Experienced gardeners share their insights in answering this question :
Your muffler is clogged,look on line or call your local dealer for part.Here’s a link to the parts.
How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
If your chainsaw still starts and then stops working, check the air filter. Clean or replace the air filter if it is dirty or damaged. Another reason that your chainsaw starts and then stops working could be that the spark arrestor is dirty or clogged.
If the spark plug produces a spark and you are still having difficulties starting your chainsaw, it`s time to check the gap. The spark plug gap is an air gap between the ground electrode and the center electrode. If the gap is too small, the spark struggles to ignite the fuel and air mixture.
1. Dull chain and or improper lubrication to the bar and chain, sharpen and or clean the bars oil holes. 2. Air filter and fuel filter for restrictions and contamination, clean or replace as needed.
The fuel line may be clogged from stale fuel deposits, more reasons to cause your chainsaw to cut out when applying throttle. If a fuel line is cracked, it will leak gasoline and draw air from outside into the fuel line. If the line is leaking fuel, it needs to be replaced.
One tell-tale sign that a chainsaw has flooded is the smell of fresh petrol near the muffler. To ascertain whether this is indeed the problem, simply disassemble the part, pull the starter cord as if you were switching on the engine, then dry it, reassemble it and try switching it on again.
A dirty carburetor, bad gasoline and low-quality two-stroke oil that creates deposits all contribute to chainsaw starting problems.
Common signs include reduced engine performance, black smoke coming from the exhaust, backfiring, overheating, or hard starting.
Q: How Do I Know if My Carburetor Needs Adjusting? A: Simply put, poor running conditions are a dead giveaway. A rough idle, poor throttle response, and excessive fuel consumption are all signs to look for. If the carburetor was sitting for some time or hasn`t been serviced in a while, you may need to clean it first.
This method involves looking at the base of the spark plug insulator (white part of the plug) for a slight coloring on the insulator just above where the insulator comes through the steel case. If the mixture is too lean, it will leave no color, while a rich mixture will cause the fuel ring to become more prominent.
The two most common reasons a chainsaw won`t idle are a blocked air filter and an idle screw out of adjustment. Other possible causes include: Dirty Air Filter.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
Where is the blade oil lines on a 455 rancher
What years did husqvarna make model 61 – Husqvarna Chain Saw 20" Bar
Late 70’s into the early 80’s.
What is correct husqvarna 268 chain file size
For the standard H80 or H81 style chain you will use a 7/32″ (5.5mm) file
What information can you tell me about a Husqvarna chainsaw model 61 with serial number 6136460. Does it indicate the year?
Most of the CDI modules have been superseded to part no# 544018401check with your local dealer to verify.
Where do i find the oil lines on a husqvarna 455 rancher
Saw runs fine for about 15 minutes,then the idle speeds up,then it dies,almost like it is flooding
Do aclean or overhaul of all fuel components.Change the spark plug or the coil aka=spark plug cable.But if your saw in lees the 2 yrs you need to follow the starting guide in order to avoid flooding.If you need more help come back.Post / thumbs / testimonial are welcome!
Kill switch doesn't work, how do i fix it? – Husqvarna 350 18 Inch Gas Chainsaw 52CC Fully Assembled Brand New 18"
The switch connects directly to the coil body of the ignition module. You may have to remove the left side cover to expose the ignition module. The switch, when off, connects this wire to engine ground. There may be debris in the contacts of the switch that prevent contact. You will have to remove the air cleaner assembly and maybe the carburetor itself to access the switch. Good luck!
Husqvarna problems Why won’t the chain spin?
Replace or clean the Drive Clutch.