Black & Decker

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

You can leave the garden hose out of the equation. Portable pressure washers have an easy-fill tank to which you can add a certain amount of water, from your indoor tap or water supply. The tank and washer are integrated into a single device, so your power washer doesn`t need any additional technology.
The washing machine has hookups for two water lines on the back, one for hot water and one for cold. These lines are hooked up to the body of a solenoid valve.
This Two-Gun Tee Coupler converts a one-gun pressure washer into a two-gun system. This is a good way to power wash on a big job if you don`t have 2 machines. Quick connect this Branch Tee onto the pressure washer outlet, then connect two pressure washer hoses to either end of the 2-gun splitter.
A garden hose with a diameter of 1 ΒΌ inches can handle up to 2000 PSI so it will be able to handle almost any pressure washer out there without letting it kill your plants or blow up your neighborhood.It is also flexible enough that it won`t kink as you use it.
This indoor hose connection set gives you the flexibility to connect your power washer to an indoor tap. The threadless tap connector gives you that flexibility to use your pressure washer from an indoor tap. Giving you greater flexibility to use your pressure washer from anywhere.
Using a bucket to supply water to a Pressure Washer is also simple to achieve and can be done by using a suction hose; placing one end of the hose in the bucket of water and the other end connected to your Pressure Washer.
This indoor hose connection set gives you the flexibility to connect your power washer to an indoor tap. The threadless tap connector gives you that flexibility to use your pressure washer from an indoor tap. Giving you greater flexibility to use your pressure washer from anywhere.
Using a bucket to supply water to a Pressure Washer is also simple to achieve and can be done by using a suction hose; placing one end of the hose in the bucket of water and the other end connected to your Pressure Washer.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Soap feed The soap feed hose on my Karcher 2650 does not suck up the soap into the washer. I pulled off the connector piece that the hose is connected to. I can blow through the hose. There is a little metal finger thing that you can tell pushes up into place when the water pressure is high. It seems like it is supposed to drop down and allow some soap through when the water is running. I found a loose(attached to nothing) gasket, looks like a little donut. It was just free floating in there. I’m thinking it may go over the finger mechanism. I just put it back on top of the finger, like a halo and put the screw in piece back in. Anyway, if you know, let me know how all that goes together.
ANSWER : I fixed mine works good too, watch my video step by step i put it on youtubehttp://www.youtube.com/watch?v=UFXSLOBL0Mg

Read Full Q/A … : Black & Decker

The garden hose was used to siphon water from a dirty pool. The hose was connected to the pressure washer without cleaning out the hose and turned on. After a few minutes he couldn’t get pressure from the unit. Water does flow from the hose but it wont build up pressure.
ANSWER : Hello, check the hose connection on the pump. There is generally a screen there to prevent dirt from entering the pump. Clean off this screen and all should be well.

joe

Read Full Q/A … : Black & Decker

1750 psi Electric Pressure Washer: My pressure washer is losing pressure and is pulsa…
ANSWER : If the pressure washer is pulsating then that is a sign of check valve failure. You may be able to clean of replace the check valves. Replacing the head is the wrong way to go. This is completely unnecessary. If you can tell me the model number of your pressure washer then I can assist you better in pointing you in the right direction.

Read Full Q/A … : Black & Decker

<!– from fixya rte –>Rope pull start is stuck, won't pull out – Honda Black Max 2600 PSI Pressure Washer
ANSWER : Check the oil level, if it’s very low or burnt then it may have siezed up internally.
It could also be that be that the cylinder is filled with oil or fuel.
if the washer was tipped over the fuel or oil may have migrated in to the piston combustion area.

Read Full Q/A … : Black & Decker

How do you bypass the cut off switch – Dewalt 3800 PSI Pressure Washer
ANSWER : Connect the white and black wire together

Read Full Q/A … : Black & Decker

Need help in getting Honda engine on NorthStar pressure washer to run.
ANSWER : Could be low water pressure I have found.Also, I purchased a can of “stuff” at Lowes today which allows you to circulate a liquid substance which lubricates the pressure pump….the pump could be frozen up…I have a rotating nozzle which I bought…and it had frozen up…this stuff works

Read Full Q/A … : Black & Decker

I have a 2000 psi simonize gas fired..Can.t get any water when pump is running. I took the. water pressure hose off on unit and still no water
ANSWER : If the unit has been stored you need to remove the bottom three plugs on inlet side of pump head and simply free the checkvalves that are in closed position needle nose recommended and small screwdriver to pry them open this is caused by the impurites in water that dry up and seals the head and disc together:):)

Read Full Q/A … : Black & Decker

I have a Clean Shot 2050 PSI washer. I can get it to start, but I have very little prerssure. A household shower has more pressure. The garden hose nozzle has more pressure. Any thoughts????
ANSWER : LOOK , THERE IS A FILTER WERE THE HOSE HOOKS UP TO THE UNIT, ITS A SCREEN.. ALWAYS PURGE THE HOSE FIRST BEFORE HOOKING IT UP TO THE UNIT !

Read Full Q/A … : Black & Decker