73740 SPDY GREEN 3000 B/C S 3 EA 13610498

What is the setting for scotts speedy 3000 for 4 lbs per 1000 feet?

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

Setting: 5 lbs. / 1,000 sq.
After applying this product you don`t water your lawn for at least 24 hours. Just like rain, watering your lawn after applying Weed & Feed washes the weed control particles off of weed leaves before they can fully work.
Apply to wet or dry lawn on a calm day.
No need to water-in; however watering during dry periods will hasten results.
Ideally, you should fertilize your lawn with the right ScottsĀ® Turf BuilderĀ® lawn food for your grass type 4 times a year: in early spring, late spring, summer, and fall. Feedings should be spaced 6 to 8 weeks apart.
Place your spreader setting on a low setting (usually one-fourth of the spreader setting range or less). Spread the material over a 50 x 20-foot area (1,000 square feet). If there is material left over, increase your setting. If you come up short, decrease your setting.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

The handle on my Accugreen 3000 is broken, do you have a phone number for customer service?
ANSWER : Contact Scotts online and they will Fedex the whole handle free. No kidding.

I have a speedy green spreader. I would like to know what setting to use for overseeding. The bag of seed does not have any settings on it.
ANSWER : It’s all is dependent on your square footage i can’t believe it’s not on your bag but maybe try Scotts website. or call your local home center.

Ineed the setting instructions. What the openning (gap)has to be at and what the number on the setting handle is when you adjust the openning so as to get the proper adjustments. I have a Scotts Speedy Green Spredder
ANSWER : On the back of the feed that you intend to use it is normally printed at what setting it should be You can aslo gauge it for your self be the flow of the granuals a rough guide is 5 or 6

Have Scotts Edgeguard DLX. The fertilizer is from Intermountain Farmsers- The option for the Scotts brand is Scotts Speady Green. They give three options the 1000,2000 and 3000. Which option is teh Edgeguard?
ANSWER : I realize this is an older question but in case anyone has a similar question The Scotts Edgeguard DLX equivalent would be the Speedy Green 3000 suggested setting.

This is a Scotts Speedy Green 2000 model. What is the problem when the flat thing below the hopper quits turning to throw the fertilizer out onto the yard?
ANSWER : It’s important to have precisely the right setting. A little wide is better, because the product you’re spreading isn’t always even, but you’ll have to walk faster to ensure you don’t over apply. This is a notorious problem with those plastic spreaders – I’ve used them lots – and I find that if you stop suddenly with fertilizer in the hopper it instantly stops up. Backing up quickly, then jerking it forward seems to help most of the time.

Make sure you close the chute before you stop moving, and be quick with the chute release. Also, don’t fill it too much because when you run into this problem it makes it more difficult to remedy.

Speedy Green Parts
ANSWER : Replacement parts for your model can be found at amazon, click here and take a look: Amazon com scotts lawn parts. I hope this was helpful. Cheers

How do i calibrate my scotts speedy green 3000 broadcast spreader?
ANSWER : From the OEM Scotts SpeedyGreen 3000 Broadcast Spreader Owners Manual: Calibration Your SpeedyGreen 3000 spreader was calibrated at the factory. You may check the calibration as follows: 1.) Adjust the micrometer setting to 2. 2.) Squeeze the trigger against the handle. 3.) The Calibration line engraved in the Green casing above the top of the shut-off plate should be flush with the back edge of the hopper opening. 4.) To adjust alignment, use a small wrench to turn the black calibration screw at the lower end of the control wire leading from the micrometer rate setting barrel.

I have a speedy green 1000 and the drop chute will not close is there a repair kit for this machine?
ANSWER : Phil, Check the attached links,instruction and guides contact Scotts if you have to. Good luck
“I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info.”
Help Center Contact Lawn and Grass Experts Scotts

Scotts Speedygreen 1000 law spreader spring repair

Replacing Rusted Axle on Scotts Speedy Green Spreader

scotts speedy green 1000 parts diagram Google Search