Ryobi

Experienced gardeners share their insights in answering this question :
The primer bulb has 2 out lets on it the short one feeds the car and the long out let feeds the tank Slice the hose to the tank and feed it intothe tank about 8 inches and hook out with a wire hook to cut the slice off and put on a new filter. Push it into the tank and be sure lays on the bottom of the tank..

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

The primer bulb is generally placed close to the engine, and usually downstream of any fuel filters or water-separtors. Many new engines are delivered without a fuel disconnect fitting, and instead just provide a short stub of fuel line from the engine cowling. This makes a natural place to connect a primer bulb.
The (clear) main fuel line with the filter (filter inside the fuel tank) goes to the bottom of the carburetor (or the elbow shaped nipple). The (clear) fuel intake line runs from the top of the carburetor (straight nipple) and goes to the short post on the back of the primer bulb.
In gasoline cars in U.S., the return line was the fuel flow outlet of a back-pressure regulator on the fuel injector rail on top of the engine. It flowed back into the fuel tank.
The most common materials used to make gas piping are steel, black iron, polyvinyl chloride (PVC), high-density polyethylene (HDPE) and copper. Some utilities prohibit some of these materials, so be sure to check with your local utility to determine what is allowed in your area before you install any.
The most common materials used to make gas piping are steel, black iron, polyvinyl chloride (PVC), high-density polyethylene (HDPE) and copper. Some utilities prohibit some of these materials, so be sure to check with your local utility to determine what is allowed in your area before you install any.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

My blower seems to not want to go to ful throttle
ANSWER : This happened on my older Ryobi as well. Turns out it was the fuel lines. The ethnol in the gas made the lines swell up inside.

Read Full Q/A … : Ryobi

Do you mix gas and oil in this trimmer – Ryobi 30 Cubic Centimeter Curved Shaft Gas Trimmer
ANSWER : Yes. Verifythe ratio, either 40:1 or 50:1

Read Full Q/A … : Ryobi

Ryobi gas blower 200mph 2 cycle what is the ration gas to oil
ANSWER : I mix mine 50:1

Read Full Q/A … : Ryobi

What is the fuel ratio mixture for the ryobi gas blower?
ANSWER : The best fuel/oil ratio for that is 25:1

Read Full Q/A … : Ryobi

My trimmer is leaking fuel help – Ryobi 30 Cubic Centimeter Curved Shaft Gas Trimmer
ANSWER : Change your primer bulb and/or fuel lines.

Read Full Q/A … : Ryobi

What type of oil goes in the Ryobi 08570 Blower? What is the oil gas mix ratio?
ANSWER : You need 2 stroke motor oil or chain saw oil.Mix it according to the lable to make up 50:1 oil/gas mix.

Read Full Q/A … : Ryobi

Remmoved the fuel tank to re-insert the fuel lines more easily. Where does the fuel filter fit in the system? Haven’t found a diagram to show this detail. I have a McCulough Model 290B with a 25cc engine.
ANSWER : At the end of the fuel suction line in the gas tank.If really helpful, please rate.

Read Full Q/A … : Ryobi

What is the gas/oil mixture ration for a Ryobi gas leaf blower?
ANSWER : 40 to 1

Read Full Q/A … : Ryobi