r diesel engine and the gear drive transmission
This is not a lawn garden tractor?
It is a full size 45 hp 4 cylinder diesel
Experienced gardeners share their insights in answering this question :
How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
Yanmar Tractor Transmission & Hydraulic Fluid TF500A
The special formula TF500A fluid is highly recommended for all Yanmar tractors. This Genuine transmission fluid specifically provides optimum gear protection, enhanced hydraulic lift capacity and smooth, effective and quiet braking.
Hy-Tran® Ultra, a special hydraulic fluid that offers improved performance and protection in high temperatures and conditions, is the product that Cub Cadet advises using. Hy-Tran® Ultra can be used in place of the previously advised Hy-Tran® Plus fluid and is compatible with all Cub Cadet machinery.
Yanmar engine oil 15W-40 is a proven-performance diesel engine oil, formulated to provide stable performance. Detergency and acid control help prevent engine and bearing corrosion, reducing maintenance downtime.
Cub Cadet 32-oz 4-Cycle Engines 10W-30 Conventional Engine Oil.
Choosing the right hydraulic fluid is crucial to guarantee the best performance and efficiency of the system. Each fluid has its specific characteristics in terms of viscosity, suitable operating conditions, anti-wear properties, etc.
You should always use a trans-hydraulic fluid that says on the label that it meets the specifications of your tractor`s maker. There are also universal trans-hydraulic fluids that meet the specifications of most tractor manufacturers.
Interestingly, hydraulic fluids for tractors are NOT the same as other hydraulic oils. Tractor hydraulic fluids are specially designed to fulfill multiple functions such as transmissions and differentials, final drives, hydraulics, power steering, wet brakes, and more.
Recommended for all hydrostatic drive systems where the manufacturer recommends SAE 20W-50 fluid.
Yanmar SAE-30 Genuine Transmission Oil 1L.
Yanmar is a Japanese diesel engine manufacturer that was founded back in 1912. They manufacture and sell engines used in a wide range of applications including construction and agricultural plant. Yanmar is known as John Deere in the US market.
Petroleum-based fluids: Petroleum-based oils,also called mineral oils, are the most widely used fluids in hydraulic systems.
Powermore® engines are a premium small block engine with advantages that in many cases are better than competitive engine models. Some of the premium features include: Overhead Valves (OHV) Cast iron cylinder sleeve.
Hydraulic equipment used indoors under normal service conditions generally use a conventional antiwear hydraulic oil with the appropriate viscosity. The most commonly used viscosities are ISO 32, 46, or 68, since these are able to lubricate and protect the system under the normal range of operating temperatures.
Mineral oil-based: Mineral oil-based hydraulic fluids are the most common due to their relatively low cost and good lubrication properties.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
Cub cadet 1050 changed oil now its wants me to change oil again and it smokes really bad now to much oil or too little
The 1050 holds 57.5 oz slightly less than 2 qts 64 oz. the filler stick is marked. shiould be over the add mark not over the full mark
Where is the fuse – Cub Cadet LTX 1042 KW 42" 18HP Kawasaki Lawn Tractor – 13WG93AS010
Behind the dash panel at top of dash there is only one fuse
How do I drain the oil when it comes equipped with a hose? Unscrew the end?
Where hose is connected is a valve in the fitting. Turn the small nut counterclockwise to open.
Cub Cadet zero turn. Cannot get the blades to turn when PTO switch is pulled. Belts are fine and attached. Please help.
I had the same problem. there was a short in the relay just before the wire gets to to back pulley assembly.
Cub cadet lt1042 will not back-up a small hill
Change your hydrstatic fluid and filter
PTO will not engage on my 0 turn Cub Cadet RZT 50. What should I check and how do I check it?
See if the switch is getting power to it and if it is see if the clutch is getting power. it needs 12 volts in order to engage.
Oil light keeps flashing, Check Oil but the oil gage says that it is full.
The flashing comes on just before the 50 hour mark, then again every 50 hours. It has nothing to do with the actual oil in the engine. It is a reminder only to change the oil. It will then reset after the 50 hour intervals. You dont need to do anything to shut it off.
Hopr this helps
Transmission oil ? for cub cadet tractor
Hi, Cissy, Every Cub Cadet is different, and they keep their manuals to themselves. With your exact model and serial number, you can go to their website and view the manual for your model which should have the type of oil you need. Their website is www.cubcadet.com and go to service. If you have trouble, let me know, but I will need the model and serial. Good Luck, this should Fixya!