not even moved. Any ideas what i am doing wrong?
How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
Visually inspect the blades and confirm there is no debris stopping the blades from moving. If there is debris ensure the machine is powered off when removing any blockages. Check the blades for any damage as a damaged cutting blade could cause the machine to stop working.
A clogged carburetor is most commonly caused by leaving fuel in the hedge trimmer for a long period of time. Over time, some of the ingredients in the fuel may evaporate, leaving behind a thicker, stickier substance. This sticky fuel can clog up the carburetor and cause the engine to stall or run roughly.
The first thing to do is to ensure that the battery is fully charged. If after charging the battery you are still experiencing the problem, then it may indicate a fault with either the battery or charger. The defective item will need to be replaced.
If you notice the branches you`re working on are being cut unevenly or are frayed, this is an sign that the blades need to be sharpened. Sharpening the blades may solve this issue without having to replace any parts. Another issue that you may encounter is bent teeth on your trimmer`s blades.
That means it`s not holding the blades securely against the clipper which will cause it to drag here. Also, make sure your screws are tight on your hinge. A lot of times the screws will back out and once again it`s not holding the blades properly on the clipper which will cause it to drag.
This can be due to corrosion, scratches or general wear. As a result, the cutting edges of the cutter comb of your blades are no longer sharp, reducing their ability to cut. Sharpening the blade is required to reface the cutting surfaces restore these sharp edges.
The powerful motor provides 3,000 strokes per minute for efficient, effortless trimming. Enjoy up to 35 minutes of runtime with the included 18V ONE+ 1.5Ah lithium battery. Easily tackle difficult hedges, bushes and shrubs with 22” blades and a 3/4” cut capacity.
If the drive shaft is broken, the string trimmer head won`t spin. The drive shaft is not repairable—if the drive shaft is broken, you must replace it. Need help finding your model number? If the threads on the drive shaft are stripped, the trimmer head will not stay on the shaft.
A clogged carburetor is most commonly caused by leaving fuel in the hedge trimmer for a long period of time. Over time, some of the ingredients in the fuel may evaporate, leaving behind a thicker, stickier substance. This sticky fuel can clog up the carburetor and prevent the engine from starting.
As such, we recommend sharpening after every 50 hours of use or so, to ensure consistent cutting performance and to enable you to enjoy your hedge trimmer for a long time to come. You can also find all the important information you need about sharpening your hedge trimmer in the operating instructions.
It`s not necessary to lubricate the blades of a hedge trimmer to prevent rusting because they are pre-hardened rust resistant steel. However, you can use a lubricant to clean the blades, we recommend a light spray on lubricant such as WD-40 to give a thin coating.
The blade drive is generally the biggest culprit in why freshly sharpened blades won`t cut. The blade drive holds the socket in place to drive the cutter evenly along the deck of the blade. Over time the drive/lever edges wear down and become rounded or worn which affects the performance of the clipper blade.
The possible causes of a lawn mower blade spinning but not cutting grass include a damaged or wrongly installed blade, a dull blade, or damaged lawnmower tires. Other possible reasons can be improper tire pressure, a clogged deck, or a broken mower belt.
It is possible that your guards or blades may be missing some parts. Carefully inspect your guards or blades to see if they are missing any teeth. Another cause for these cut gaps could be interference from foreign objects. Your blades may not be adjusted properly or you may have dull or rusted blades.
Top Reasons why your blades will not engage on your riding mower or tractor: Belt-the number one cause for your blades not to engage is that your belt is either stretched or loose causing it to slip or fall off completely. Belt could have snapped also.