Ariens

Experienced gardeners share their insights in answering this question :
You may need to replace the fuel filter, follow the fuel line from the fuel tank until you see a plastic housing stuck in between two ends of the hose that should be it. try NAPA or other auto parts store also the place where you bought it.

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

A Dirty Carburetor Can Cause a Lawnmower To Start Then Die

By far, the most common issue that causes a stalled motor is a dirty carburetor. The carburetor on your engine is the thing that draws in air and mixes it with the fuel. Contrary to what the movies might make you think, gasoline itself is not very flammable.

Loose, Dirty or Disconnected Spark Plug in Your Lawn Mower: Check it out, clean off debris, re-connect and tighten. Dirty Air Filter: Clean or replace. Fuel Not Reaching the Engine: Tap the side of the carburetor to help the flow of gas. If this doesn`t work, you might need a new fuel filter.
If your lawn mower starts, runs for a while, then dies, check the ignition coil, gas cap, and spark plug. One or more of these parts could be causing your problem. Follow our repair and symptom guide to help you fix this.
The most common cause of a mower that runs for thirty minutes and then dies is a faulty armature. A faulty gas cap is the second most likely cause.
Use Carburetor Cleaner

Fortunately, you can generally do this without even taking the carburetor out of the engine. Start by purchasing some commercial lawnmower carburetor cleanerOpens a new window, which comes in a simple spray can and will make it easy to clean the inside and outside of the carb.

The spark plugs are worn or damaged

If you find that your lawnmower keeps dying, or keeps stalling while cutting grass, then inspect the spark plugs. Look for signs of damage or wear. Something as simple as a cracked porcelain insulator can mean an electrode has been damaged or burned away.

An airlock is one of the common causes why your mower won`t start after running out of fuel. An Airlock occurs when air replaces fuel in the fuel lines. As you refill your fuel tank, you could push the air towards your mower`s carburetor, which keeps the new fuel from reaching the engine.
A dirty carburetor is one of the most common causes for a lawn mower not being able to start after sitting unused for months or years at a time.
Condensation inside the gas tank is one culprit, but moisture can also enter the system through a loose or ill fitting gas cap. The best solution is to drain the mower`s gas tank and refill it with fresh gasoline. A clogged fuel filter can also cause a mower engine to die.
If the riding mower makes a heavy clicking or a rapid clattering sound when the key is turned to the start position, there is a problem with the battery or a part of the starting circuit. The clicking noise comes from a part called the starter solenoid.
Other things that could cause this issue are bad fuel, weak/colapsed/kinked fuel line, faulty spark plug, faulty ignition/coil, oil over full, clogged air filter, plugged/dirty carburetor, worn engine parts internal rings/valves/etc.
Check the Fuel Filter

To start, tap the side of the carburetor to help the flow of gas. If that doesn`t work, you might have a clogged filter. Not all lawn mowers have a fuel filter, but for the ones that do, it`s usually located in the fuel line or the fuel tank.

One way to remove the gas is to use either a hose to siphon off the gas or a baster/pipette to remove the gas from the lawn mower gas tank to a gas can. Alternatively, the fuel line connecting the fuel tank to the carburetor can be disconnected at the carburetor and fuel emptied into a gas can.
Other things that could cause this issue are bad fuel, weak/colapsed/kinked fuel line, faulty spark plug, faulty ignition/coil, oil over full, clogged air filter, plugged/dirty carburetor, worn engine parts internal rings/valves/etc.
Other things that could cause this issue are bad fuel, weak/colapsed/kinked fuel line, faulty spark plug, faulty ignition/coil, oil over full, clogged air filter, plugged/dirty carburetor, worn engine parts internal rings/valves/etc.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Wont stay running – Mtd 22" Yard Machine Push Mower
ANSWER : Under neath the carby is a single brass bolt, undo it

that one bolt is a multi jet, find four holes use a fine pin and carby cleaner ,hint one is at the top were the thread starts , one is in the inside center and two in the sides
put it back in and prim and start, hope it helps

Read Full Q/A … : Ariens

Wont stay running
ANSWER : Bad fuel or check for water in your fuel! Clean your carb and float bowl. Empty gas
into a clear container, if there is two levels of liquid one of them is
water. Of course make sure you have good spark plug.

Read Full Q/A … : Ariens

The lawnmower won t start after pulling the start up cord . changed the spark plug it still won t start
ANSWER : Try a touch of starting fluid right into the carburator by taking the air filter off. If it then starts but wont run or stay running, the reservoir below the carb should be removed to clean at and the pinhole in the intake tube above the bowl nut. This is the most common problem with lawnmower start problems, the pinhole can be unplugged with one wire from a wire brush. Be careful with the gas, at least pinch off the gas hose with a vise grips while removing the carb bowl.. Never use a droplight around gasoline.

Read Full Q/A … : Ariens

Poulan pro chain wont stay running – Poulan Pro Chain Saw 46cc 20"
ANSWER : Keep “poulan” ha ha

Read Full Q/A … : Ariens

Carb problems wont stay running unless i unplug and plug in the anti diesel switch the plug on the fuel bowl
ANSWER : Check and see if all your carb jets or clean sound like some dirt got into one

Read Full Q/A … : Ariens

Carburtor problems with toro tecumseh h35-45598R 5231B ser# it wont stay running
ANSWER : Here is diagram.

Read Full Q/A … : Ariens

Where is the primer ball
ANSWER : It may not have a primer ball. If it does, it would be attached to the carberator. If it starts, but won’t stay running, that could mean your carberator needs to be cleaned/serviced.

Read Full Q/A … : Ariens

Why gas toro weedeater wont stay running – Ryobi 30 Cubic Centimeter Curved Shaft Gas Trimmer
ANSWER : The diaphragm in the carburettor is worn out.

Read Full Q/A … : Ariens