#TB4SC 25CC 4-Cycle Gas Blower

Experienced gardeners share their insights in answering this question :
The question states 4 CYCLE that means no oil needed in gas

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

Use a 40:1 two-cycle oil mix ratio. One gallon of gasoline combined with 3.2 oz of two-cycle engine oil. Unsure of the age of your equipment? Use the 40:1 mixture.
Fuel Mix. According to Stihl, gas and oil for leaf blowers should be mixed at a ratio of 50 parts gas to 1 part oil. This amounts to about 2.6 ounces of oil to each gallon of gas.
All of our handheld two-cycle units can operate on a 40:1 two-cycle oil mix ratio.
Oil mix ratios explained

If your manufacturer recommends a 50:1 fuel/oil mix, it means you need 50 parts of gas to one part two-stroke oil. To mix one gallon of fuel at 50:1, add 2.6 ounces of two-stroke oil to one gallon of gas, as shown in the chart below.

– When purchasing oil for seasonal maintenance, most small engines (such as those on push mowers) have total capacities of less than one quart (32 oz.) and most medium size engines (such as those found on residential snow throwers and riding mowers) have total capacities of less than two quarts (64 oz.).
MTD two-cycle snow throwers use a 50:1 ratio of gasoline to 2-cycle oil, which is one gallon of gasoline to 2.5 oz of 2-cycle oil.
You can do that but I wouldn`t 40 to 1 means 40 parts of gas one part of oil. 50 to1 means 50 parts of gas to 1 part of oil. So the 40 to 1 mixture is more oily and provides better lubrication for your piston rings.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Gas to oil mixture for a RY 26540 – Ryobi 30 Cubic Centimeter Curved Shaft Gas Trimmer
ANSWER : 50:1 don’t use outboard motor mix

Read Full Q/A … : #TB4SC 25CC 4-Cycle Gas Blower

What is the oil and gas mixture ratio for a gas powered leaf blower?
ANSWER : Per http://www.echo-usa.com/faqs/ it 50:1, there is a chart at the site that shows how to mix it.

Read Full Q/A … : #TB4SC 25CC 4-Cycle Gas Blower

What is the gas/oil mixture ration for a Ryobi gas leaf blower?
ANSWER : 40 to 1

Read Full Q/A … : #TB4SC 25CC 4-Cycle Gas Blower

Need gas mix solution – Craftsman 25cc 2-Cycle Gas Blower/Vac
ANSWER : Check age of gas. Cannot be more than 30 days old.

Make sure to use fresh gas w/synthetic 2-cycle oil @ 40:1 ratio
(1 gal.) Gas to 3.2 oz. Oil).Do not use old or stale oil/gas mixture. Always
use the proper oil/gas mix. If you do not, your engine will suffer rapid,
permanent damage.

Read Full Q/A … : #TB4SC 25CC 4-Cycle Gas Blower

Do you mix gas and oil in this trimmer – Ryobi 30 Cubic Centimeter Curved Shaft Gas Trimmer
ANSWER : Yes. Verifythe ratio, either 40:1 or 50:1

Read Full Q/A … : #TB4SC 25CC 4-Cycle Gas Blower

Oil to gas ratio – RTO Echo Pb-755 Backpack Blower In Box
ANSWER : The ratio is 50:1. You can usually by oil in a container that matches the size of your gas can, takes the guess work out of it.

Read Full Q/A … : #TB4SC 25CC 4-Cycle Gas Blower

Does not start
ANSWER : Any 2 cycle oil is good. Use a 40:1 mix to start with if it smokes then cut it back to 32:1 but its better to have more oil then not enough but start with 40:1

Read Full Q/A … : #TB4SC 25CC 4-Cycle Gas Blower

What type of oil goes in the Ryobi 08570 Blower? What is the oil gas mix ratio?
ANSWER : You need 2 stroke motor oil or chain saw oil.Mix it according to the lable to make up 50:1 oil/gas mix.

Read Full Q/A … : #TB4SC 25CC 4-Cycle Gas Blower