Pro 952711635 String Trimmer Line for WT3100 and PP325…

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

String trimmer line comes in a range of thicknesses or sizes. For light work, such as trimming grass, 0.065″-0.085″ should be sufficient. For thicker grass and weeds, a line in the 0.085″-0.110″ range will get the job done, and for thicker underbrush, anything thicker than 0.110″ will work.
If the trimmer line is tangling, you may need to cut the grass or weeds in smaller sections from the top down. When cutting particularly tall or thick grass or weeds, the line can get tangled around the grass and cause a jam.
The . 095″ diameter is designed to fit most gas string trimmers and works with all brands including Hyper Tough, Black Max, Snapper, Craftsman, Murray, Poulan Pro, Weed Eater, Husqvarna, Echo, Stihl, Ryobi, Black & Decker and more.
Light: 0.065- to 0.080-inch line is best for trimming grass around the house and whacking down common lawn weeds from around driveways, walkways and fences. Medium: 0.080 to 0.110-inch line is best for homes with larger lawns, or gardens overgrown with weeds that have tough, heavy stems. Heavy: 0.110-inch and above.
Trimmer line does tend to dry out over time and becomes more brittle. Storing it or soaking it in water will help reduce line breakage and make the line more flexible. Be sure to deplete your supply of last year`s line before you purchase new line and begin using it.
If the spool and line on your grass trimmer are fine but your trimmer still isn`t cutting properly, you`ll need to check if the blade on the trimmer`s guard is dull, broken or has come away.
You need to buy a strimmer line based on the amount of cutting required. Using a thin cord for heavy-duty work can hamper your productivity because the line will keep breaking. Many people don`t recognise the difference between light, medium, and heavy growth so there is some trial and error involved.
If your clipper blades are still pulling the hair, you will need to replace your blades or alternatively have them sharpened.
A larger diameter will increase your cutting power and durability against thicker grasses and weeds. A lighter weight should be used on areas where there are a minimum of weeds. However, each trimmer can only handle a certain line diameter, check your owner`s manual for model specific recommendations.
A larger diameter will increase your cutting power and durability against thicker grasses and weeds. A lighter weight should be used on areas where there are a minimum of weeds. However, each trimmer can only handle a certain line diameter, check your owner`s manual for model specific recommendations.
Diameter and thickness

Thinner threads varying from 0.065 to 0.8 inches work well on regularly maintained lawns. They can provide a nice clean trim to softer grass while whacking smaller weed plants. However, you`d ideally want to go for thicker options when working on dense vegetation and thick grass.

It`s simple, round string typically offers the best longevity of any shape. Think about it, . 095 is a measure of the thickest part of a trimmer line. So a .

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

How do you change a head on a poulan pro trimmer
ANSWER : Try putting a wrench on the nut that is above the head to hold it steady. Then try turning the head off being aware that the stud the head spins on to has left handed thread on it.

My poulan pro 42cc is hard to start ,,, its1 year old an i’m not sure if its worn out from alot of use or if its with the ignition
ANSWER : Throw it out and buy a new one this is a throw away scoiety we live in due to cheap *** chinese **** oh yeah go green

Hht 25 will not start
ANSWER : CHECK THE COMPRESSION 90LBS MIN.

How do you wind replacement line to the Poulan Pro String Trimmer?
ANSWER : If it is a duel line trimmer then:Cut two separate pieces of string, about 7 ft. each.Stick the end of
the line in the hole on the inside of spool.Wind clockwise onto spool,
putting the line that is closest to the ground on first.Once you have
winded this piece on, lock the last 4 inches of line through the slits
on spool.Repeat process for second piece of line, locking the last 4
inches in slot opposite the other locked in piece.Put the spool on the
trimmer, feeding the end of lines through either hole on trimmer.Before you push the spool all the way on, pull the strings out of the
locked position.If it is a single line trimmer, just wind a single piece of string clockwise onto spool.Jim

String for a Poulan Pro PPB330
ANSWER : Hello,

Pull your spool off, and look next to the notches on the bottom of the spool. The decimal number is the size of line that you can use. Some spools will have more than one size listed; they can use either size.

Best regards, –W/D–

MY POULAN PRO 6.5 WONT START….nEED TO REPLACE SPARL PLUG BUT DO NOT KNOW ‘right one”..
ANSWER : Take the old plug out, any auto store should be able to match it up.

Gary

Replaceing fuel line in polan 3300 chain saw – Poulan Pro 42CC 2 Cycle Chainsaw, 18"
ANSWER : Hi owjbhend…
Use a piece of wire and insert it into the fuel line, then bend a hook in the end and hook it over the end of the fuel line…lubricate the fuel line with some vaseoline very lightly…about the first one inch of the fuel line and then use your fingers to start the fuel line into the tank, once you have the fuel line in the tank give enough to hook the fuel filter to and so it can be dropped back into the tank.
Below is a drawing of how to route the fuel lines.
Please take time to rate me thumbs up
Please take time to rate me thumbs up

Poulan problems does the trigger need to be engaged to start it
ANSWER : No it does not