Garden

Experienced gardeners share their insights in answering this question :
Hi there,http://lawnandgarden.manualsonline.com/support/poulan/chainsaw/user-or-service-manual-1285532If this is an older saw here is a site that said the oil mix is on the tag.I couldn’t find your exact model.    I always add this for your information. If this is not the solution that you are looking for please re post because when we pick a question to answer FixYa takes it out of the questions. Thank you for choosing FixYa.com.  

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

Most modern chainsaws, string trimmers, leaf blowers and other small-engine two-stroke equipment recommend a 50:1 oil mix ratio, but some recommend 40:1 and older two-stroke equipment might even call for 32:1.
The Poulan Pro 952030203 Bar and Chain Oil is Formulated for use by the logging industry, this oil helps prevent rust, resists high-temperatures, flows freely at low temperatures and has the ability to resist the extreme pressures bars and chains – bottle size is 1 Quart.
For a mixing ratio of 1 : 50 you need 5 litres of high-octane gas and 0.10 litres (100 ml) of STIHL two-stroke oil.
Modern gasoline chainsaws run at 50:1 mixture, 50 parts gasoline to 1 part oil. Older chainsaws can require 16:1 mixtures or 32:1 (most common). Two-stroke engines are much more efficient now, as well as having cleaner combustion. At most automotive stores, pre-mix fuel can be bought in 50:1 and 40:1 mixtures.
Q: How do I mix gas and oil? A: Mix 3.2 ounces of Poulan 2-cycle air cooled engine oil to one gallon of fresh unleaded gasoline to obtain the recommended 40:1 fuel to oil ratio. Over a period of time oil will separate from gasoline.
For a 50:1 ratio of gas to oil, use 2.6 fluid ounces of oil per gallon of gas. For a 40:1 mixture, use 3.2 fluid ounces of oil per gallon of gas.
40 to 1 ratio

This equals 25mls of two stroke oil to 1 litre of petrol. It is pretty easy to calculate, you just multiply the litre amount by 25.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Gas to oil mixture for a RY 26540 – Ryobi 30 Cubic Centimeter Curved Shaft Gas Trimmer
ANSWER : 50:1 don’t use outboard motor mix

Read Full Q/A … : Garden

What kind of oil in the oil tank and how much for the remington electric pole saw ?
ANSWER : Bar & chain oil is the best. You can use regular or synthetic. Some say you can use atf (auto transmission fluid) or sae30 oil. I use bar & chain oil.

Read Full Q/A … : Garden

What is the gas oil ratio – Poulan Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin
ANSWER : Half and half

Read Full Q/A … : Garden

How much oil to gas mixture for ryobi 40 cc chain saw
ANSWER : Requires a mix of 50-1

Read Full Q/A … : Garden

Is 10-30w car oil ??? Okay to use as the Oil on the Chainsaw Bar of a Remington Pole Saw Model 106890-02?
ANSWER : Car engine oil has not got a non fling addative so will just spray off the end of the bar and not lubricate the chain where it does most of its cutting, on the underside of the bar.

Read Full Q/A … : Garden

What type of GAS and OIL need for the chain saw?
ANSWER : Hi gjoun…
You will need “Chain and Bar” oil to lube the chain and bar. Special oil made just to lubricate the chain and bar as the chain is running.
For the engine you can use the low grade of gasoline…and 2 cycle oil.
Fuel mix…50 to 1 = 1pint of 2 cycle oil to 6 gallons of gasoline.
Please take time to rate me

Read Full Q/A … : Garden

Ratio for gas mixture – Husqvarna Craftsman 36cc, 16 In. Gas Chain Saw
ANSWER : The ratio is 40:1. Use good quality 2 stroke oil, preferably Husqvarna, not the type you can get at car service stations as the cheaper oil will cause the engine to wear more quickly.

Read Full Q/A … : Garden

Every chain saw uses as fuel a mixture of oil and gasoline. What is the correct mixture for a textron gasoline powered saw?
ANSWER : 25:1 to 32:1 Start at 25:1. If it smokes too much or fouls a plug, go to 32:1 using a good grade 2-cycle oil.

Read Full Q/A … : Garden