Meteor Above-ground 22″ Sand Filter System w/ 1 HP Pump

Experienced gardeners share their insights in answering this question :
I am sure that you already have an answer to this, but IF you can not read the valve label sticker, call the Pentair Customer Support 1-800 number. They will send you out a new label, free of charge.

For referrence, the waste position is ALWAYS over the waste port on the valve.

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

Pentair has three pool and spa filters, including diatomaceous earth (D.E.), cartridge and sand filter products. These filters generally function the same way; the pump pulls the water into a filter tank and passes through the filter (which is usually a netting, membrane, or sand).
A sand filter is essentially a tank full of sand that`s connected to your pool`s filtration network. As pool water passes through the sand tank, the sand catches debris and particles and prevents them from returning to the pool. This results in cleaner, clearer water.
As the name suggests, a pool sand filter uses sand to filter pool water. The water passes through a chamber filled with sand, trapping particles, debris, and other contaminants. The purified water flows out of the sand filter and back into the pool.
Sand filters have a lower filtering ability than both DE and cartridge filters. Sand filters only remove dirt and debris down to 20-40 microns, allowing smaller particles to pass into the pool water. They`re the least energy-efficient option.
The pool sand filter is a high-quality filter system. Unlike other filter systems, this type of filter catches both the large and small dirt particles. The large particles include debris such as hair, insects and leaves. Most filters catch this larger debris quite well.
Pool sand filters and kidneys play similar roles; they both purify and help keep your pool and body healthy. While you can also use chlorine and other useful chemicals to destroy the impurities in your swimming pool, the filter removes them from water efficiently and appropriately.
A disadvantage of sand filtration is the rinse water that is created when the sand filter is cleaned. This heavily polluted water must be treated and disposed of. To limit the load on the filter, a preliminary sedimentation step is implemented for heavily loaded wastewaters (a lot of suspended and sinkable matter).
A sand filter works as follows. The unfiltered water is distributed in the top of the sand filter and will slowly sink through the filter bed. This filter bed consists of sand, gravel or another filter medium. The small pores ensure that the dirt particles are not able to pass through and retain the dirt particles.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Pentair filter need to know where backwash, rinse & filter settings are
ANSWER : I am sure that you already have an answer to this, but IF you can not read the valve label sticker, call the Pentair Customer Support 1-800 number. They will send you out a new label, free of charge.

For referrence, the waste position is ALWAYS over the waste port on the valve.

Top mount backwash valve is leaking at port A. The O-rings are new and lubricated. How do I replace the backwash valve?
ANSWER : You probally just need to replace the top assembly and the spider gasket in the valve itself.

Replaced the top gasket of the filter, turned the filter on and the water was coming out of both the pool and the backwash at the same time and the motor began to smoke. Any clue what is wrong?
ANSWER : Try consulting the owners manual for these pool filters. They have a troubleshooting guide and set up guide. It should help you know how to correct your problem.

http://www.backyardcitypools.com/images/hayward/pro-series-manual.pdf

Runs How do I set timer and how long should it run
ANSWER : Pool pumps should run at least two hours for every one hour of pool use , this should be doubled if pool recieves a heavy useage of more than three swimmers timers on most of the intex models are set with trip pins , in towards center to be off and out from center to be on

Filter problem with hayward pool system – Hayward Pro Series Side Mount Sand Filter 30" S310s
ANSWER : You didn’t say what your exact problem was so troubleshooting with you might be difficult. Below is a link to the owners manual for these pool filters. You should be able to get your filter running properly using this.

http://www.backyardcitypools.com/images/hayward/pro-series-manual.pdf

How to prime a sand filter pump – INTEX Sand Filter Pump
ANSWER : It depends on the pump but most pumps have a filter bowl with a screw on cover – you need to fill this with water and start the pump. if the pipework connected to the pump and the filter are empty you will usually have to repeat this process a few times, but once the pump is primed it should start up without repriming in future – Hope this helps – Nigel

Pentair Clean & Clear 200. Filter core gets stuck to filter.

What should i have my filter on …..filter or recirculate
ANSWER : Filter and clean at back wash once a month