uld get from a weak garden hose. Bought about 1 year ago and used about twice. Can it be repaired?
1550PSI Pressure Washer

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

The main reason which may cause the pressure washer to leak from the inside is if the cylinder head – either cracked or failed. This is often caused by the pressure washer being stored in an area that can freeze during winter.
If the machine is pulsing whilst in use, it may be that the accessory you are using has a blockage. Clear by soaking the accessory in warm soapy water and then rinsing out under the tap.
A pump leaking water indicates that there is something wrong such as bad water seals/packings or a broken ceramic plunger, or something minor like a leak o-ring. Any of these problems can be minor at first, but prolonged neglect can lead to bigger problems.
In most cases, the leak will be caused by a loose or punctured drain hose, a fault with the drain pump, or a worn-out tub-to-pump hose. If it is possible to run the washer without causing further damage, removing the access panel and then running the washer will allow you to observe where the leak is coming from.
The majority of leaking quick-connect fitting leaks are caused by a damaged O-ring, improper installation, eroded tubing, or too much torque placed on the tubing. Quick-connect fittings have a simple but powerful design.
One of the most common causes of a washing machine leak when not in use is debris caught in a water inlet valve. This is typically caused by a clog or obstruction within the valve, which prevents it from closing entirely and allowing water to escape.
PLEASE NOTE: You should always press the RESET button on the GFCI before using the pressure washer.
If a water pumping is leaking it cannot efficiently move coolant around the engine. If that happens the engine will get hotter and will eventually overheat. At first the temperature gauge will hit the red, then you`ll start seeing steam from under the hood.
Coolant leaks can occur for a number of reasons, but one of the most common is a bad water pump. If you notice coolant leaking from your vehicle, especially if it is coming from the front or back of the engine, it`s a good idea to have your water pump checked out by a mechanic.
This is a serious concern—water pressure that`s too high is difficult to contain, and could leak to plumbing leaks, worn seals, and damaged fixtures. It could even shorten the lifespan of your appliances that depend on a water connection like your washing machine, ice maker, dishwasher, and more.
Here`s how it works, devices from the Home & Garden range can be repaired in our repair centres. Machines within their warranty period are repaired free of charge subject to our Home & Garden terms and conditions.
This is a serious concern—water pressure that`s too high is difficult to contain, and could leak to plumbing leaks, worn seals, and damaged fixtures. It could even shorten the lifespan of your appliances that depend on a water connection like your washing machine, ice maker, dishwasher, and more.
A loose connection between the wall and the washers can also cause leaks alongside a washing machine hose. Leaking connections may result from the constant vibrations from your machine. To fix these leaks, simply tighten the hose connection.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Water is leaking from under the chrome piece inside my Karcher 3.68m pressure washer. Hose intake and outlet look good. Any sugeestions.
ANSWER : Plastic Pump Manifold is cracked.

Can be replace at a local Karcher Service Center,
or if you are mechanically handy.
Replacement Manifold Complete, is available from www.karcher.com.

If it is under 1 year old, and under warranty Karcher will replace if you have a Receipt proof of purchase.

Read Full Q/A … : 1550PSI Pressure Washer

Karcher Model K 2.40, water is leaking from the gun at yellow trigger.
ANSWER : You are going to have to purchase a new trigger gun, they don’t offer any parts for replacement on the inside of this trigger gun. See this link to purchase a new one.

Read Full Q/A … : 1550PSI Pressure Washer

Karcher 1150. Most of the water input is leaking out from under the machine and the remaining stream from the bayonet is similar to what one would get from a weak garden hose. Bought about 1 year ago and used about twice. Can it be repaired?
ANSWER :

Read Full Q/A … : 1550PSI Pressure Washer

My Karcher 2.36 is leaking at the inlet point can someone tell me how to fix it
ANSWER : This sounds like the o-ring inside the end of the high pressure hose could be damaged and is in need of replacing. If this is not the case you may need to have the inlet replaced.

Read Full Q/A … : 1550PSI Pressure Washer

Water leaking out of bottom of washer – Karcher 2500 PSI Pressure Washer
ANSWER : It sounds like water was left in the pump and i froze over the winter and cracked the pump housing. You can try taking the gun hose off and blow compressed air where the hose hooks on to blow waterwater out of the pump and dry the bottom. Then put some apoxy on the crack to seal it.

Read Full Q/A … : 1550PSI Pressure Washer

Hi, I have a Karcher 3.99. It’s going funny. When
ANSWER : Your internal sdeals have gone bad and need to be replaced. they sell kits for these that are inexpensive and the repair is usually pretty easily done

Read Full Q/A … : 1550PSI Pressure Washer

Water is leaking from the bottom of washer mower is running and some water is coming out
ANSWER : Ive seen this before, lots of people dont clean out there power washers when not in use, hard water build up is a big problem in these units witch cause the pump not to surge correctly, you should get it serviced, thankx

Read Full Q/A … : 1550PSI Pressure Washer

I loaned my K2.55 to somebody else and it is now heavely leaking just above the detergent housing element. It appears to come from under the metal cover (visible after I removed the plastic housing)

I want to send you a picture. How can I send that to you?
Ed

ANSWER : Ed,If you can send over a picture of where this leak is at I can advise you as to how to fix the problem. See contact info below. From your description it sounds like the leak is coming from behind the head of the pump which is commonly caused by failing water seals around the pistons.Sincerely,Aron KerrLanda [email protected]

Read Full Q/A … : 1550PSI Pressure Washer