Briggs & Stratton

Donnyg60 had told me how to get the nut off the flywheel, and he also said that the flywheel would be hard to get off. Well it is! Any suggestions as what I can do to get the flywheel off without breaking it. I do not find a good place where I can get some leverage to pry flywheel off. Your suggestions are appreciated.
Thanks

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

Click Sites in the main menu. Click a site name to be taken to the site`s dashboard. Hover over the gear icon and select the Delete site option from the dropdown menu.
1 1/2″ does the trick, just did one in car not to long ago. Make sure you have the room for a deep socket.
Click Sites in the main menu. Click a site name to be taken to the site`s dashboard. Hover over the gear icon and select the Delete site option from the dropdown menu.
The bolts on this flywheel puller have a centre of 41mm and are 62mm long.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Rear wheel removal from craftman riding mower
ANSWER : Do you have the rim and tire off and you want to remove the hub?
I believe every rider mower and tractor I’ve had and worked on had the rear tire attached to the hub as in a car, with lug nuts or lug bolts. Check to see if there are four or five lug bolts that hold the rim onto the hub.

Read Full Q/A … : Briggs & Stratton

How do I remove the clutch on an Echo chain saw??
ANSWER : Backwards to the rotation of the motor, all you need are basic tools to do this.

Read Full Q/A … : Briggs & Stratton

How to remove deck on 1045 cub cadet to remove and sharpen blades
ANSWER : You should be able to remove the blades without removing the deckThey bolt on from underneath with either a single or double bolt set up90% + are single bolt

Read Full Q/A … : Briggs & Stratton

Can I replace the blades on my 38in MTD/Yard Machine ride on without removing the deck? ie. from underneath.
ANSWER : If its in good condition you might be able to but be careful so mower doesn’t fall on you. I’ve used my car ramps and backed the mower up the ramp and was able to do it safely. If you have any difficulty removing the blades, then I’d take the deck off. It really isn’t that hard to remove the deck.

Read Full Q/A … : Briggs & Stratton

Cannot remove mower blade pulley nut – John Deere 22HP VTwin 48" Riding Mower
ANSWER : I think its a left hand thread, you undo it clockwise (the “wrong” way)

Read Full Q/A … : Briggs & Stratton

Owners manual for craftman’s model 917.275520riding riding lawn mower
ANSWER : Go to www.searspartsdirect.com , put in your model number and it will take you to the parts listings for that model, also, if you look to the right side of the page there is a link to download a full Owner’s and Parts manual

Read Full Q/A … : Briggs & Stratton

New coil for chainsaw
ANSWER : The coil is on the flywheel side of unit. remove the recoil cover and you will see the flywheel and coil. your have to remove the ground wire from shut off switch and two bolts holding coil in place. when installing new coil you need to leave a 10 thousand air gap between the coil leg and the flywheel magnet for proper operation

Read Full Q/A … : Briggs & Stratton

The mowing deck on craftmans lt200 is leaning to one side. this causes an uneven cut
ANSWER : I think one of the hangers has become disconnected. There should be a leveling procedure for this in your owners manual. If you dont have that manual … you may find the leveling procedure at the Sears web site. Leveling procedure is pretty standard … the basic idea is get on a level surface — your garage — measure from the deck to the floor on 4 corners … make adjustments as required front to back and then side to side. Once you are on the floor … you will see what to do.

Read Full Q/A … : Briggs & Stratton