Garden
Experienced gardeners share their insights in answering this question :
Hello Ann. Most cities have one or more stained glass shops that specialize in cutting ornamental glass for customers or even repairing ornamental windows. look in the phone book under glass for starters. IF it is just a crack you can fix it yourself by applying some clear epoxy available from the hardware store. For additional information on doing glass repairs yourself, go to this link http://home.howstuffworks.com/how-to-repair-kitchen-equipment2.htm
Joe
Thanks for choosing this site!
How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
Door glass inserts are a quick, cost-effective, and simple way to completely transform the look of your entryway. By replacing broken or dated glass, or adding glass to a solid door, you`ll be able to completely change the look and function of your entrance in a single afternoon.
Transoms. A transom is a fixed glass window installed above the door and sidelights. They allow in plenty of natural light and help to brighten your entry.
Replacing the glass is more cost effective than replacing the whole window.
Replacing the glass is more cost effective than replacing the whole window.
Can the glass be changed in a composite door? All manufacturers have their own method of securing the glass pane(s) in the door panel, they are removable and can be changed. If your glass unit becomes misty, or it has broken you can easily change the glass without replacing the whole door.
Can the glass be changed in a composite door? All manufacturers have their own method of securing the glass pane(s) in the door panel, they are removable and can be changed. If your glass unit becomes misty, or it has broken you can easily change the glass without replacing the whole door.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
Had broken gas line, fixed it and now want crank, put new plug in
ANSWER : Check fuel flow to the engine. Make sure fuel line to the carb has fuel filter on the in-tank end and that it is clear. Make sure there is spark at the plug. Make sure your air filter is clean. Make sure the bolts to the engine cylinder and the lower crankcase cover are good and tight. If all the above check out OK, then you may need to remove the carb and clean it. Possible small fuel line particles entered the carb after it broke so the carb may need to be partially disassembled and cleaned. Post back as needed.
Read Full Q/A … : Garden
My front wheels won’t engage on my Toro. Belt is fine, and spool is turning. Looks like the box isn’t in the right position for the gears to engage. Is there a simple fix?????
ANSWER : Not with toro. this usually happens if cutting high grass. try taking it apart, clean it. make sure belt is not stretched out and jammed.
Read Full Q/A … : Garden
Lawnmower front wheels are locked
ANSWER : Take it apart and clean it. Grass and oil can easily clog any lawn equipment. Is it belt driven? If so turn the belt with your hand the way it would normally rotate. Follow the belt to the engine and clean the rotor if that doesnt work.
Read Full Q/A … : Garden
Ornamental Window in my front dooris broken. What’s the best way to fix it?
ANSWER : Hello Ann. Most cities have one or more stained glass shops that specialize in cutting ornamental glass for customers or even repairing ornamental windows. look in the phone book under glass for starters. IF it is just a crack you can fix it yourself by applying some clear epoxy available from the hardware store. For additional information on doing glass repairs yourself, go to this link http://home.howstuffworks.com/how-to-repair-kitchen-equipment2.htm
Joe
Thanks for choosing fixya!
Read Full Q/A … : Garden
Need to replace front left tire. Can’t get it off
ANSWER : If you have removed the hub cap (dust cover), the E-clip or cotter pin and washer from the outside of the wheel, it should just slide off the shaft but you may have a burr of some sort stopping it, try some sanding cloth, about 220 grit and smooth out the circumference of the shaft. If this still does not work, try pumping the wheel full of grease if it has a grease zerk on it. If the wheel turns freely when off the ground, you have something not clean or perfectly round stopping the outer race of the bearing
Read Full Q/A … : Garden
My front two wheels on my toro lawn mower will not move, and when I pull the handle up for self-propel, the wheels still don’t move and the mower makes a funny noise. Any ideas?
ANSWER : Look to see if the belt can off or broke… good luck.
Read Full Q/A … : Garden
Hit fence and right front tire is towing out. how do you get the alignment right?
ANSWER : Kevin plumag, you may have bent the tie rod. It’s an easy fix: each end of the tie rod connects to the axle, keeping the wheels at the right distance. Each end of the tie rod has a small cotter pin. Remove the cotter pin (a washer will fall off), lift out the bent tie rod, and put a new one back in, reinstalling the washer and cotter pin on each end.If your tie rod is straight, something else is wrong (which is why I’m searching the boards!). You can order a tie rod from Sears; check your manual for the part number.
Read Full Q/A … : Garden
My front wheels are suddenly out of alignment. I
ANSWER : There are plastic bushings on the front wheels that get worn over time. Pull the front wheels off and inspect them to see if they are still intact.
Read Full Q/A … : Garden
