Craftsman

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

Usually there are two belts. One goes around two pulleys, a front pulley under the motor and one on the mower deck.
A: Your mower has two belts. Both play a role in making the blades turn. The “Deck Belt” goes around the pulleys right above the blades on the deck and then to a double pulley. The “Drive Belt” on your mower goes from the transmission, around an Idler pulley then over to the double pulley I mentioned before.
Usually there are two belts. One goes around two pulleys, a front pulley under the motor and one on the mower deck.
Usually there are two belts. One goes around two pulleys, a front pulley under the motor and one on the mower deck.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Drive belt Have replace drive belt but mower still has no forward movement. Mower is only 2 years old but its already had to have another drive belt installed by the dealer last year. wanted to do it myself but when i install belt theres hardly any tension so mower doesnt move. Checked and rechecked the diagram and is installed correctly. Cant find a tensioner adjustment if it has one.
ANSWER : I don’t have an answer for you, but Do you have a diagram of the Drive Belt?

Read Full Q/A … : Craftsman

How to change drive belt – Huskee Tractor Replacement Riding Lawn Mower 42" Deck Mulching Kit fits Huske
ANSWER : Step 1 – Loosen tension and remove belt. Locate the adjustment fastener and loosen it. …
Step 2 – Inspect drive and drive pulleys. Check the drive and pulley wheels. …
Step 3 – Select correct replacement belt. …
Step 4 – Install V-belt. …
Step 5 – Correctly tension new belt. …
Step 6 – Start the engine.

Read Full Q/A … : Craftsman

Replacing drive and auger belts on a John Deere 1032 snowthrower
ANSWER : You don’t need to remove the any lever linkages but you will need to remove some of the pulleys.If you can give an exact model number of the tractor it would help.

Read Full Q/A … : Craftsman

How to replace belt on 1992 toyota carolla station wagon
ANSWER : Http://www.2carpros.com/diagrams/toyota/corolla/1992 click on link.

Read Full Q/A … : Craftsman

Diagram for belt replacement on 1988 Toyota Tercel
ANSWER : Fig. 1: Correct timing mark placement on 3E and 3E-E enginesHope this helps; also keep in mind that your
feedback is important and I`ll appreciate your time and consideration if
you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Read Full Q/A … : Craftsman

My mower blades disengage when operating.
ANSWER : Not sure of your question, but if you mean, they start when you flip the switch and then disengage but the switch stays up.. you need to check two things. (1) The out put of your alternator, read the battery with a volt meter before you start it, then start up the engine and read the voltage again should be a higher reading with the engine running. 12.4 vdc with the engine off – 13.7 vdc with it running. (just an example). Next will be your seat switch.There is a switch under the seat if you are not sitting in the seat the blades should turn off. so the switch could be out of its socket, or broken.

Read Full Q/A … : Craftsman

Need a diagram for craftsman 44″ riding mower drive belt. Mine threw belt and cannot locate original manual.
ANSWER : If you can find the model number of your mower, you should be able to find your manual here. I hope this helps.http://www.searspartsdirect.com/partsdirect/index.action

Read Full Q/A … : Craftsman

New drive belt immediately burned up after replacement
ANSWER : Make sure blades move ok. Check bad spindle bearings too

Read Full Q/A … : Craftsman