pered
Other than holding the wheel hub to the axle, what is the purpose of these bolts. why are they “tapered” and why is there a left and right?

Looks like they could be replaced with a common bolt and nut.??
Garden

Experienced gardeners share their insights in answering this question :
I think that the tapered nature of the bolt may indicate that it’s different than a regular bolt and nut. But, if you can fit a regular nut on the threads, and the hardness and strength is the same or exceeds that of the OEM part, then I would use it if it’s a simple nut and bolt that holds the machine together.

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

The model number and serial number label on a Snapper Riding Mower is located on the lower right-hand side of the frame above the right front tire.
As a part of the Briggs & Stratton, Snapper headquarters is located in Milwaukee, Wisconsin. The American company provides more than 3,000 American jobs, assembling Briggs engines in plants throughout the United States. Still have questions about the Snapper brand or manufacturing practices?
The fuel filter might be clogged. A clogged fuel filter is most commonly caused by leaving old fuel in the lawn mower. Over time, some of the ingredients in the fuel may evaporate, leaving behind a thicker, stickier substance. This sticky fuel can clog up the fuel filter and cause the engine to run roughly.
In 2002 Snapper was acquired by Simplicity Manufacturing, which was then acquired by Briggs & Stratton in 2004. Since then the Snapper brand name has been added to products such as weed trimmers, hedge trimmers, leaf blowers, among others.
You can find a select range of outdoor power equipment, including lawn mowers & tractors, trimmers & blowers and our full line of battery-powered garden tools.
How can I identify my Snapper mower, snow blower or outdoor power equipment? To identify your Snapper, locate the product identification label on your unit. Click here to locate the product identification label. The product identification label contains the model number and serial number of your Snapper product.
Briggs & Stratton is the world`s largest producer of engines for outdoor power equipment, and is a leading designer, manufacturer and marketer of lithium-ion battery, standby generator, energy storage system, lawn and garden, turf care and job site products through its Briggs & Stratton®, Vanguard®, Ferris®, Simplicity …
“Homeowners are attracted to the mower because Snapper is a great product,” says Dwyer. “It`s a heavy-duty machine that lasts a long time.” The product`s design makes it easy for a homeowner to just hop on and mow. This makes the mower accessible to first-time riders who previously used walk-behind models.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Snapper riding mower….Series 23, Model 2812523BVE(7800104)
Part 7011035 Axle Bolt Left Hand, Tapered
Part 7011013 Wheel Bolt.Right Hand, tapered
Other than holding the wheel hub to the axle, what is the purpose of these bolts. why are they “tapered” and why is there a left and right?

Looks like they could be replaced with a common bolt and nut.??

ANSWER :

Read Full Q/A … : Garden

Snapper riding mower….Series 23, Model 2812523BVE(7800104)
Part 7011035 Axle Bolt Left Hand, Tapered
Part 7011013 Wheel Bolt.Right Hand, tapered
Other than holding the wheel hub to the axle, what is the purpose of these bolts. why are they “tapered” and why is there a left and right?

Looks like they could be replaced with a common bolt and nut.??

ANSWER : I think that the tapered nature of the bolt may indicate that it’s different than a regular bolt and nut. But, if you can fit a regular nut on the threads, and the hardness and strength is the same or exceeds that of the OEM part, then I would use it if it’s a simple nut and bolt that holds the machine together.

Read Full Q/A … : Garden

My snapper mower only has two forward gears and no reverse. the clutch is worn. Could replacing the clutch fix the problem or is there something else going on with the transmission?
ANSWER : Typically if your clutch is worn, you would experience some slippage in all gears. If your forward gears work, but reverse does not, you should be looking at a potentially more serious problem.

Read Full Q/A … : Garden

Is the rubber on the drive wheel on the snapper mower fixed to the metal hub? The rubber wheel part of the drive is not securely attached to the metal frame and slips when the mower goes up hill. Should I replace the drive wheel?
ANSWER : Yes, it may have gotten excessive oil on it and swelled the rubber. Replace the drive wheel.

Read Full Q/A … : Garden

Either need to rebuild carborator or clean it ?
ANSWER : Most small lawn mowers have a carborator mounted on the gas tank.if you take the screws out and look it has a gasket and the gasket will be bad and need to be replaced also if it is a newwer model it has a primer bulb that needs to be replaced at same time.

Read Full Q/A … : Garden

Change rear wheels on self propelled lawn mower
ANSWER : Unbolt wheel or re move hub cap or a nut cover pull of the retaining clip remove wheel reinstall in revers with new wheel retainig clip if bolt just tighten up

Read Full Q/A … : Garden

Would like a drawing or parts listing for a model 197 258492 craftsman riding lawn mower
ANSWER : Go to www.searspartsdirect.com Put in your model number in and it will come up with diagrams and parts list.

Read Full Q/A … : Garden

Need to get electrical parts for kohler 25 hp commamd engine. sticker on engine is bad so cant find model number of parts needed.
ANSWER : Then take it to a dealer and let them figure it out

Read Full Q/A … : Garden