Starter pulley cord for dr strimmer

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

Serial Number and Order Number

A Serial Number is used to identify your machine and is located on the Serial Number Label on your machine. An Order Number is used to check and maintain your order history and is located on the upper left portion of your packing slip.

Today DR Power Equipment is a subsidiary of Generac Power Systems, Inc. and we offer an extensive line of gas- and battery-powered equipment that is available factory-direct or through our growing family of retail partners.
Light: 0.065- to 0.080-inch line is best for trimming grass around the house and whacking down common lawn weeds from around driveways, walkways and fences. Medium: 0.080 to 0.110-inch line is best for homes with larger lawns, or gardens overgrown with weeds that have tough, heavy stems. Heavy: 0.110-inch and above.
You need to leave about six inches of string hanging from the spool when you are done adding your new string. You should use a heavy-duty pair of scissors to snip the string.
“DR” stands for Dick Raymond, one of the founders of DR Power Equipment.
NOTE: Use only SAE 30 high detergent oil. Other types of oil could cause problems operating your machine.
The gas powered ECHO GT-225L weed trimmer features a 21.2 cc professional-grade, 2-stroke engine for outstanding performance. It features a 55in shaft length, 7in less than the GT-225 weed wacker model.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Pull cord is difficult to pull after third pull becomes stuck but will turn if pull hard repeats every three to four pulls.
ANSWER : No response to clarification request.

Read Full Q/A … : Garden

Troy Bilt Lawn Mower pull Cord broken
ANSWER : There should be four bolts holding the cover on that houses the pull cord assembly take the bolts out look inside you should see the rest of the broken cord at the other end there is a spool that the cord rolls up in to pull the cord until it stops the other end of the cord is a not in the cord pull on the knot the broken peice should come out turn the spool 2 times in the direction that is against the pressre while holding the spool in place feed the new cord in through the whole that you pulled the broken cord out of then tie the cord in a knot wind the rest of the cord up then feed the other end of the cord through the new pull handle tie the cord in a knot put the housing back on

Read Full Q/A … : Garden

The pull cord on my ZR29550 string trimmer is stuck in the fully retracted position. I can’t pull it to start the machine. Also the electric starter can’t turn it over.
ANSWER : Well its not going to start with electric because the cord is out of it…
just take it apart becareful do not pull the recoil out or your in a mess….
but this should help you out if you need to know more just ask…

Read Full Q/A … : Garden

Hi i wonder if you can help my Ryobi hedge trimmer has a problem with the pull cord it works goes in and out but it does not turn the engine over is there maybe a key way or something that maybe broken ??
many thanks
ANSWER : Hello Nick,

Inside the cord attaches to a plastic wheel which cranks the engine. This cord can become loose or can break after some use. Try opening the plastic casing where the cord is to see if this is the problem.


Read Full Q/A … : Garden

I have a troy-bilt TB514CS 4 cycle gasoline trimmer that the pull cord only pulls out about half way, not allowing me to start the trimmer. what can I do to solve this besides go to a mower shop?
ANSWER : You need to recoil the spring.

Read Full Q/A … : Garden

Pull Cord Will Only Pull Out 3-4 Inches Then Sticks
ANSWER : Take it apart as you did before. Look for whatever it is binding. Did you rewind the rope so there is a good amount of tension? If you didn’t, then do that . Good luck, Lee

Read Full Q/A … : Garden

I pulled the weed eater to start it and the pull cord stayed out and won’t return back it was working fine early about ten minutes before this happened need help with fixing can work on this myself if i can find out what’s going on “need help in St.Catharines”.
ANSWER : You need a new rewind spring most likely it comes as a part with the reel.

Read Full Q/A … : Garden

Pull cord replacing pull cord on troy bulit trimmer
ANSWER : Try this site it may help its called pats small engines

Read Full Q/A … : Garden