Garden
T in forward before it went out completely it was jerking like it wasnt staying in gear .thebelts are new or newish please help
How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
The reasons why mower is not moving forward or reverse is that the battery is dead, or due to clogged fuel line. Additionally, malfunctioning transmission, or a broken drive belt, also a faulty spark plug, even when friction wheel isn`t in contact with the friction plate, or damaged Tires.
12-inch, forward-rotating Bolo™ tines with depth stake for up to 7-inches of tilling depth. Power reverse and the 13-inch ag tires allows for flexible handling around rocks and other obstacles. Troy-Bilt has a limited lifetime transmission warranty on cast iron gear casting and precision cut bronze gears.
This issue may happen if the machine is faulty, the height between the mower deck and the blade is different, or you cut too much grass. While you may find moving in reverse easier to mow the lawn, it may cause various problems related to safety.
Yes you can. Although mowing in reverse is not recommended, there may be certain situations where operators feel they need to mow in reverse.
The Pony lawn tractor is powered by a 15.5 HP Power Built Series (single-cylinder) OHV Briggs and Stratton engine that delivers reliable starting performance for all your mowing needs.
Pony 42 Troy-Bilt Riding Lawn Mower – 13AN77BS023 | Troy-Bilt US.
Best riding mower overall
The Troy-Bilt Super Bronco XP riding mower is an excellent choice for a variety of lawns. It`s built with a 24HP Kohler engine and a 54-inch cutting deck to let you handle inclines and rough terrain or haul tools, mulch, and potting soil around your property.
Can you pull a self-propelled lawn mower backwards? Yes, you won`t cause any damage to the mower by pulling it backwards.
Mow Forward
Most importantly, walking backward could be a safety risk. If you trip and fall back for whatever reason, you may pull the mower onto yourself and get hurt. That`s why you should always mow in a forward direction unless you really need to maneuver away from something.
If your lawn mower turns on but won`t move, there could be a number of potential causes. The most common issues include a broken or damaged belt, a clogged discharge chute, a broken or damaged drive cable, or a damaged or clogged transmission.
Failure of any mechanical component, a broken hose, or clogged filter will cause tractor hydrostatic transmission problems. But the most common issue will be the oil itself. In the transmission section of your operator`s manual, you`ll find a section that covers oil viscosity.
Worn or broken blade drive belt – If the riding mower blades are not spinning, the blade drive belt may be worn or broken and unable to engage the blades. If the belt is intact, inspect it to see if it`s loose or slipping on the pulleys then replace it with a new one if necessary.
Failure of any mechanical component, a broken hose, or clogged filter will cause tractor hydrostatic transmission problems. But the most common issue will be the oil itself. In the transmission section of your operator`s manual, you`ll find a section that covers oil viscosity.
Worn or broken blade drive belt – If the riding mower blades are not spinning, the blade drive belt may be worn or broken and unable to engage the blades. If the belt is intact, inspect it to see if it`s loose or slipping on the pulleys then replace it with a new one if necessary.
Check the drive belt that is located just above the mower deck. Follow the belt as it wraps around the deck and to pulleys under the engine and the rear tires. Make sure the belt is secured to the pulleys, because if it is not, then the belt (and thus the mower) will not move. If the belt looks broken, replace it.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
Pony wont start. i have replaced gas, cleaned carb, replaced plug. it will turn over but wont start. getting gas and fire.
ANSWER : Look to see if there is any trash under the seat.there is a safety device and if it is not making contact it will not start.try to put the mower in forward and engage the blades,while not running.push on the mower a few times then try to start it again,
Read Full Q/A … : Garden
What oil used in transmission – Troy-Bilt Pony Garden Tiller
ANSWER : Troy-Bilt says that if adding a few ounces only, use GL-4 or GL-5 gear oil. If refilling an empty transmission, use GL-4, with a viscosity of SAE 85W-140 or SAE 140.Best regards, –W/D–
Read Full Q/A … : Garden
I have a troy bilt pony and the drive belt to engage to blades keeps coming off. I have replaced the belt and the pully what else could it be?
ANSWER : Well i would take a long look at the spring which holds the tension pulley in place. if it is weak, or not connected correctly, there will be inadequate tension and the belt can come off. I would also take a look at whatever fasteners keep the deck in place as if it is not kept to the rear, there again will be too much play in the deck belt.
Read Full Q/A … : Garden
How to start a Troy Bilt Tiller – Troy Bilt Pony 6.5 Hp Rear Tine Tiller
ANSWER : Make sure there is fuel and oil in the engine. There should either be a choke lever/setting or a primer bulb. Push the primer bulb, if there is one, or choke the engine. Make sure it is in neutral, and pull the starter. Should be all there is to it. If there is other info that is causing the machine not to start, please tell model number and what you have done in trying to start.
Read Full Q/A … : Garden
Transmission small spring fell off – does not move
ANSWER : Get replacement spring and reinstall
Read Full Q/A … : Garden
Need help in finding out what kind of engine and hp a troy-bilt tiller has with the serial # 31290 and model # HH60 105079E (maybe an early 1970)
ANSWER : From the #HH60 I think it is a 6 horse power,tecumse engin whith a horizontal crank shaft.
Read Full Q/A … : Garden
Troy tiller won't crank – Troy-Bilt Pony Garden Tiller
ANSWER : Is it electric start or manual pull?? remove pulg and see if it cranks over. Could be mouse nest under recoil cover or under flywheel, could be rusted to the magnets. need more info. Oh yea make sure belts are not holding you back remove them or make sure they are loose.
Read Full Q/A … : Garden
Troy-bilt tiller The tires will not move freely when I attempt to move the tiller. The tiller will rotate the tires when engaged and move forward. Also, I am able to reverse the tiller and the tires will rotate to move the tiller backwards. When the tiller is shut off the tires will not move.
ANSWER : The only way to roll around is to remove the pins on the axle and slide the wheels in and replace the pins. If this has never been done sometime its rather hard to do. Hope this will help
Read Full Q/A … : Garden
