Experienced gardeners share their insights in answering this question :
It depends on the make but sthil now have a oil that is suitable for all mix ratios up to 50:1
you can start at 20:1 and run the engine
if the exhaust is very smoky , change it to 40:1 and again check the smoke
50: 1 is thinnest oil ration for all engines
The ratio is correct when you can just see smoke when at revs
you can always google and type in— oil/fuel ratio for ( make ) chainsaw model csp3314—or possible look at the filler cap as the ratio is commonly printed in the plastic cap
How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
Most modern chainsaws, string trimmers, leaf blowers and other small-engine two-stroke equipment recommend a 50:1 oil mix ratio, but some recommend 40:1 and older two-stroke equipment might even call for 32:1.
Use a 40:1 two-cycle oil mix ratio. One gallon of gasoline combined with 3.2 oz of two-cycle engine oil. Unsure of the age of your equipment?
For a mixing ratio of 1 : 50 you need 5 litres of petrol and 0.10 litres (100cm³) of STIHL two-stroke oil.
You can do that but I wouldn`t 40 to 1 means 40 parts of gas one part of oil. 50 to1 means 50 parts of gas to 1 part of oil. So the 40 to 1 mixture is more oily and provides better lubrication for your piston rings.
Modern gasoline chainsaws run at 50:1 mixture, 50 parts gasoline to 1 part oil. Older chainsaws can require 16:1 mixtures or 32:1 (most common). Two-stroke engines are much more efficient now, as well as having cleaner combustion. At most automotive stores, pre-mix fuel can be bought in 50:1 and 40:1 mixtures.
For a mixing ratio of 50:1 you need 5 litres of petrol and 0.10 litres of STIHL two-stroke oil.
100:1 – Mix 50ml of oil per 5ltrs of fuel
Recommended by Yamaha and Suzuki for most of their small two stroke engines up to about 30hp, this ratio requires the least amount of TCW3 two stroke oil. The result of using this ratio (less oil) is reduced spark plug fouling and less smoke.
1:25 = 1 part oil + 25 parts petrol, or 40 ml oil per litre of petrol when using other brands of oil. Any two-stroke engine oil you use in your petrol gardening tool must have the TC classification.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
Fuel oil mix,16 or 32
32:1 should be it. It is better to try this and if it runs VERY smokey and fouls the plug it may be 40:1.
I put new fuel in it and now it will start but not stay running when i put load on it. Maybe i mixed the fuel wrong. what now?
CHECK FUEL LINES FOR LEAK, CLEAN AIR FILTER
Need a chain for 14in electric poulan chain saw the normal 14 in chain does not list the electric saw as one it will fit
The number of drive links, pitch and gauge of the chain need to be determined to answer your question. If you take your saw or just the chain to a local chain saw outlet a new chain can be fabricated in a very few minutes. This will save shipping and handling fees as well. While there get the numbers mentioned above. Once you have these you can likely find a low kickback chain in a local home center the next time the chain needs replacement.
The FAQs here can likely answer all your questions.
If you have more questions or need additional help please reply below and I will get back to you. HTH & Good Luck.
Thank You for using FixYa.
IS TRUFUEL 40:1 FUEL+OIL MIX ACCEPTABLE TO USE IN MY ELECTRIC CHAINSAW
What kind of joke is this?????
Fuel mix oil to fuel ratio
The oil ratio is 50:1
Here is the website: http://homeguides.sfgate.com/oil-fuel-mixture-farm-tough-husqvarna-chainsaw-83933.html What Is the Oil Fuel Mixture for Farm Tough Husqvarna Chainsaw
Chain keeps falling off – Poulan 18" Chain Saw Replbar (small Saws)
Your chain is too loose. If you’re using an old chain, you might need to have a link taken out of it. You can find replacement chains for your saw at Hyperparts.com. Use the application lookup link at the top of the page with your model # to make sure you order the right chain.
Saw starts runs good for a while then quits – Poulan Pro Chain Saw 46cc 20"
Try this out. I have the same issue. When its acts like it wants to quit, crack open the fuel cap. The cap has a small breather in it and if that gets clogged it will starve fuel.
What is the fuel & oil mix for a chain saw – Husqvarna Chain Saw 20" Bar
What is the precent of oil ( litter ) to mixed with one litter of [email protected]