Toro
I need a part # for a transmission that will fit a Toro Mod:20332 T order a transmission according to the Mod:20332 transmission Part # 121-9178 would work, but thats not the case. obviously I ordered the part cause this one has pin holes at the outer ends of the drive shaft. one i need is kind of flat at the ends of the drive shift NO HOLES nor PINS
Experienced gardeners share their insights in answering this question :
It’s a superceeded part. new trans has no holes.
How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
Manufacturing for Toro 20332 Recycler Lawn Mower began in 2009 and was made through 2011.
Mowers mostly use two types of transmissions – gear driven and hydro-static. The gear-driven type is very basic, the common manual lawn tractor transmission (the manual type usually called a gearbox) will have 5 forward gears and one reverse.
SKU: 20332. This Toro 22″ Personal Pace Recycler lawnmower gives you powerful performance and lightweight agility. Powered by a 7.25 ft-lb Gross Torque Briggs & Stratton® EXi 163cc w/Ready Start® – no need to prime or choke.
Briggs & Stratton® EXI Engine
Featuring the lightweight 7.25 lbs gross torque, 163cc overhead valve engine featuring No Oil Changes ever.
In contrast, the self-propelled mowers include a transmission to power the wheels and get the mower moving.
Overview. Toro 21 in (53 cm) heavy duty commercial walk behind lawn mower with dual action single lever control system, blade brake clutch, 3 speed transmission, self propel rear wheel drive, commercial grade Kawasaki BBC ZS FJ180V engine.
Easily cut your yard with the Toro Recycler® 22 in. High-Wheel Front Wheel Drive Variable Speed Self-Propelled Gas Lawn Mower with a Honda® engine (CARB compliant). This tough engine delivers 160cc for powerful performance. Able to mow and mulch, this lawn mower has high-quality smart features and proven dependability.
Add to Cart. Manufacturing for Toro 20334 Recycler Lawn Mower began in 2009 and was made through 2011.
When it starts with a 2, the second digit is the year. When it starts with a 3, the 2nd and 3rd digits are the year. 24xxxxxx for example would be a 2004 model. 316xxxxx in your case is 2016.
The model number on your Toro equipment can be found on the model and serial tag, located in one of several places depending on your equipment type. Some products, such as riding mowers, have more than one tag-one for the rider or traction unit, and another for the attachment.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
Trying to replace the pull cord , can’t get last housing off to get to coile up old cord , the shaft has a nut on the end that the auger screws into but i cannot get that piece off as there is no where to put a wrench to stop the turning of the engine shaft so i can torque the nut in the other direction to get it off , what do i do to get this pull cord replaced?
ANSWER : Use an impact wrench it will hit the nut so fast it will loosen it befroe the engine car turn over
Read Full Q/A … : Toro
Model #2166 – pto belt 954-3055A replaces 754-3055A …
this belt literally falls off when blades ren’t engaged. Any way to adjust tension? A $47 belt ought to fit!
Book says its 5/8 x 112.4 Lg …. Loppy n Sloppy!
this belt literally falls off when blades ren’t engaged. Any way to adjust tension? A $47 belt ought to fit!
Book says its 5/8 x 112.4 Lg …. Loppy n Sloppy!
ANSWER :
Read Full Q/A … : Toro
Does anyone know where I can get a replacment impeller for a 2008 model Sunterra 2000 gph pump ? The cover comes off and looks replaceable. I have a warranty replacment 2009 model and the cover of it is not removeable so I dont think I can replace on the newer model.
ANSWER : If you find a replacement 2000 Impeller for your 2008 sunterra pump, let me know! I called the company who promptly told me they don’t sell component parts for any of their pumps larger than 1250. They very matter-of-factly told me to go buy a new pump.
[email protected]
[email protected]
Read Full Q/A … : Toro
How do you remove the ignition coil? I can remove the bolt quite easily, but how do you remove the post which secures the other end of the coil?
ANSWER : Would of been very helpful if you would of mentioned the engine you are working on… model/serial numbers would of been even better !!!
Read Full Q/A … : Toro
Transmission on my crafsman tractor will not shift. I pulled the transaxle out and disassembled and can not get the shift forks to move freely. All gears look OK but teh shift fork will not move witho
ANSWER : Replace the outer needle bearings.
Read Full Q/A … : Toro
Replaceing mower deck belt on 20 hp 42 mower model no 917275660. Got the belt on. How do I get the cluch spring back on.
ANSWER : Are you refering to the spring attached to the end of the cable that runs up to the lever on the dash to engage the blades? All you needed to disconnect was that cable on top of the idler arm that’s held in place by a ‘hairpin’ and the left pulley cover to put the belt on.
Read Full Q/A … : Toro
I need a belt diagram for a cub cadet lawn mower, model number 1515
ANSWER : Download this manual belowhttp://www.manuals-depot.com/product.php?cPath=31_32_42&products_id=279
Read Full Q/A … : Toro
Troy Bilt Lawn Mower pull Cord broken
ANSWER : There should be four bolts holding the cover on that houses the pull cord assembly take the bolts out look inside you should see the rest of the broken cord at the other end there is a spool that the cord rolls up in to pull the cord until it stops the other end of the cord is a not in the cord pull on the knot the broken peice should come out turn the spool 2 times in the direction that is against the pressre while holding the spool in place feed the new cord in through the whole that you pulled the broken cord out of then tie the cord in a knot wind the rest of the cord up then feed the other end of the cord through the new pull handle tie the cord in a knot put the housing back on
Read Full Q/A … : Toro
