Garden
Works great except that the time defaults to Pacific and I’m in the Rocky Mountain time zone. I’ve tried pushing set clock and then the -/+ button but it flashed 12 hr or 24 hr and then gets all wonky with a bunch of gibberish. Can you help me?
Thanks!
Thanks!
Experienced gardeners share their insights in answering this question :
Which model Oregon Scientific do you have? There are a couple that you need to set the time zone with a switch on the back of the unit. For the BAR388HGA-BK, you press and hold Mode for 2 seconds until it goes into the setting mode. Then you can use the up/down arrows to cycle through the Time Zone options. (1 is Pacific, 4 is Mountain). Press Mode again to confirm the setting and advance to the next item to change. You will leave the Set mode if you do not press a button for several seconds. If you just press and release the Mode button, then you can set the time display option.
A number of Oregon Scientific product manuals are available here:
Technical Support , http://www.oregonscientific.com/us/en/service/support . Scroll down and see the drop-down menu on the right.
I hope this helps.
Cindy Wells
How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
All of Oregon Scientific atomic clocks are automatically set to U.S. atomic time. No need to worry about adjusting your clock for Daylight Savings Time or for Leap Year.
The BAR208 wireless weather station monitors indoor and outdoor temperature from up to 3 remote locations. You can put a sensor outside in your garden, in your wine cellar and your baby`s room and read all that information from the comfort of your bedroom.
All of Oregon is on Pacific Standard Time, except for the Ontario city area in Eastern Oregon, which is on Mountain Standard Time. Daylight Saving Time is observed from the second Sunday of March to the first Sunday of November.
Selecting the time zone on most Oregon Scientific clocks requires pressing the “Mode” or “Clock” button for 2 – 3 seconds to enter into the clock settings. Typically the first clock setting is the time zone. Use the up/down or +/- buttons to change to the correct time zone.
Go to Settings > Manage my Home. Click on the 3 dots on the top-right corner and select “Location” Enter the desired address in the search bar or move the pin and click on “Confirm”
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
Assembly instructions for Palm springs 10 x20
ANSWER : Palm Springs 10’x30′ (3m x9M) party tent set up instructions.Hope this helps.
Read Full Q/A … : Garden
Pto will not engage
ANSWER : Check the safety switches
Read Full Q/A … : Garden
I need assembly instructions for a 6x3m party tent
ANSWER : Contact manufacturer directly, they usually prefer that you do.
They will be glad to forward you a set of instructions!
They will be glad to forward you a set of instructions!
Read Full Q/A … : Garden
How to remove pto clutch on cub cadet model 2186
ANSWER : Unplug it remove the center bolt and remove the bolt that stops the clutch from rotating
Read Full Q/A … : Garden
10 x 30 gazebo tent set up instructions.
ANSWER : Refer your request directly to Quictent.
Read Full Q/A … : Garden
My cub cadet runs fine untilm the pto is engaged then it backfires and dies?
ANSWER : Check the safety switch on the seat
Read Full Q/A … : Garden
I have a rzt 54 cub cadet, when i engage the pto it cuts breifly then the moer shuts down. Please help.
ANSWER : Run it with the gas cap off or loose if ok the vent in the cap is plugged
Read Full Q/A … : Garden
We lost the instructions onhow to put it together..please help. brown steel gazebo 10 x 12 x 6.8 ft
ANSWER :
Read Full Q/A … : Garden
