John Deere

Experienced gardeners share their insights in answering this question :
More details are important. Does it still crank over? Have you taken it out of reverse and disengaged the deck/pto before attempting to start? If you have, have you tried pressing to the RIO button to see if it will help you start it. If one of the switches to tell the tractor that the implements are off is stuck/broken it can lead the tractor not to start as it thinks an unsafe condition is happening even when it isn’t. With my deere, I often forget to hit the RIO botton and when the motor starts to cough I remember what’s up quickly and push the button and just the left over engine momentum lets it re-fire without even stalling completely.

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

If your John Deere won`t crank and all you hear are clicking sounds when you turn the key, you likely have a bad battery or a bad connection somewhere between the battery and the starter. Double check that the alternator and battery connections are clean and tight.
The RIO is short for Reverse Implement Operation and is a standard safety feature on riding lawn mowers. This mechanism may be a button, lever, or key switch and must be engaged at the initial onset of reverse mowing or else the mower deck or engine will shut down.
An object or obstruction (such as an ant hill, clump of matted grass clippings or large tree branch) is jammed underneath the cutting deck or in the cutting deck drive system preventing the moving parts from engaging properly. Inspect for obstructions and carefully remove if necessary.
If the engine will not crank, you likely have a problem with… Discharged / defective battery or faulty electrical connections. To address these issues, check the battery and charging system for problems. Faulty parts: potentially the safety interlocks, starter motor switch (open circuit) or solenoid.
The Spark Plugs

The engine`s spark plugs get worn down and damaged over time due to use. A faulty spark plug can cause hard starts, low fuel consumption, and reduced performance. Spark plugs can be one of the first things you check when your tractor performance is off.

Reverse Implement Option (RIO) allows operator to mow while backing up if deemed necessary. Reverse Implement Option (RIO) allows operator to mow while backing up if deemed necessary. RIO switch. Mowing while backing up is strongly discouraged.
Loose, Dirty or Disconnected Spark Plug in Your Lawn Mower: Check it out, clean off debris, re-connect and tighten. Dirty Air Filter: Clean or replace. Fuel Not Reaching the Engine: Tap the side of the carburetor to help the flow of gas. If this doesn`t work, you might need a new fuel filter.
A dirty carburetor is one of the most common causes for a lawn mower not being able to start after sitting unused for months or years at a time.
The pulleys in your lawn tractor are driven by the drive belt, and turn the spindles. If a pulley doesn`t spin freely, it can cause the engine to die when the blades are engaged. To check the pulleys for sticking and damage, first remove the drive belt from the engine pulley and lift the lever to engage the blades.
Common problems on the list include things like uneven grass cutting, slipping belts, or minor engine problems. John Deere also claims that lighting issues and battery problems are common. Still, John Deere tractors are largely reputed for their reliability.
According to Raby, the primary reason a diesel tractor turns over but won`t start is because air is present somewhere in the fuel system. Running a tractor till it`s low or out of fuel and a clogged fuel filter are two of the more common ways air gets into the system.
Riding Mower Clicks but Doesn`t Crank

When you hear a click as you turn the key, a weak battery, bad starter solenoid, faulty wiring, failed starter motor or a seized engine could be the cause. This DIY troubleshooting will help you figure out what to fix.

According to Raby, the primary reason a diesel tractor turns over but won`t start is because air is present somewhere in the fuel system. Running a tractor till it`s low or out of fuel and a clogged fuel filter are two of the more common ways air gets into the system.
Check/clean/tighten all connections on battery/solenoid/starter/Ignition switch and neg(-) cable to frame or motor. Check to ensure all safety features are working properly and not engaged. Check for an inline fuse, bypass solenoid to see if engine cranks if it does replace solenoid, if no crank replace starter.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Why my blade wont engage on my toro 74370 zeroturn mower
ANSWER : It has an electromagnetic clutch switch on it,that is more than likely bad. Try this,pull the pto switch out and start the engine,then disconnect the 2 wires coming from the switch and just tap them together and see if they will come on. If they do then you need to replace that switch.

Read Full Q/A … : John Deere

Tines continue to work with out touching safety or throttle. they engage as soon as I start the engine.
ANSWER : Remove H (high) L (low) plastic caps to allow you to further adjust the flow and you will be going. H (red) further out about 11 threads exposed and L (low) about 8 exposed; adjusting the low side will stop the tines, but remove tines before making any adjustments, thanks

Read Full Q/A … : John Deere

Toro clear won't start – Toro Power Clear 621 R
ANSWER : Bad gas , plug ,air filter , no spark ck all need all 3 to start

Read Full Q/A … : John Deere

Does not run, will start with starting fluid – Mantis 2-Cycle Tiller
ANSWER : You should never use starting fluid on this model.

Add a couple of ounces of 100% acetone (available at Walmart) to some fresh fuel. Attempt to start for several pulls. Let sit for several minutes and repeat until it sounds like it wants to run.

Then watch this video and do it:

http://www.alamia.us/mantis_parts_s/148.htm

Read Full Q/A … : John Deere

Have a john deere sabre turn key won’t start thought battery was dead charged battery still won’t start jump start with car battery it will start then . try to engage reverse with blades running it shuts off. shut down tractor won’t start again .I,m thinking wiring not grounded but where or replacement switch somewhere.give best advise.
ANSWER : Some mowers have a mowing reverse safety switch. That safety will kill the mower if you try to reverse with the deck engaged. Some mowers even have an override button that has to be held while backing up. As for the battery thing, no matter how much you charge a bad battery you will not get it to start a mower if it has a bad cell or two. I would use a multimeter to check battery voltage, but the end result would still be the same, replace the battery.I hope this gets you going again.

Read Full Q/A … : John Deere

Strimmer wont start plug very dry when i remove it?
ANSWER : Sounds like the gas is not getting to the cylinder—remove carb and disassemble–make sure all jets are clear and the float valve moves freely.

Read Full Q/A … : John Deere

My toro groundmaster 225 wont start. I started it up, drove it to the front of the driveway and when I engaged the PTO it died and hasnt started since. I replaced the battery but still I get nothing. Ive tried spinning the blades manually to turn the engine over a few times before starting and that does nothing.
ANSWER : Check for a loose ground on your battery and for a blown fuse in the electrical system

Read Full Q/A … : John Deere

<!– from fixya rte –>Rj19lm plug gap for a 195cc 4cyl lawnboy – Lawn-Boy lawnboy" Mower Blade 21"
ANSWER : As a starting point in my shop i always use 0.30 in. For all my mowers

Read Full Q/A … : John Deere