Husqvarna
Experienced gardeners share their insights in answering this question :
If it attempts to start it could be the diaphram, but it could also be in your carb adjustment. let me know exactly what it does.
How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
Remove the spark plug and inspect if it is dirty, cracked, eroded, or damaged. There may also be a heavy carbon buildup or a burned-up electrode. If the spark plug has one or more of these issues, replace it with a new one.
If your chainsaw still starts and then stops working, check the air filter. Clean or replace the air filter if it is dirty or damaged. Another reason that your chainsaw starts and then stops working could be that the spark arrestor is dirty or clogged. If this is the case, clean it with a wire brush.
Why Won`t My Car Start? When your engine cranks but won`t start or run, it could mean your engine is having trouble producing a spark, getting fuel, or creating compression. The most common causes are problems in the ignition (for example, a bad ignition coil) or fuel system (for example, a clogged fuel filter).
2 stroke has fuel and spark but won`t start
You`ve confirmed that the gas is getting to the carb, and the spark plug is properly igniting, but your 2 stroke dirt bike won`t start. The most common causes are a dirty carb or low compression.
If it is difficult to start the ride-on mower, the most common reasons include: Old fuel; make sure to use fresh fuel, especially after winter storage. Spark plugs might be dirty or damaged. How to examine and replace a spark plug on your ride-on mower.
If the spark plug produces a spark and you are still having difficulties starting your chainsaw, it`s time to check the gap. The spark plug gap is an air gap between the ground electrode and the center electrode. If the gap is too small, the spark struggles to ignite the fuel and air mixture.
If your chainsaw still starts and then stops working, check the air filter. Clean or replace the air filter if it is dirty or damaged. Another reason that your chainsaw starts and then stops working could be that the spark arrestor is dirty or clogged. If this is the case, clean it with a wire brush.
If your Briggs & Stratton engine has a spark but won`t run, then it is most likely a problem with the gas or air intake in the engine. The spark on the spark plug ignites the gas in the piston, but if the air filter is clogged or the gas can`t flow, then the engine won`t start.
The fuel line may be clogged from stale fuel deposits, more reasons to cause your chainsaw to cut out when applying throttle. If a fuel line is cracked, it will leak gasoline and draw air from outside into the fuel line. If the line is leaking fuel, it needs to be replaced.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
<!– from fixya rte –>Spark plug gap setting poulan pro 033. – Poulan Pro Prod/Poulan Weedeater Poulan Pro PP5020AV 20" Gas Chain Saw
ANSWER : .025″ plug gap
Read Full Q/A … : Husqvarna
SAW WONT START IT HAS FIRE TO THE PLUG AND IT WONT START WHEN I SHOOT A LITTLE ETHER IN IT
ANSWER : If the engine has good compression, and good spark, it should at least ‘pop’ several times. Check the flywheel ‘key’ as it may have sheared causing the ignition to be out of time. Hope this helps!
Read Full Q/A … : Husqvarna
What does a spark plug gap at – Craftsman sears 18" Chain Saw Chain ( Model 35084 )
ANSWER : Hi, your spark plug gap should be the thickness of a hacksaw blade. use a hacksaw blade. sheers
Read Full Q/A … : Husqvarna
Spark plug gap on husky 350 chainsaw
ANSWER : The plug should gap at 0.5 mm or .020″ and be sure to use the proper resister plug. Do not cross reference a plug.
Read Full Q/A … : Husqvarna
What is the proper gap for a Champion Spark plug CJ7Y used on a Poulan Wood Shark Model 1950
ANSWER : .025
Read Full Q/A … : Husqvarna
I need a spark plug gap
ANSWER : 0.5mm or .02″
Read Full Q/A … : Husqvarna
I need the spark plug gap for an Ariens ST624E. the spark plug = 21533500
ANSWER : The recommended setting is .030″
Read Full Q/A … : Husqvarna
Free stihl manuals
ANSWER : .02″ 0.5mm
Read Full Q/A … : Husqvarna
