Garden

This is the electric 16″ chain – I have tried to tighten the chain and it comes loose really fast – then it does not cut

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

The two most common reasons a chainsaw won`t idle are a blocked air filter and an idle screw out of adjustment. Other possible causes include: Dirty Air Filter. Idle Screw out of Adjustment.
Today, McCulloch offers a complete line of garden products: powerful chainsaws, sturdy trimmers, lawnmowers, garden tractors and hedge trimmers.
If your chainsaw still starts and then stops working, check the air filter. Clean or replace the air filter if it is dirty or damaged. Another reason that your chainsaw starts and then stops working could be that the spark arrestor is dirty or clogged. If this is the case, clean it with a wire brush.
Are chainsaw chains interchangeable? Several manufacturers produce chainsaw chains, and the different brands are not interchangeable with all models. If you replace your chain with another brand, you must know the exact gauge, length, and pitch of the old chain.
Since then McCulloch has been a brand within the Husqvarna group. The knowledge and experience gained from the Husqvarna group is very evident in this quality range which also offers excellent value for money. Powered by McCulloch range.
Black and Decker bought McCulloch on 4 October 1974, and sold the company to a private group in November 1984. In January 1999, the company filed for Chapter 11 bankruptcy and sold its European division to Husqvarna AB.
A dirty carburetor, bad gasoline and low-quality two-stroke oil that creates deposits all contribute to chainsaw starting problems.
If the filter becomes clogged, not enough fuel will reach the engine for it to run properly. Because your chainsaw will idle, but dies when it is revved up to full power, it means that the filter is only partially clogged; it will allow enough fuel to the engine to run on idle, but not enough to sustain full throttle.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Will only run on choke – McCulloch 16 Inch Gas Chain Saw MCC1635AK
ANSWER : Its running too lean, start with easy stuff first, replace the fuel filter in the tank, check the condition of the fuel hose up to the carb, any signs of damage or leak, then replace.

Read Full Q/A … : Garden

Dont know what type off oil to put in the bar and chain tank on the chainsaw
ANSWER : Hi and welcome to FixYa, I am Kelly

All Bar oils are SAE 30W non-detergent oil. Go down to the local auto parts supply and buy the cheapest SAE 30W you can find…. SAE 30W is SAE 30W regardless of what brand is on it and for bar oil it is not an issue.

Thanks for choosing FixYa,
Kelly

Read Full Q/A … : Garden

<!– from fixya rte –>How full should I fill the chain oiler – McCulloch 16 Inch Gas Chain Saw MCC1635AK
ANSWER : Fill it all the way. I fill mine every time I put fuel in the saw to keep from running out and burning up the chain.

Read Full Q/A … : Garden

I’m not getting gas to the carburetor. What could be the problem.
ANSWER : Start by replacing the fuel filter in the fuel tank, check the hose up to the carb for signs of leaking or cracks.

Read Full Q/A … : Garden

I have a McCulloch Chain saw model 3516. The male threads to the chain oil resevoir is cracked. How do I fix it?
ANSWER : A auto parts store will have a oil resistant epoxy

Read Full Q/A … : Garden

Just purchased a McCulloch 250CXL but the operating manual provided does not contain english instructions.Received machine today 3rd Nov
ANSWER : Goto http://lawnandgarden.manualsonline.com/manuals/mfg/mcculloch/mcculloch_chainsaw_product_list.html

Read Full Q/A … : Garden

Chainsaw comes off what have I done wrong? – McCulloch 16 Inch Gas Chain Saw MCC1635AK
ANSWER : The first thing is check to make sure your chain isn’t twisted and the bar isn’t pinched. Make sure the bar and sprocket line up with each other. And are you tightened down your nuts enough

Read Full Q/A … : Garden

I have a mac 3516 with a weak spark.I am looking for the gap spec
for the pickup coil.
ANSWER : The gap should be 0.5mm

Read Full Q/A … : Garden