Briggs & Stratton

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

Disconnected, dirty or fouled spark plugs are common causes for engines that won`t start. For small engines, spark plugs typically need to be replaced every season or after 25 hours of use. You should also check to make sure the spark plug gap is set correctly.
The engine`s code number indicates the exact date it was manufactured. This system provides an easy way to determine the age of your small engine. The following is an example of interpreting the date for the code number 99011556: The first two digits (99) denote the year of manufacture.
How Do I Identify a Briggs & Stratton Engine? The Model, Type and Code numbers, stamped directly into the engine, are used to identify our engines. Engines used in lawn mower applications usually have the model numbers stamped directly into the blower housing, muffler heat shield, or a few inches above the spark plug.
Knowing the model number of your Briggs & StrattonĀ® ride engine will make it easy to order maintenance or repair parts online or from your local dealer. The engine model number is the first 12 characters stamped into metal directly on your engine in one of two locations – on the valve cover or an aluminum tag.
Please Note: Briggs & Stratton engine model numbers are 10 characters.
To determine the year of manufacture for a tractor with a six digit number use the following formula. Take the first and the fourth digit, and subtract three to get the year. For example, the serial number of 395602 would be: 36-3 = 1933.
Finding your model number and serial number is as easy as locating the identification tag on your machine. As seen in the example, the model number will be displayed below the MODEL heading (Example: Z235), and the serial number will be underlined on the top-right corner of the tag (Example: 130002).
The buying spree lacked strategic focus and ultimately failed to turn around the company`s decline. Rather than investing in research and innovation, Briggs` management tried to buy success while continuing to enrich its executives and stockholders.
InStartĀ®: Easiest Starting Ever

Our InStart technology means no more pulling the cord to start mowing: just push the button or turn the key for instant starting! With the latest lithium-ion battery technology, InStart provides the ultimate in starting performance.

1830: The first lawn mower was invented and patented in 1830 by Edwin Budding outside Gloucestershire, England. This first mower was primarily designed to cut grass on sports grounds, cemeteries, and extensive gardens. Pushed from behind and made of wrought iron, Buddigs first machine was 19 inches wide.
MTD`s current (1997 and later) model and serial numbers are generally 11 characters in length. A character could be a number, dash or a letter. If 0 represented all numbers and/or dashes and X represented all letters, the model and serial numbers should appear as follows: 00XX000X000.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

How do you remove the ignition coil? I can remove the bolt quite easily, but how do you remove the post which secures the other end of the coil?
ANSWER : Would of been very helpful if you would of mentioned the engine you are working on… model/serial numbers would of been even better !!!

Read Full Q/A … : Briggs & Stratton

MODEL # 12AVB29Q711 I NEED TO KNOW THE ALL THE GASKETS LINE UP INCLUDING METAL SPACER FROM CARBURETOR TO INTAKE THEY FELL OUT NOW NOT SURE WHAT GOES WHERE.
ANSWER : That is the serial number for the mower,what engine is it???

Read Full Q/A … : Briggs & Stratton

I have a chraftsmen rideing mower model number 917 271011 has two wires coming from stator one wire is berned off put back together and burned off again does this model have voltage regulator 15.5 kollar
ANSWER : It has the ammeter for the charging system

Read Full Q/A … : Briggs & Stratton

Riding lawnmower starts but will not continue stay running?
ANSWER : Its probably in your ingnition switch, grab the switch and turn it right the turn key I had the same problem and that fixed it. It also wasnt starting and it was the same problem the switch is lose.

Read Full Q/A … : Briggs & Stratton

Riding lawnmower 42 in husqvarna i changed spark plug and gave it gas and charged the battery it acts if it wants to start but it just doesnt turn over
ANSWER : Have you checked the air filter? Look at the filter and hold up to sunlight if you can’t see the light thru the filter then replace.

Read Full Q/A … : Briggs & Stratton

Poulan pro hydro 18.5-42 riding lawnmower – back wheels won’t turn – transmission trying to engage and rotate
ANSWER : Your hydro transmission is low/out of oil or it need to be rebuilt or a new one.

Read Full Q/A … : Briggs & Stratton

How to take off carbarator – Briggs & Stratton Briggs Stratton Lawnmower Lawn Mower Short Block
ANSWER : Usually there are two screws. On some newer mowers the same screws hold on the Air Cleaner housing.

Read Full Q/A … : Briggs & Stratton

Ride on lawnmower lr35 just clicking and wont start
ANSWER : Check battery and starter cables for tightness and corrosion. also battery voltage.

Read Full Q/A … : Briggs & Stratton