Remington

What oil to use 2 cycle or 4 cycle

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

For all Remington 2-cycle products, the ratio is 40:1. This means you`ll want to add 3.2 oz of oil to every gallon of gasoline.
Most modern chainsaws, string trimmers, leaf blowers and other small-engine two-stroke equipment recommend a 50:1 oil mix ratio, but some recommend 40:1 and older two-stroke equipment might even call for 32:1.
NO, outboard two stroke motor oil designed for water cooled engines does not provide the needed protection or lubrication for two stroke air cooled engines.
Chainsaw oil is sticky stuff for the chain! 2-stroke oil is oil you mix in fuel for the engine! You can put 2-stroke oil in the chain oil reservoir but not mix chain oil in your fuel. Your chain won`t last long with 2-stroke oil in the chain oil reservoir.
The fuel and oil mixture should always be 2% (50:1).
Husqvarna two-stroke engines are designed to run on clean, fresh, unleaded petrol.
Use a 40:1 two-cycle oil mix ratio. One gallon of gasoline combined with 3.2 oz of two-cycle engine oil. Unsure of the age of your equipment?
For a 50:1 ratio of gas to oil, use 2.6 fluid ounces of oil per gallon of gas. For a 40:1 mixture, use 3.2 fluid ounces of oil per gallon of gas.
A 100ml bottle is suitable for mixing with 5 litres of fuel to achieve a 50:1 fuel-oil ratio.
What type of oil do electric chainsaws need? Electric chainsaws use the same type of bar and chain oil which gas chainsaws use. Using a great quality bar and chain oil will keep the friction low and properly lubricate all the moving parts. The best oil which we`ve found is the bar and chain oil by Husqvarna.
This means that the viscosity of this oil ranges (5w30) from 5 when it`s cold to 30 when it is hot. This oil is good lubricating for light-duty diesel and petrol engines. So, you can use it as a Chainsaw Bar Oil.
Electric chainsaws need oil for lubrication and protection of the chain and guide bar. The oil dripped on the guide bar is protecting it from damage and overheating. Unlike gas-powered chainsaws that need fuel mixed with oil, electric chainsaws do not need oil as a fuel component.
Does the pole saw use oil? Yes, bar and chain oil is required to properly lubricate the cutting system. Oregon Bar and Chain Oil is recommended for the PS250.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

What type of oil does it use? – Troy-Bilt 4-Cycle Curve Shaft Gas String Trimmer #41ADT41C966
ANSWER : I think all of these 4-stroke trimmers use SAE 30HD oil. I recommend synthetic. If you use synthetic, you can get away with using a multi-viscosity like 10W-30 if you can’t find straight SAE30 synthetic, but don’t use muti-viscosity conventional oil in these machines.

Read Full Q/A … : Remington

What kind of oil in the oil tank and how much for the remington electric pole saw ?
ANSWER : Bar & chain oil is the best. You can use regular or synthetic. Some say you can use atf (auto transmission fluid) or sae30 oil. I use bar & chain oil.

Read Full Q/A … : Remington

Automatic shutdown computer trojen virus detected remove trojen virus please solution this virus
ANSWER : Hi,
Start your computer in safe mode…..

then download a program called Malwarebytes….

This program will fix you up…..

heatman101

Read Full Q/A … : Remington

What is the correct oil/gas mix ratio? – Mantis 2-Cycle Tiller
ANSWER : The 2 cycle needs oil and gas mixed while the 4 cycle needs the oil changed every 10 hours of use. 2 cycle is 28:1

Read Full Q/A … : Remington

What type of oil does a remington chain saw use?
ANSWER : Regular bar/chain oil available at home centers, hardware stores, and saw dealers. Hope this helps!

Read Full Q/A … : Remington

What is the gas oil mixture for this product – Craftsman 4 Cycle Blower/Vac
ANSWER : You don’t mix oil and gas for a 4 cycle engine. Please do not add oil to the gas. The oil has it’s own tank for lubricating the engine. Use regular unlead gas in the fuel tank. Use 10w30 oil in the oil tank

Read Full Q/A … : Remington

What type of oil do I use for pole saw? – Remington Polesaw Wizard
ANSWER : Use bar and chain oil (bar oil is SAE 30 with an addative to make stick to the bar and chain) available at home centers and hardwares. Excerpt from a Remington OM follows:
“FILLING OIL TANK
1. Remove oil cap.
2. Fill oil tank with SAE #30 motor oil.
Note: For temperatures below 30°F, use SAE #10 oil.
For temperatures above 75°F, use SAE #40 oil.
3. Replace oil cap at once. Tighten oil cap firmly for good seal. This will avoid oil seepage from tank.
4. Wipe off excess oil.
Note: It is normal for oil to seep when saw is not in use. Empty oil tank after each use to prevent seepage.”

If you have more questions or need additional help please reply below and I will get back to you. Thank you for using FixYa and Good Luck. HTH
Lou

Read Full Q/A … : Remington

What type of oil should I use for a remington pole saw
ANSWER : Regular bar oil available from home centers, hardware stores, and saw dealers. Good luck!

Read Full Q/A … : Remington