Bilt 175HP Manual 42″ Riding Mower

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

A common cause of belt breakage is excessive grass clippings on the deck. Grass clippings can work their way under pulleys and deck covers, causing series problems. Make sure to clean off your deck after every mower use and follow manufacturer recommendations.
If a belt is not tensioned properly, it will ride too loose or too tight on the pulley. A belt that`s too loose on a pulley will cause slippage, which leads to heat build up from friction. This heat will damage your rubber belts and cause the belts to crack and break.
There is no specific time length that mower belts need to be replaced. Some belts may last longer than others due to different operating conditions. One thing is for certain though, the more the mower is used, the sooner you will need to consider replacing the mower belt.
Improper use and handling, inadequate tension, using the wrong grit, and low-quality or worn-out sanding belts can all contribute to premature belt breakage. Correct usage, applying the right grit for the application, and investing in a quality product can all reduce the risk of sanding belt damage.
A perfectly tight mower belt can rotate without slipping off but not cause the engine to over-exert and overheat. If the belt does not slip off while working and is not producing unfavorable sounds that indicate wearing off of the belt, then that is the perfect tightness for it.
Best riding mower overall

The Troy-Bilt Super Bronco XP riding mower is an excellent choice for a variety of lawns. It`s built with a 24HP Kohler engine and a 54-inch cutting deck to let you handle inclines and rough terrain or haul tools, mulch, and potting soil around your property.

If too much hair, string, or lint is caught in the brushroll, the brushroll can get stuck. If the brushroll is stuck, it will put too much strain on the belt and may cause the belt to break. Remove the brushroll and clean out any debris from the bearings. After replacing the brushroll, make sure that it turns freely.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

TROY BUILT RIDING MOWER MODEL13AX60KH011 – Troy Bilt 175HP Manual 42" Riding Mower
ANSWER : OK question

NEED A DIAGRAM OF HOW TO ROUTE A BELT ON A TROY BILT RIDING LAWN MOWER (DECK BELT) NOT DRIVE BELT. THANKS
ANSWER : Type in your model number to your search engine. find your model and the diagrams will be there.
hope this helps.

Gas flooding air intake – Troy Bilt 175HP Manual 42" Riding Mower
ANSWER : Float is stuckor there is something between float needle and seatmine had dried out gas line pcs caught in itchanged the line took bottom off carb cleaned it out (carb spray)put it back together no more over flow

Makes noise in reverse in rear end section – Troy Bilt 175HP Manual 42" Riding Mower
ANSWER : Make sure that the linkage is allowing it to go all the way into gear

When mower lever is engaged the motor dies – Troy Bilt 175HP Manual 42" Riding Mower
ANSWER : There is a safety switch that may be out of adjustment when you engage the deck

Show me where the choke is and how to unstick it.
ANSWER : Its just under the air cleaner in the top of carburator

Law mower won’t turn over alls you hear is the starter
ANSWER : Your valves need adjusted. Not reasing compression.

Steering will not turn – Troy Bilt 175HP Manual 42" Riding Mower
ANSWER : Look for a broken t shaped part where the shaft and gear meet