Garden

Experienced gardeners share their insights in answering this question :
Check shear pins

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

Remove any chips and press the reset button. Wait one minute before pressing the ON/OFF switch to restart the unit. The hopper is opened. Check to make sure the hopper is secured and the lock knob is tightened.
Is there a parent company, or is Sun Joe® affiliated with any other brands? The parent company is Snow Joe, which includes Snow Joe®, Sun Joe® and Aqua Joe® brands. The Snow Joe company was founded in 2004 and is both the #1 brand in cordless and electric snow blowers and the #1 brand in electric pressure washers.
All Aqua Joe hose nozzles are backed by a 2-year warranty.
Check plug socket, cable, line, plug and fuse; if damage is found, contact a qualified electrican to repair. The equipment is not switched ON. Switch on the equipment (see “Switching ON/OFF”). Safety stop switch is activated due to missing or incorrectly inserted pleated filter or wire filter basket.
The parent company, Snow Joe, has global manufacturing facilities in the USA, China, India, Taiwan, Italy and Japan.
Joseph Cohen is the Founder & CEO at Snow Joe.
(Retail: Service) If a warranty is offered with goods, the buyer is given a written guarantee that the manufacturer or retailer will repair or replace the goods, under certain conditions. The service contract extended the warranty on the product to two years.
OUR PROMISE: Snow Joe® + Sun Joe® warrant new products for two years from the date of purchase. If your product does not work, or there`s an issue with a specific part, we will fix this by either sending you a free replacement part or by sending you a new or comparable product at no charge.
Our Warranty: Snow Joe warrants new, genuine, powered and non-powered Products to be free from defects in material or workmanship when used for ordinary household use for a period of two years from the date of purchase by the original, end-user purchaser when purchased from Snow Joe or from one of Snow Joe`s authorized …
If only one of the two augers on your snow blower will turn, it is likely that the shear pin that connects to the driveshaft has broken. Both augers, as well as the impeller, are all connected to the drive shafts by shear pins that are designed to snap if they are met with a certain amount of force.
On a cool grill, remove the grates, drip pan, heat baffle/shield, and hopper to see the auger parts. If the auger has pellets stuck inside the auger shaft and is not turning, it is most likely jammed.
Check the fuel or spark plugs—each is fairly simple to do. First, drain the fuel from the tank and refill it with fresh gas. Next, try replacing the spark plug by disconnecting the rubber boot attached to the plug and removing the plug with a ratchet wrench.
Go ahead a place your hand on each auger in turn; they may move slightly; that`s normal, but they should not be free to spin. What is this? If you can spin it, your shear pin has sheared.
Check the fuel or spark plugs—each is fairly simple to do. First, drain the fuel from the tank and refill it with fresh gas. Next, try replacing the spark plug by disconnecting the rubber boot attached to the plug and removing the plug with a ratchet wrench.
The issue for snow blower not starting can be caused due to many reasons like clogged fuel line, electric start problem, bad spark plug or any others.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

I put my snow blade on successfully, but the tractor does not start now! What to do?
ANSWER : Did it start before you installed snow blade? Did you remove mower deck? If you removed mower deck you probably had to unplug blade safety switch. This is a plug in deal, look underneath and see if it is hanging, there is probably a place on the snow attachment to plug into,or you can jump around it by plugging a wire into each hole. (please note I am assuming it ran good before you installed the snow attachment).Hope this helps.

Read Full Q/A … : Garden

How to change mower blades – Cub Cadet Riding Lawn Garden Tractor 25hp Kohler 50"
ANSWER : Fine a way to stop blade from turning, put a socket with long handle and turn countercock wise, some will need a wench on nut at top of shaft to stop blade from turning, torque to 60 # on most 50″ or lower width mowers

Read Full Q/A … : Garden

Exmark 44 Mower bogs down going forward
ANSWER : When you say ‘going forwaed’, is that while mowing or does it do it without the blades engaged or ‘not mowing’?

Read Full Q/A … : Garden

Have a 22 inch yard machine snow blower the belt that turns the blades broke what size belt does it take
ANSWER : MTD has made many 22″ machines over the years. Please repost your question indicating the model #

Read Full Q/A … : Garden

How do you install blade on 12hp LT model no.917.254241
ANSWER : What model blade do u have? can you email a copy of the installation intructions?

Read Full Q/A … : Garden

Power to turn the blades is intermitent. What should I look for?
ANSWER : Loose connection, corrosion on connections. If this machine is new to you, do you have to have the brake or clutch on to activate the blades? I would lean towards wires/connections as the cause of your intermittent problem.

Read Full Q/A … : Garden

Only one blade turns automatically on Ariens snow blower.
ANSWER : There is a bolt that goes through the center of the shaft that shears off if you hit something. You will need to line up the holes of the internal shaft with the auger tube and install a new bolt.

Read Full Q/A … : Garden

Toro ccr 2450 snow blower. — starts ok but won't move forward. — blades turn ok — just won't go forward. — what can be wrong ???
ANSWER : Is there a breaking system that was left on?

Read Full Q/A … : Garden