Garden

Need the setting for a True temper #30 broadcast spreader for Scott #1 of a 4 step program. Also the setting for Scott all season grubex grub control. Can’t find the info anywhere and Scott can’t provide.

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

With many different spreaders on the market, it can be difficult to know what setting to use – so we`ve done the hard work for you! For overseeding an existing lawn, we recommend a sowing rate of 35g per m2, and for sowing a new lawn from scratch we recommend a sowing rate of 50g per m2.
If you are using a drop spreader, such as Scott`s Classic Drop Spreader, and using a Yard Mastery granular fertilizer, you will want to set your spreader at a 7.
What setting do I use on a rotary spreader to apply Ferti-Lome Centipede Lawn Fertilizer 15-0-15? You would apply the Ferti-Lome Centipede Lawn Fertilizer 15-0-15 at a rate of 4 lbs per 1,000 square feet.
The first number is the amount of nitrogen (N), the second number is the amount of phosphate (P2O5) and the third number is the amount of potash (K2O). These three numbers represent the primary nutrients (nitrogen(N) – phosphorus(P) – potassium(K)). This label, known as the fertilizer grade, is a national standard.
RECOMMENDED SPREADER SETTINGS:

Scotts Broadcast/Rotary Spreaders – Set to 3 for reseeding, set to 4 1/2* for New Lawn or Bare Spot Repair. Scotts Drop Spreaders – Set to 5 for reseeding, set to 7 for New Lawn or Bare Spot Repair.

A spreader setting is the rate in which you apply product to your lawn. Each Jonathan Green product has recommended rates of application and coverage based on bag size. The application rate is defined as the amount of material applied per unit area of land.
Spreading height

The spreader should be 75cm over the crop. This should be adjusted as the growing season moves on. For example, the spreader should be 75cm over a crop of grass or an emerging crop of spring barley; it should also be 75cm above a wheat crop at GS30.

The recommended spreader setting for Pennington All Purpose Fertilizer 19-19-19 is based upon the amount of nitrogen in the bag. The bag will cover 9500 sq. ft. so you will need approximately 9.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

I want to apply scotts grub ex. With an earthway spreader, what setting should i use?
ANSWER : You have scot’s i want bayers grub killer

Read Full Q/A … : Garden

I have an older scotts drop spreader, called a precision flow control model and do not know what settings to use with the Scotts turf builder I have purchased.
ANSWER : Hi,
The best way is to just place a small amount… like 5 lb in the hopper…start with it barely open and see how far you get,,, then compute from there what you need…
The settings they give you are guesamates at best and are often set to place too much… why not??? they are selling you a product!!

heatman101

Read Full Q/A … : Garden

What i s setting on scotts lawn pro spreader to spread lesco momentum force weed andfeed 21-0-11
ANSWER : You can normally gauge it from the size of the granuals i think it is between 6 and 7

Read Full Q/A … : Garden

I have a hand held scotts spreader and i don’t know which setting to put it on.
ANSWER : The setting should be stated on the bag of whatever you are spreading. Use that setting…Good luck…Lee

Read Full Q/A … : Garden

What is spreader setting for scotts southern turf builder on my earthway ev-n.
ANSWER : 3/4 of all the way be sure to shut off before turning as u can clump fert in grass

Read Full Q/A … : Garden

What setting should i use with my hand held scotts spreader for huma green?
ANSWER : What setting should i use
setting links below.
https://www.gemplers.com/docs/IS/61054CHART.pdf
Scotts Spreader Settings Helper Tools Scotts

Read Full Q/A … : Garden

My setting range from 22 to 32… the lime says Scotts should be set on 4&1/2 to 6.
ANSWER : Use Scotts settings for Scotts products.

Read Full Q/A … : Garden

Calibration What do the numbers mean
ANSWER : They are the settings u used depending on what feed u are using
aon the back of any feed they indicat the number u need

Read Full Q/A … : Garden