**Homelite**

## How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

**50:1**gas-to-oil ratio. Use the whole bottle for up to 6 gallons of gas, or squeeze the bottle and let the top fill to a desired level.

If your manufacturer recommends a 50:1 fuel/oil mix, it means you need **50 parts of gas to one part two-stroke oil**. To mix one gallon of fuel at 50:1, add 2.6 ounces of two-stroke oil to one gallon of gas, as shown in the chart below.

**The ratio of produced gas to produced oil**, commonly abbreviated GOR. The ratio of the volume of gas that comes out of solution to the volume of oil at standard conditions.

**50:1 or 40:1**2 stroke oil to gas ratio.

**One gallon of gasoline combined with 4 oz of two-cycle engine oil**.

**for every 1 litre of petrol you must mix 20ml of oil**.

**For a 50:1 ratio of gas to oil, use 2.6 fluid ounces of oil per gallon of gas.**

**For a 40:1 mixture, use 3.2 fluid ounces of oil per gallon of gas**.

**favorable to solution gas drive**. Oil recovery increased with the solution gas ratio. The higher the amount of solution gas dissolving in oil is, the better the stability of foamy oil is.

**50:1**mix of unleaded automobile gasoline and two-cycle engine oil. That is equivalent to 2.6 fluid ounces (80 ml.) of oil to one gallon of gasoline or 4 tsp. (20 ml.)

**3.2 fluid ounces of oil per gallon of gas**.

**50:1**mix of unleaded automobile gasoline and two-cycle engine oil. That is equivalent to 2.6 fluid ounces (80 ml.) of oil to one gallon of gasoline or 4 tsp. (20 ml.)

_{i}, which is defined as

**the amount of a constituent n**: The mole ratio is also called amount ratio.

_{i}divided by the total amount of all other constituents in a mixture## Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

**ANSWER :**I think Poulan uses a 40:1 ratio to one gallon of gas, however I have always used 50:1 the same as my sthl saws with no issue. I would rather have more oil mix that to little.

**ANSWER :**Hi. 50 to 1.

**ANSWER :**Unless you know better, I would use 40:1. That will give you more oil than needed if it is 50:1 but wont hurt the engine. Do some more checking to get the actual ratio…Lee

**ANSWER :**The proper mix for this blower is 40:1

**ANSWER :**Yes. Verifythe ratio, either 40:1 or 50:1

**ANSWER :**I usually mix at 50:1 useing klotz two stroke oil,or 44:1,klotz is high performance zynthetic oil,also has nice sweet smell when running,keeps the neighbors from complaints on bad smell.

**ANSWER :**40:1 gas to oil ratio.

**ANSWER :**50:1 ratio, and any type of two stroke oil will do