Pony Garden Tiller
Experienced gardeners share their insights in answering this question :
Hi, On the stubborn ones I use large wood screws in as many places as possible to lift it out. (some times as many as 6 screws.) You put them through the center part of the facing. You may have to use a smaller screw to make a hole for the bigger screws. Then screw them all evenly to lift it out.
If that does not work I drill holes in it until I can break the old seal into pieces and then pry it out with a screwdriver. Some of them can really be stubborn. The key is to be careful if you use a drill because if you don’t get all of the drill shavings out it will cut the new seal you installed.
Hopefully you do not have the kind of seal that is installed on the inside of the gear case where the case has to be separated to remove the seal. I have not seen one of those since the old Wheel Horse Tillers. Sorry to hear of the struggle your having but I think with persistence you will get it out.
How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
The product`s model number is essential to finding correct genuine factory replacement part numbers for your Troy-Bilt® outdoor power equipment. The Model number is eleven characters long and is printed on the left side of the Product Identification Label. Characters can include numbers, letters or hyphens.
For full replacement use SAE 140 or SAE 85W-140 gear oil with an API rating of GL-4 only. We have also found that 80W-90 oil with an API rating of GL-1 is acceptable for both partial and full replacement of tiller gear oils.
What year was my equipment built? The 5th character of our 11 character product serial numbers will indicate the last number of the year that it was manufactured. Since 5th character in the example is a 4, the year of manufacture would be a year ending in 4.
When the “blunt” edge width measures 1/4″ to 3/8″, a new set is probably required. If the tines become so worn that they are pointed, the tiller will not perform acceptably–you`ll be aerating instead of tilling! For the most part, tines need to be replaced as a set (or kit)–not individually.
One of the most important things you can do for your tiller is to keep it clean. Wash the tiller, particularly the tines and housing, after each use (be careful not to spray water on a hot engine!). For continued effectiveness, you will need to replace the tines when they become worn down.
The Pony lawn tractor is powered by a 15.5 HP Power Built Series (single-cylinder) OHV Briggs and Stratton engine that delivers reliable starting performance for all your mowing needs.
Troy-Bilt® is headquartered in Valley City, Ohio, and our reliable equipment includes select products that are designed, built and tested right here in the U.S. – from Ohio and Mississippi to Tennessee and Arizona.
Capacity: 14 pints. Fill oil tube to overflowing.
Technical Specifications. Fuel Tank Capacity: 1.36 gal. Engine Oil Capacity: 1.3 qts.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
Tines wont engage on my troy built pony. How can i fix it?
The lever for the tines moves easily? Is there an adjustment on the linkage that may need tightening?
Tines wont turn
Without really knowing what is broken it will be tough to give a firm idea of the cost. However, you can head over to www.partstree.com. They have a great detailed parts break down and costs associated with it. Looked up your part numer and can find at this link: http://www.partstree.com/parts/?lc=mtd&mn=210-031-000+%281990%29
How to get owner's manual – Troy-Bilt Pony Garden Tiller
Most of the time u can go to the place of sale and get one or just call
the company and get or go one line with tyap code and modal number a
and see if that helps.
Transmission small spring fell off – does not move
Get replacement spring and reinstall
I WAS JUST GIVEN A TROY BILT 5 HP REAR TINE PONY ROTA TILLER. THE DECAL WITH THE MODEL NUMBER ETC. ON THE TINE CASING IS UNREADABLE. DO YOU HAVE ANY IDEA WHAT MODEL THIS MIGHT BE? I WOULD LIKE TO GET A MANUAL FOR IT. THANKS . . .
The serial # of the tiller should be stamped directly above the right wheel on the transmission housing. This should give you more info to work from.
TROYBILT BRONCO REAR TINE TILLER Model#21A643B066…HOW DO I CHANGE MY ENGINE OIL?…WHERE IS THE DRAIN PLUG LOCATED?
The drain plug is generally located on either side of the engine near where the block bolts to the frame of the tiller. It can be a square headed plug or an allen socket head plug.
WHERE CAN IGET A CARABATOR FOR HH60-0509E ENGINE?
wish that help you .
Have a nice day
Tines won’t turn
Possible broken key where crankshaft meets gearbox.