Honda

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

If you are trying to use your soap dispenser and the trigger stays depressed and doesn`t let you pump the dispenser the spring in the pump mechanism may be jammed. You can unscrew the pump and try to get to the spring. If you cannot get to the spring you will most likely need to replace the pump.
If you are experiencing this issue, the first thing to check is the sensor area. The sensor area might be obstructed by soap or sanitizer residue. Clean the area, removing any visible residue, and test the unit. Pro Tip: Do not use abrasive cleaners on the dispenser or cartridge.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

What kind of soap do I need to use? – Honda Black Max 2600 PSI Pressure Washer
ANSWER : I suppose that would be dependent upon what you would be cleaning eh?If moss on white siding use a bleach solutionOtherwise for general cleaning I prefer “simple green” — you may cut it up to ten times with water….Best regardsCk

Read Full Q/A … : Honda

Honda powwer boss 3000-whenyoupull the handale to spray it kills the engine
ANSWER : Sounds like the unloader (regulator). Try removing the nozzle, the pull the trigger with the engine running. If motor is still running then it could be the Unloader malfunctioning. If you require a new one try a bypass system for the unloader. The bypass will help save the life of the unloader.

Read Full Q/A … : Honda

Kranzle electric washer will not suck up soap
ANSWER : Hi, if it has a chemical injector on the machine then the pressure at the lance will have to be lowered for it to pull in soap. it works on a similar principle to how carburetors on cars pull in fuel, bernouli principle. high pressure at one side of an orifice going to low pressure at the other side which causes a negative pressure ( vacuum) which should pull in the soap. there should be a non return valve at the orifice (hole) which prevents the water back feeding into the soap container, it is quite common for this valve to get stuck, it is just a ball, spring and o ring , and the ball sticks to the o ring. if it is this system then take the soap pick up pipe off the injector and just push the ball off it’s seat with a bit of wire.If it is a high pressure soap system then that is different, but they usually work with an injector in my experience.try taking the high pressure hose off the front off the machine and running it, if it has an injector on it it should pull in plenty off soap.hope this helps ,andy

Read Full Q/A … : Honda

Need help in getting Honda engine on NorthStar pressure washer to run.
ANSWER : Could be low water pressure I have found.Also, I purchased a can of “stuff” at Lowes today which allows you to circulate a liquid substance which lubricates the pressure pump….the pump could be frozen up…I have a rotating nozzle which I bought…and it had frozen up…this stuff works

Read Full Q/A … : Honda

My Honda 2600 psi power washer will not pull to start. It was running great then I allowed the neighbor to borrow it. He ran the washer till it was out of gas and proceeded to refuel and at this point it would no longer start. The pull cord is out about 4-6 inches out and I am concerned about taking the casing off myself.

Fearing that it may throw more off on the unit. If i take the casing off are there any spring loaded parts that will dismount?

What should I do? Spark Plug? Turn wrenches?

Please let me know

ANSWER : You should be fine to take the recoil off, there shouldn’t be anything that shoots out at you. You might want to check the oil level on the engine, many of the Honda engines won’t start unless there is enough oil in them. If your oil level is fine, check to make sure that your motor is getting spark.

Read Full Q/A … : Honda

Water coming out of fitting on machine at the pressure hose connection.will not seal
ANSWER : Replace hose gasket

Read Full Q/A … : Honda

My Honda pressure washer is leaking out of the thermal relief valve and I am looking for a part,I also do not have the manual. The model number is WGC 3030 and it is 3.0 gpm 9.0HP. The number on the thermal valve is 33120004,where can I find a part?
ANSWER : Does the thermal valve just screw into the pump head, if so what size thread is it? I have 1/4, 3/8, 1/2 in stock.

Read Full Q/A … : Honda

Honda gcv160 wont dispence detergent – Craftsman 2600 PSI Honda Powered Pressure Washer
ANSWER : It will not draw soap while using pressure take out the nozzle or use the large black nozzle

Read Full Q/A … : Honda