsaw Plate
ANSWER : I think Poulan uses a 40:1 ratio to one gallon of gas, however I have always used 50:1 the same as my sthl saws with no issue. I would rather have more oil mix that to little.

What ratio of oil and gas do I mix together? How do you start it? I bought the weed eater used.
ANSWER : If you bought it used, you can bet that they didn’t run it out of fuel before they stored it, so the gas evapoated out of the carb and all that was left was oil, so mix your fuel 8 to one eight parts gas and one part oil, you’ll have to hit the primer botton several times.

WHAT IS THE GAS AND OIL MIXTURE FOR THE TRIMMER
ANSWER : You need to read the operation manual that came with your product to get the correct gas to oil ratio.My pouland P1500 is 40 to 1 that is 40 parts of gas to one part of oil.

Do you mix gas and oil in this trimmer – Ryobi 30 Cubic Centimeter Curved Shaft Gas Trimmer
ANSWER : Yes. Verifythe ratio, either 40:1 or 50:1

What kind of oil do i MIX WITH THE FUEL – Poulan P3416 16Inch 34cc 2Cycle Gas Powered Chain Saw
ANSWER : 2 STROKE OIL.THE ONE 2 STROKE MOTORCYCLE USE.If you need more help post back!
Thumbs and testimonial are welcome!

How do u mix the 50/1 ratio oil and gas mixture
ANSWER : Mix 2 1/2 oz of 2 cycle oil into 1 gal of gas