Kranzle Professional 1600 PSI Pressure Washer
How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
Kranzle is an undeniably great brand – if not one of the best in the industry. Efficient, durable and exceptionally high quality. So, if you`re looking for a pressure washer for truck / tractor cleaning, cleaning vineyards, vehicles or washing driveways, we recommend checking them out.
To properly power your Kranzle 1122TST, 1622TS or 1322 electric pressure washer we recommend at least a 4,800 watt generator.
We Liked: Considering a modest bar output of pressure, the machine packs a punch due to how it displaces the pressure and leaves many rivals wanting. Superb build quality, robust and bulletproof in feel. Huge 10m pressure hose with reinforced material to help prevent splitting and wear.
You`ll notice the difference with the Karcher being a higher flow rate. That`s what you want to be looking at, the extra will make using it faster and more pleasurable. That said, you`ll notice the build quality of the kranzle and it will more than likely last a lot longer than the karcher if you look after it.
The built in hose reel and folding handle make storage fast and easy. The K1122TST also features built-in easy-start and includes a ground fault interrupter (GFI) to keep you safe from electric shock. With proper care and maintenance, Kranzle electric pressure washers are known to last 20 years!
Since most inlet water temperatures are around 60 degrees F, the typical hot water pressure washer can clean with a maximum of 180° F at full pressure and flow.
The Kranzle 2160 TST package is the upgrade to the 1152 TST for those that use the machine every day, due to low rpm pump it has even more durability. The Kranzle 2160 TST package is the upgrade to the 1152 TST for those that use the machine every day, due to low rpm pump it has even more durability.
Features & Benefits: Performance 130 Bar (1,885 psi), 7.5 litres per minute (450 litres hour) Automatic stop / start system.
50 Lakh – 1 Crore Approx.
Key parts of the Titan and noticeably better quality (and more useful) than the Kärcher and Nilfisk, including a transparent filter for the water supply which makes it easy to spot blockages and a build up of crud which will slow the flow.
The Kranzle K7 is a professional machine which runs a powerful 120 bar of pressure with 7L water flow per minute.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
1750 psi Electric Pressure Washer: My pressure washer is losing pressure and is pulsa…
If the pressure washer is pulsating then that is a sign of check valve failure. You may be able to clean of replace the check valves. Replacing the head is the wrong way to go. This is completely unnecessary. If you can tell me the model number of your pressure washer then I can assist you better in pointing you in the right direction.
Kranzle electric washer will not suck up soap
Hi, if it has a chemical injector on the machine then the pressure at the lance will have to be lowered for it to pull in soap. it works on a similar principle to how carburetors on cars pull in fuel, bernouli principle. high pressure at one side of an orifice going to low pressure at the other side which causes a negative pressure ( vacuum) which should pull in the soap. there should be a non return valve at the orifice (hole) which prevents the water back feeding into the soap container, it is quite common for this valve to get stuck, it is just a ball, spring and o ring , and the ball sticks to the o ring. if it is this system then take the soap pick up pipe off the injector and just push the ball off it’s seat with a bit of wire.If it is a high pressure soap system then that is different, but they usually work with an injector in my experience.try taking the high pressure hose off the front off the machine and running it, if it has an injector on it it should pull in plenty off soap.hope this helps ,andy
<!– from fixya rte –>How do I set the pressure? – Dewalt 3800 PSI Pressure Washer
There is an adjust screw on the pump.most pressure are set for the high setting from the factory
Need help in getting Honda engine on NorthStar pressure washer to run.
Could be low water pressure I have found.Also, I purchased a can of “stuff” at Lowes today which allows you to circulate a liquid substance which lubricates the pressure pump….the pump could be frozen up…I have a rotating nozzle which I bought…and it had frozen up…this stuff works
Oil appears to have come out of the oil filler cap. Is this a sign of overfilling the oil, or something else?
Id definitley say its over filled. try checking the dipstick
How do you bypass the cut off switch – Dewalt 3800 PSI Pressure Washer
Connect the white and black wire together
Pressure washer shuts off overheating
If you are using an extension cord this will happen. If using an extension cord make sure it is a 12ga.If you are not using an extension cord then it could be a bad motor or low voltage from the source.
Honda powwer boss 3000-whenyoupull the handale to spray it kills the engine
Sounds like the unloader (regulator). Try removing the nozzle, the pull the trigger with the engine running. If motor is still running then it could be the Unloader malfunctioning. If you require a new one try a bypass system for the unloader. The bypass will help save the life of the unloader.