How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
In the most basic of definitions, blade offset is the distance from the tip of the blade to the center of its shaft. It`s also a measurement of the blade`s effective cutting width.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
Cannot remove mower blade pulley nut – John Deere 22HP VTwin 48" Riding Mower
I think its a left hand thread, you undo it clockwise (the “wrong” way)
I need to get the blade of the lawn mower sharpened.Any tips on how to disconnect the blade fropm the lawn mower?
There is a jig that you can buy that makes this job SO much eaiser. It is a universal jig that clamps onto the deck and keeps the blade from spinning so you can use a ratchet to remove the nut holding the blade on. One name brand is called a “Blade Hog”. You should be able to find one of these at one of the bog box hardware stores.
Hope this helps,
Which direction do you turn the bolt holding lawn mower blades on?
Clockwise to tighten. Remove the spark plug wire before working under there! Use a piece of wood to jam the blade against the housing so it will not turn.
What do I need to do to remove the blade adapter assembly for replacement?
You can remove it with a flywheel puller. I would use the one that has the flat hooks at the bottom of the puller. I would also use the blade bolt to push against with the flywheel puller. If you hook the flywheel puller onto the crankshaft there is a possibility that you could damage the threads for the blade bolt.
I hope this helps you out.
When I hold the bar down that engages the blade it will not cut?
Is the blade sharp?
Turn the right or left to remove the nut
All most every blade mount bolt turns out in a counter clock wise rotation facing the bolt head
Blade not engaging
The blade will spin automatically when the motor runs because it is connected to the main shaft. If it is not cutting, it will have to be removed and sharpened with a grinding wheel
Where is oil drain plug on MTD mower – Mtd LAWN MOWER PART # 683-04163B FRAME Assembly:RIDER
If it isn’t on the bottom of the engine (above the blade) then you don’t have one. This is not that uncommon. When you need to drain the oil, FIRST- pull the spark plug wire off!!! Then remove the dip stick or filler plug and turn the unit upside down and drain the oil.