16″ Chainsaw Bar Chain Saw 018 025 Ms 180 250
Stihl chainsew 180
Experienced gardeners share their insights in answering this question :
Replace the in-tank fuel filter. Always the easy thing first.
How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
The carburetor might be clogged. A clogged carburetor is often caused by leaving fuel in the chainsaw for a long period of time. Over time, some of the ingredients in the fuel may evaporate, leaving behind a thicker, stickier substance. This sticky fuel can clog up the carburetor and cause the chainsaw engine to stall.
The fuel line may be clogged from stale fuel deposits, more reasons to cause your chainsaw to cut out when applying throttle. If a fuel line is cracked, it will leak gasoline and draw air from outside into the fuel line. If the line is leaking fuel, it needs to be replaced.
My chain saw starts and then dies what is wrong? This could be a number of things and is most likely fuel or storage related. Over a short period of time, fuel will become stale. If the unit is stored with stale gasoline, the system will become clogged or restricted.
If your chainsaw bounces around when making contact with the wood, it means that that chains teeth are not grabbing on and ripping through the wood. A sharp chain will cut in a uniform and straight line.
If your chainsaw shuts down when turned sideways, it is usually because the fuel filter is held away from the fuel, as the position of the chainsaw has changed. The fuel filter must be able to stay in the fuel as the position of the chainsaw is changed.
The two most common reasons a chainsaw won`t idle are a blocked air filter and an idle screw out of adjustment. Other possible causes include: Dirty Air Filter. Idle Screw out of Adjustment.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
My stihl keep cutting out if fuel not getting through what can i do
ANSWER : Replace the in-tank fuel filter. Always the easy thing first.
Read Full Q/A … : 16″ Chainsaw Bar Chain Saw 018 025 Ms 180 250
Stihl saw cuts out when machine is tilted forward on ts410 anybody else have this problem
ANSWER : Fuel pick up will be your problem. Buy new fuel filter and fuel line from in tank to carby. Most likely a split in the fuel line in-tank
Read Full Q/A … : 16″ Chainsaw Bar Chain Saw 018 025 Ms 180 250
Need fuel diagram – Stihl Fs36 Line Trimmer Gas Tank
ANSWER : Http://www.mediafire.com/view/yleara73l4w78xa
Read Full Q/A … : 16″ Chainsaw Bar Chain Saw 018 025 Ms 180 250
Fuel coming out of venthole on the tank
ANSWER : Since you forgot to mention what saw you actually have, it’s hard to answer but does it do it only after you have pushed the primmer bulb ???
Read Full Q/A … : 16″ Chainsaw Bar Chain Saw 018 025 Ms 180 250
What causes 021 stihl saw to cut off?
ANSWER : Your chainsaw is running-lean, take off top cover. You should see the air filter. Under The plastic air filter housing is too nuts, 12mm socket is Wot you need next, you need to check these too nuts are tite, these nuts hold the carby to the Intake, all air that goes into the saw is mixed by the carby with fuel. Your saw is running lean. So if those bolts are tite you’ll need to check the gasket between the carby and the block……. There are others possibilities but these too are your most likely.
Read Full Q/A … : 16″ Chainsaw Bar Chain Saw 018 025 Ms 180 250
Fuel is not getting through to the carb,it runs fo…
ANSWER : Hi, it sounds to me that you may have a leak / or perished fuel pipe in your saw…thus only being able to start then stop…
Read Full Q/A … : 16″ Chainsaw Bar Chain Saw 018 025 Ms 180 250
Need parts list for Stihl FS 75 trimmer – Oregon Scientific Complete Carburetor for Stihl 4122 Brush Cutter and 4226HS Hedge Trimmer
ANSWER : Look at your local lawn and garden place some times they have extra parts that you can use for your trimmer. Or call the company them selfs and ask them if they have parts.
Read Full Q/A … : 16″ Chainsaw Bar Chain Saw 018 025 Ms 180 250
Saw has new vent wont run after hot unless i loosen cap
ANSWER : The vent is not working properly or was installed incorrectly, so there is no negative air entering the tank to take up the space of the fuel leaving it for the combustion chamber. Perhaps your tank cap has a vent as well that isn’t working.
Read Full Q/A … : 16″ Chainsaw Bar Chain Saw 018 025 Ms 180 250
