Lawn Tractor 48″ Deck, 23 Hp, Model# Yth2348

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

The “Deck Belt” goes around the pulleys right above the blades on the deck and then to a double pulley. The “Drive Belt” on your mower goes from the transmission, around an Idler pulley then over to the double pulley I mentioned before. The Drive belt also plays a role in making the wheels turn.
Figure 58.4 is an illustration of how a V-belt should sit in the pulley groove. The top of the belt should be within 1 16 -inch of the outer surface of the pulley. If the belt top is deeper in the groove, the groove or belt is worn, which can shorten the remaining belt life by as much as 50 per cent.
Figure 58.4 is an illustration of how a V-belt should sit in the pulley groove. The top of the belt should be within 1 16 -inch of the outer surface of the pulley. If the belt top is deeper in the groove, the groove or belt is worn, which can shorten the remaining belt life by as much as 50 per cent.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

ROUTING OF BELT – Mtd Drive Belt 42"
ANSWER : Diagram is on the mowing deckBest regardsCk

Drive belt diagram r 322 t awd – Husqvarna Lawn Tractor 48" Deck, 23 Hp, Model# Yth2348
ANSWER : I have the 2014 R322T AWD with the 48″ mower deck. The replacement belt is 53216597, listed as a 1/2″x82.25″ I used a standard V-Belt 4L820 (1/2″x82″) and its working fine. I’m going to order a Kevlar belt to have on hand 4L820K, oil & heat resistant. FYI, the middle belt is a 4L570K, 1/2″x57″. When replacing the belts, I put some axle grease on the pully shaft and shoot grease in the button head of the rear pully.

Drive belt Have replace drive belt but mower still has no forward movement. Mower is only 2 years old but its already had to have another drive belt installed by the dealer last year. wanted to do it myself but when i install belt theres hardly any tension so mower doesnt move. Checked and rechecked the diagram and is installed correctly. Cant find a tensioner adjustment if it has one.
ANSWER : I don’t have an answer for you, but Do you have a diagram of the Drive Belt?

Drive belt pattern – Husqvarna Lawn Tractor – 54in. Deck, 26 HP, Model# LGT2654
ANSWER : Go on the web to www.milacalawn.com/partsasp they have the factory diagrams for any parts you may need for your Husqvarna tractor and a belt diagram for the deck… Hope this helps…. ;-D

I NEED A DIAGRAM FOR REPLACING THE BELTS ON THE 3 BLADE 46″ DECK. MADE IN 2007
ANSWER : MTD says there are 2 different applications. I hope this one is yours, if not, by using it as a reference; maybe you will be able to do yours. Good luck.

http://support.mtdproducts.com/app/answers/detail/a_id/7/~/how-is-the-46%22-cutting-deck-belt-routed%3F

Cub Cadet 1525 belt diagram
ANSWER : Attached is the blade diagram for correct placement of the deck belt. There is some bleed through from the back page, but you can see the direction of the belt. I have a 1525 mower for the last 11 years, still running and going. Hope this helps!

Mower belt diagram – Craftsman 17.5 hp 42 in. Deck Lawn Tractor – CA Model
ANSWER : You can get a belt diagram from

sears.com

just follow the leads, and have your model number handy, you will need it.

you can also get this from ayp.com

Hi, the belt jhas come off my mower would you have a diagram on how to put it back on ? thanks
ANSWER : This is not the exact operator’s manual for your tractor, but it is close enough.

http://www.managemylife.com/mmh/owner_manuals/14333/HUSQVARNA-Lawn-Tractor-L1001328?brand_name_search=Husqvarna+28957

It will show you the belt routing for your deck.