Garden
Brand new battery placed in as well as a a new PTO cable. There does not appear to be any fuses anywhere, The mower just makes one click when trying to start it. I was thinking possibly bad starter or ignition coil. Not sure if it even has them, but there is a rather large round cylinder which one of the assembly of wires leads to from the key (ignition) which is attached to the right side of the engine. When I touched it where the wire is bolted on after trying to start the mower, it felt warm. Not sure what else to check. The seat safety switch is fused in the contact position. Is there some
Experienced gardeners share their insights in answering this question :
Use jumper cables and jump t direct to the starter and see if it cranks over that will test the starter if it cranks look at the safety switches and battery cables
How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
Best riding mower overall
The Troy-Bilt Super Bronco XP riding mower is an excellent choice for a variety of lawns. It`s built with a 24HP Kohler engine and a 54-inch cutting deck to let you handle inclines and rough terrain or haul tools, mulch, and potting soil around your property.
If the engine will not crank, you likely have a problem with… Discharged / defective battery or faulty electrical connections. To address these issues, check the battery and charging system for problems. Faulty parts: potentially the safety interlocks, starter motor switch (open circuit) or solenoid.
Your Mower Won`t Start:
Other possible causes include: Loose, Dirty or Disconnected Spark Plug in Your Lawn Mower: Check it out, clean off debris, re-connect and tighten. Dirty Air Filter: Clean or replace. Fuel Not Reaching the Engine: Tap the side of the carburetor to help the flow of gas.
Most riding mowers rely on lead acid batteries, although some use lithium-ion or lithium iron phosphate batteries.
Troy-Bilt® is headquartered in Valley City, Ohio, and our reliable equipment includes select products that are designed, built and tested right here in the U.S. – from Ohio and Mississippi to Tennessee and Arizona.
Troy-Bilt TB130 160-cc 21-in Push Gas Lawn Mower with Honda Engine in the Gas Push Lawn Mowers department at Lowes.com.
If your lawn mower turns over (or cranks) but won`t start, it could result from an issue with one of the components of the fuel system or bad gas. You should inspect the fuel filter for clogs or damage and check the fuel line for kinks, cracks, or leaks.
Check/clean/tighten all connections on battery/solenoid/starter/Ignition switch and neg(-) cable to frame or motor. Check to ensure all safety features are working properly and not engaged. Check for an inline fuse, bypass solenoid to see if engine cranks if it does replace solenoid, if no crank replace starter.
Touch the metal shaft of a screwdriver to both of the large terminals at the same time. If the engine turns over and starts, the solenoid is bad and should be replaced. If the starter motor does not run, the motor itself is probably defective.
Check/clean/tighten all connections on battery/solenoid/starter/Ignition switch and neg(-) cable to frame or motor. Check to ensure all safety features are working properly and not engaged. Check for an inline fuse, bypass solenoid to see if engine cranks if it does replace solenoid, if no crank replace starter.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
I RENTED A TROYBUILT PONY TILLER WHILE WAITING ON MY NEW ONE TO BE DELIVERED AND WHEN I START IT AND ADJUST THE TINE DEPTH AND INGAGE THE TINES TO TILL IT PULLS YOU SO HARD YOU CAN NOT HOLD IT, WHAT AM I DOING WRONG? THANKS DONNA
ANSWER : You are trying to dig too deep, too fast. Set the tines at a shallower depth and make multiple passes, gradually getting deeper.
Brand new electric power Weed Eater lawn Mower, started up like a champ, started vibrating and was loud, shut it down, now it won’t start. Checked the extension the outlet all seems fine. Didn’t even use it yet. Why will it not start?
ANSWER : Battery no good from factory bad battery connection maybe put together on a Monday or maybe battery internal charger no good
Ryobi troubleshooting Recently bought the two set package of 18V lithium batteries however the tool will not work. It was working however it has stopped . Tried two different batterie , both fully charged ,with no results.
ANSWER : The motor may have overheated and burned open. Use a multimeter to check resistance across the battery contacts in the tool with the switch closed. If it reads open, the motor has failed.
How do you fix a battery problem with my lawn mower because it wont start but it is charged
ANSWER : I think the motor brushes are warn out and need replacing.
Battery?, wiring?? Had a recent problem with blades not engaging. I have had also had a slightly older issue of battery not holding charge so i have to boost or jump start mower. I went out and bought brand new battery and after one usage it would not hold charge and blades will still not engage. Would the issue related to the battery effect the engagement of the blades???
ANSWER : If your Alternator didn’t charging the battery, even though you brand new battery will not last. So there is two possible cause, 1) Your Alternator is not functioning. 2) there is a wiring problem that causing your battery to discharge easily, but you check it after you switch off the key remove the battery negative terminal then touch it back to batt term. and see if there is little blue spark, if does your wiring system got problem. If not, so your Alternator do not charge the battery.
Tines wont engage on my troy built pony. How can i fix it?
ANSWER : The lever for the tines moves easily? Is there an adjustment on the linkage that may need tightening?
I have a troy bilt pony with a 6hp Tecumseh engine. It’s difficult to start and when I get it started I have to leave the choke on or it will die. Also it doesn’t run as it should. I drained the old fuel and put new in which helped a little, but still dies when I take the choke off.
ANSWER : I recommend cleaning the filter with gasoline if its foam or replacing it if its paper. If this doesn’t fix the problem you should remove the carburetor (in between the air filter box and the engine) and cleaning it thoroughly with carb cleaner from your local parts store.
Won't start no fire – Troy Bilt Pony 6.5 Hp Rear Tine Tiller
ANSWER : If you are not getting fire to the plug you first disconnect the kill wire then check for fire again. If you still have on fire replace the coil, if you do get fire check the switch then the wire for a short.